Illumination dependence of I-V and C-V characterization of Au/InSb/InP(1 0 0) Schottky structure

The effects of surface preparation and illumination on electric parameters of Au/InSb/InP(100) Schottky diode were investigated, in the later diode InSb forms a fine restructuration layer allowing to block In atoms migration to surface. In order to study the electric characteristics under illumination, we make use of an He-Ne laser of 1 mW power and 632.8 nm wavelength. The current-voltage I(V_G), the capacitance-voltage C(V_G) measurements were plotted and analysed. The saturation current I_s, the serial resistance R_s and the mean ideality factor n are, respectively, equal to 2.03 × 10⁻⁵ A, 85 Ω, 1.7 under dark and to 3.97 × 10⁻⁵ A, 67 Ω, 1.59 under illumination. The analysis of I(V_G) and C(V_G) characteristics allows us to determine the mean interfacial state density N_ss and the transmission coefficient θ_n equal, respectively, to 4.33 × 10¹² eV⁻¹ cm⁻², 4.08 × 10⁻³ under dark and 3.79 × 10¹² eV⁻¹ cm⁻² and 5.65 × 10⁻³ under illumination. The deep discrete donor levels presence in the semiconductor bulk under dark and under illumination are responsible for the non-linearity of the C⁻²(V_G) characteristic.     

Multi-User MIMO Mobile CDMA Uplink System Employing Turbo Coding and Joint Detection Through a Multipath Rayleigh Fading Channel

In this paper, a generalized multiple-input multiple-output (MIMO) antenna system that can be fitted to the uplink of a wireless communication system is considered for the general case of multi-user. At the transmitter, the information bits are Turbo coded, then interleaved and passed through a serial-to-parallel converter. The channel is assumed bad urban suffering from multipath Rayleigh fading resulting in inter-symbol and multiple access interferences (ISI and MAI). At the front-end of the receiver, a number of receiving antennas are used followed by a joint multi-user estimator based on the Minimum Mean Square Error Block Linear Equalizer (MMSE-BLE).Computer simulations demonstrate a significant performance improvement in both single user and multi-user cases.This paper depends in parts on that presented at the 11th European Wireless Conference, Cyprus, Nicosia, pp. 187–192, April 2005. Yasmine A. Fahmy was born in Guiza, Egypt, on June 4, 1976. She received the B.Sc., M.Sc. and Ph.D. degrees in Communication and Electronics engineering from Cairo University, Egypt on 1999, 2001 and 2005 respectively. She is presently an assistant professor at Cairo University, Egypt. Her current field of interest is wireless communication and channel estimation. Hebat-Allah M. Mourad received her B.Sc., M. Sc. and Ph.D. degrees in electrical communication engineering from Cairo University, Egypt, in 1983, 1987 and 1994 respectively. Since 1983, she has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently associate professor there. Her research interests include optical fiber communications, mobile and satellite communications. Emad K. Al-Hussaini received his B.Sc degree in Electrical Communication Engineering from Ain-Shams University, Cairo, Egypt, in 1964 and his M.Sc and Ph.D. degrees from Cairo University, Giza, Egypt, in 1974 and 1977, respectively. From 1964 to 1970, he was with the General Egyptian Aeroorganization. Since 1970, he has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently professor there. He was a research fellow at Imperial College, London, UK, and at the Moore School of Electrical Engineering, University of Pennsylvania, Philadelphia, PA, USA, in the academic years 1976/1977 and 1981/1982, respectively. In 1990, he received the Egyptian national encouragement award for outstanding engineering research. He has written several papers for technical international journals and conferences. His research interests include signal processing, fading channel communication, modulation, and cellular mobile radio systems. Dr Al-Hussaini is a senior member of IEEE. He is listed in Marquis Whos Who in the World and in the IBC (International Biographical Center, Cambridge) for outstanding people of the 20th century.     

A novel capacitive pressure sensor structure with high sensitivity and quasi-linear responseUne nouvelle structure de capteur de pression capacitif avec haute sensibilitée et réponse quasi-linéaire

This paper describes a new capacitive structure of pressure sensor to increase simultaneously the sensitivity and the linearity of the transducer. This structure contains two capacitors which change in response to pressure, but in opposite senses. To increase even more the sensitivity of each capacitor, the pressure sensitive diaphragm carries a central boss. The optimal position and the length of the boss are also calculated. To cite this article: A. Ettouhami et al., C. R. Mecanique 332 (2004).     

The reaction of tetralones with nitriles: a simple approach to the synthesis of new substituted benzo[h]quinazolines, benzo[f]quinazolines and dibenzo[a,i]phenanthridines

The one-pot reaction of 1-tetralone with nitriles in the presence of triflic anhydride affords in good yields 2,4-disubstituted 5,6-dihydrobenzo[h]quinazolines, which oxidation with DDQ leads to the corresponding benzo[h]quinazolines. 2-Tetralone undergoes identical process forming 1,3-disubstituted 5,6-dihydrobenzo[f]quinazolines. However, when the reaction of 2-tetralone is carried out with methylthiocyanate as nitrile, 5-methylthiotetrahydrodibenzo[a,i]phenanthridines are isolated in good yields. Easy transformations of the methylthio group offer possible access to a variety of substituted dibenzo[a,i]phenanthridines.     

Probe metal binding mode of imine covalent organic frameworks: cycloiridation for (photo)catalytic hydrogen evolution from formate

Metalation of covalent organic frameworks (COFs) is a critical strategy to functionalize COFs for advanced applications yet largely relies on the pre-installed specific metal docking sites in the network, such as porphyrin, salen, 2,2′-bipyridine, etc. We show in this study that the imine linkage of simple imine-based COFs, one of the most popular COFs, readily chelate transition metal (Ir in this work) via cyclometalation, which has not been explored before. The iridacycle decorated COF exhibited more than 10-fold efficiency enhancement in (photo)catalytic hydrogen evolution from aqueous formate solution than its molecular counterpart under mild conditions. This work will inspire more functional cyclometallated COFs to be explored beyond catalysis considering the large imine COF library and the rich metallacycle chemistry.

This study describes cyclometallation as a new metal binding mode for imine-based COFs. The iridacycle decorated COF could be used for catalytic hydrogen evolution from aqueous formate solution with high stability and high efficacy.     

Modification of the cation exchange resin properties by impregnation in polyethyleneimine solutions: application to the separation of metallic ions

A commercial cation exchange resin Amberlite 200 has been modified after immersion in solutions of polyethyleneimine (PEI). The kinetic of fixation of the metallic ions have been determined. The modification of the surface of the resin deals with a change in the order of the affinities of the resins towards cations. The retention is the function of the formation and the stability of the complex. The conditions of modification (pH, PEI concentration and time of immersion) have been examined and the modification was confirmed by the determination of the exchange capacities, the distribution coefficient (P) and the selectivity factors (S). The obtained results revealed the effect of PEI on the exchange properties of the resin. The pH range selected (6-8) permitted a good adherence of PEI onto the resin surface. The quantity of the adsorbed PEI was increased by raising the initial concentration and the immersion period. The exchange capacity for copper ion passed from 2.6 mmol g⁻¹, in the case of unmodified resin, to 3.9 mmol g⁻¹ for the modified one.     

Synthesis of new two-photon absorbing fluorene derivatives via Cu-mediated Ullmann condensations

The Ullmann amination reaction was utilized to provide access to a number of fluorene analogues from common intermediates, via facile functionalization at positions 2, 7, and 9 of the fluorene ring. Through variation of amine or iodofluorene derivative, analogues bearing substitutents with varying electron-donating and electron-withdrawing ability, e.g., diphenylamino, bis-(4-methoxyphenyl)amine, nitro, and benzothiazole, were synthesized in good yield. The novel fluorene derivatives were fully characterized, including absorption and emission spectra. Didecylation at the 9-position afforded remarkably soluble derivatives. Target compounds 4, 5, and 9 are potentially useful as fluorophores in two-photon fluorescence microscopy. Their UV-vis spectra display desirable absorption in the range of interest suitable for two-photon excitation by near-IR femtosecond lasers. Preliminary measurements of two-photon absorption indicate the derivatives exhibit high two-photon absorptivity, affirming their potential as two-photon fluorophores. For example, using a 1,210 nm femtosecond pump beam, diphenylaminobenzothiazolylfluorene 4 exhibited nondegenerate two-photon absorption, with two-photon absorptivity (delta) of ca. 820 x 10(-50) cm(4) s photon(-1) molecule(-1) at the femtosecond white light continuum probe wavelength of 615 nm.     

Charge-transfer complexes of indenophanes with π-acceptors

The charge-transfer (CT) spectra of the -complexes formed by a number of -acceptors with several indenophanes as well as indene as a model compound have been measured in methylene chloride at 20 °C. Association constants and transition energies of these complexes as well as ionization potentials of the -donors have been determined. The data obtained indicate the existence of transannular electronic interactions in the indenophane nucleus. Furthermore, the pseudo-para- andmeta[2.2]indenophane isomers (3 and4) show a large difference in their -base strength. A good linear relationship has been observed between the association constants and _max of the long wavelength CT bands for the -complexes of these -donors with both tetracyanoethylene (TCNE) and 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ). All CT complexes studied have a 1:1 stoichiometry.

---

Charge-transfer-Komplexe aus Indenophanen und -Akzeptoren

Zusammenfassung Die Charge-transfer-Spektren (CT-Spektren) von -Komplexen aus Indenophanen bzw. der Modellverbindung Inden und verschiedenen -Akzeptoren wurden in Methylenchlorid bei 20 °C bestimmt. Die Assoziationskonstanten und Übergangsenergien dieser Komplexe sowie die Ionisationspotentiale der -Donatoren wurden ermittelt. Die Daten sprechen für das Vorliegen transannularer elektronischer Wechselwirkungen im Indenophan-System. Die isomeren pseudo-para- und -meta[2.2]indenophane3 und4 unterscheiden sich in ihrer -Basizität deutlich. Es besteht eine gute lineare Korrelation zwischen den Assoziationskonstanten und _max der langwelligen CT-Banden der verschiedenen -Donatoren mit Tetracyanoethylen (TCNE) und 2,3-Dichlor-5,6-dicyano-p-benzochinon (DDQ). Alle untersuchten CT-Komplexe besitzen 1:1-Stöchiometrie.

     

Transient and steady state creep of Al-4.5 wt.% Mg during phase transformation

Transient and steady state creep of Al-4.5 wt. % Mg alloy was studied under various constant stresses ranging from 91 MPa to 117 MPa in the temperature range from 473 K to 553 K. The results of creep characteristics have shown two main deformation temperature regions (below 493 K and above 513 K as well as a transient region between these temperatures). Peak values of transient creep parametersB andn were obtained at 493 K. The transient creep parameterB was related to the steady state creep rate _st through the exponent which was found to range from 0.85 to 0.5. The stress exponentm of the steady state creep has been found to be minimum at the steady state strain peaks, which is characteristic of dislocation climb along the grain boundaries. Microstructural analysis confirmed that the above mentioned mechanism took place in the dissolution region of-phase.