1-GHz-spaced 16-channel arrayed-waveguide grating for a wavelength reference standard in DWDM network systems

We fabricated a 1-GHz-spaced 16-channel arrayed-waveguide grating (AWG) by using a new AWG configuration where the path of each arrayed waveguide winds backward and forward across a 4-in diameter wafer without crossing any other waveguides. The ultra-narrow (< 1 GHz) and stable transmission bands of this AWG can be used to construct a wavelength reference standard covering the S, C, and L bands in the dense wavelength-division-multiplexing network systems whose frequency deviation is /spl plusmn/160 MHz.     

The Nonexistence of Procedures with Bounded Performance Characteristics in Certain Parametric Inference Problems

This paper gives a condition which implies the nonexistence of parametric statistical procedures with bounded risk or error performance characteristics. Many examples for which such a condition is satisfied are considered.     

A 6-ns ECL 100 K I/O and 8-ns 3.3-V TTL I/O 4-Mb BiCMOS SRAM

The authors report a 4 M word×1 b/1 M word×4 b BiCMOS SRAM that can be metal mask programmed as either a 6-ns access time for an ECL 100 K I/O interface to an 8-ns access time for a 3.3-V TTL I/O interface. Die size is 18.87 mm×8.77 mm. Memory cell size is 5.8 μm×3.2 μm. In order to achieve such high-speed address access times the following technologies were developed: (1) a BiCMOS level converter that directly connects the ECL signal level to the CMOS level; (2) a high-speed BiCMOS circuit with low threshold voltage nMOSFETs; (3) a design method for determining the optimum number of decoder gate stages and the optimum size of gate transistors; (4) high-speed bipolar sensing circuits used at 3.3-V supply voltage; and (5) 0.55-μm BiCMOS process technology with a triple-well structure     

A 1.8 Gb/s GaAs optoelectronic universal switch LSI withmonolithically integrated photodetector and laser driver

A high-speed monolithic optical interface switch LSI is developed using a GaAs MSM photodetector and large-scale integrated electric circuits. This LSI operates universally as a 1.8 Gb/s optical-input/optical-output four-channel time-division switch, a 1.8 Gb/s optical-input/electrical-output 1:4 demultiplexer, a 2.0 Gb/s electrical-output 4:1 multiplexer, and a 2.8 Gb/s electrical-input/electrical-output 4×4 space-division switch. It uses a new multistage 2×2 switch block with small hardware and high-speed operation. It can be expanded to a 16×16 optical-input/optical-output time-division switch operating at up to 1.8 Gb/s for broadband-ISDN     

Loss distribution measurement of silica-based waveguides by using ajaggedness-free optical low coherence reflectometer

The loss distributions in silica-based waveguides are successfully measured using a jaggedness-free optical reflectometer (OLCR). The OLCR reduces jagged fluctuations which appear in Rayleigh backscattering measurements undertaken with conventional OLCRs to within ±1 dB by averaging the wavelength-dependent Rayleigh backscatter signals. Constant loss distributions and a step-like loss increase in the waveguides were clearly observed     

A 220-MHz pipelined 16-Mb BiCMOS SRAM with PLL proportionalself-timing generator

This 512 Kw×8 b×3 way synchronous BiCMOS SRAM uses a 2-stage wave-pipeline scheme, a PLL self-timing generator and a 0.4-μm BiCMOS process to achieve 220 MHz fully-random read/write operations with a GTL I/O interface. Newly developed circuit technologies include: 1) a zig-zag double word-line scheme, 2) a centered bit-line load layout scheme, and 3) a phase-locked-loop (PLL) with a multistage-tapped ring oscillator which generates a clock cycle proportional pulse (CCPP) and a clock edge lookahead pulse (CELP)     

High-speed picosecond optical pulse compression from gain-switched 1.3-µm distributed feedback-laser diode (DFB-LD) through highly dispersive single-mode fiber

Picosecond optical pulse compression characteristics of chirped pulses from gain-switched distributed feedback-laser diodes (DFB-LD) transmitting through highly dispersive media are studied theoretically and experimentally. It is clarified theoretically that gain-switched chirped pulses can be compressed to about a 0.7-time bandwidth product by normal dispersion of the dispersive media and that the optimum dispersion value to obtain a minimum compressed pulse is proportional to the square of original pulsewidth. Through a dispersion, shifted single-mode fiber with -48-ps/nm normal dispersion at a 1.3-μm wavelength, gain-switched 30-ps (FWHM) pulses from a directly modulated 1.3-μm DFB-LD at a 4.4-GHz repetition rate have been successfully compressed to 6.4-ps optical pulses with a 0.86-time bandwidth product. Experimental results agree with the theoretical analysis.     

Direct dispersion measurement of highly-erbium-doped optical amplifiers using a low coherence reflectometer coupled with dispersive fourier spectroscopy

The group delay and dispersion, including the erbium ion contributions, of the highly erbium-doped silica planar waveguide amplifier and multicomponent glass fibre amplifiers are directly measured at different pump powers using a low coherence reflectometer and dispersive Fourier spectroscopy. This method derives the refractive index spectra of these amplifiers directly from the produced reflectograms without any physical or mathematical assumptions. The dispersion of the planar waveguide amplifier at 500 mW pumping changes between +300 and -200 ps/km/nm with a 0.4 wt.% erbium concentration.<>