Atomic layer deposition in nanometer-level replication of cellulosic substances and preparation of photocatalytic TiO2/cellulose composites

TiO2 replicas of filter paper with nanometer-level accuracy were prepared by atomic layer deposition of thin conformal TiO2 coating, followed by a removal of the paper by air-anneal at 450 degrees C. Photocatalytic anatase TiO2/cellulose composites were also made by leaving the paper intact. The TiO2 films were deposited from Ti(OMe)4 and H2O at 150-250 degrees C. The photocatalytic activity of the TiO2/cellulose composite was verified by photocatalytic reduction of Ag(I) from an aqueous solution to Ag nanoparticles on the TiO2 surface. The TiO2/cellulose composites are mechanically more stable than the free-standing TiO2 replicas and are therefore potentially suitable as lightweight, high surface area photocatalysts.     

Synthesis and Characterization of Optical Sol–Gel Adhesive for Military Protective Polycarbonate Resin

Sol–gel adhesive material for isostatic hotpressing lamination process was synthesized using 3-aminopropyltrimethoxysilane (APTES), 3-glycidyloxypropyltrimethoxysilane (GPTS) and methacryloxypropyltrimethoxysilane (MPTS) as precursors. Reaction dynamics between APTES and GPTS was followed on-line with Raman spectroscopy. The lamination process was optimized by varying hotpressing times and pressures at the constant temperature. Mechanical shear strength properties were found to be excellent for studied composition, 25–30 kg/cm² at its best. One possible application of laminated polycarbonate (PC) structure is a soldier helmet visor. Therefore, the ballistic protection properties were tested by shooting with 1.1 gram standard fragment, and determining the v₅₀ velocity value, which corresponds to 50% perforation. The laminated structure gave 5.7% better protection compared with the solid polycarbonate. The laminated components were found to have high optical transparency at the visible wavelengths as well as high environmental stability.     

Monitoring of yeast fermentation by ion mobility spectrometry measurement and data visualisation with Self-Organizing Maps

Ion mobility spectrometry (IMS) measurement combined with unsupervised neurocomputing is considered as a new potential method for on-line monitoring of fermentation and other processes producing volatile compounds that involve micro-organisms. This was demonstrated in a model system in which a strain of brewer’s yeast (Saccharomyces cerevisiae) was cultivated in a bench-top fermenter. Five phases of yeast growth could be detected from measurements of the exhaust gases from the fermenter, as indicated by the changes in ion mobility spectra analysed by computational methods.The data were first processed using the Self-Organizing Map (SOM) algorithm, the results showing that the phases of fermentation can be detected and identified. The cultivations were also shown by Sammon’s mapping to be comparable to a certain level of accuracy. Contaminated cultivation could be detected by its distinctive ion mobility spectrometry profile.     

Geometry prediction of hafnocenes by quantum chemical methods

The performance of quantum chemical methods for geometry prediction of hafnocenes was evaluated. HF, B3LYP and MP2 in combination with nonrelativistic (MHF) and relativistic (MWB and LANL2DZ) basis sets for hafnium together with standard basis sets 3-21G*, 6-31G* and 6-311G** for other elements were applied. Five basic structural parameters of the optimized structures of the hafnocenes were compared with experimental crystal structures obtained from the Cambridge structural database. Altogether 80 hafnocenes were included in the analysis. The results show that relativistic corrections are necessary for Hf atom. However, even the Hartree–Fock (HF) method, when combined with relativistic pseudopotentials, reproduces the experimental crystal structures with significant accuracy. The good performance of the HF method can be understood to originate from the absence of significant near-degeneracy correlations for hafnium. On average, the B3LYP and MP2 methods provide structural parameters somewhat closer to the experimental ones.     

Studies on lanthanoid sulfites. Part VIII. Thermogravimetric study of europium sulfite trihydrate

When Eu₂(SO₃)₃·3H₂O is heated in air it forms after dehydration two sulfite-sulfate phases: Eu₂(SO₃)₂SO₂ and Eu₂SO₃(SO₄)₂. The latter phase is thermally remarkably stable and decomposes above 700°C via Eu₂O₂SO₄ to Eu₂O₃. Anhydrous Eu₂(SO₃)₃ and Eu₂O₂SO₄ were also found as intermediates before Eu₂O₃ when the TG experiments were carried out in nitrogen but in other details the decomposition mechanism differs from that in air.

---

Zusammenfassung Eu₂(SO₃)₃·3H₂O bildet durch Erhitzen in Luft nach Dehydratation zwei Sulfit-Sulfat-Phasen: Eu₂(SO₃)₂SO₄ und Eu₂SO₃(SO₄)₂·Letztere ist thermisch bedeutend stabiler und zersetzt sich oberhalb 700°C über Eu₂O₂SO₄ zu Eu₂O₃. Bei Durchführung der TG-Experimente in Stickstoff wurden als Zwischenprodukte vor Eu₂O₃ auch wasserfreies Eu₂(SO₃)₃ und Eu₂O₂SO₄ gefunden, in anderen Details weicht jedoch der Mechanismus der Zersetzung von dem der Zersetzung in Luft ab.

---

- Eu/SO_3/2SO₄ Eu₂SO₃/SO_4/2. 700° Eu₂O₃ Eu₂O₂SO₄. Eu₂/SO_3/3 Eu₂O₂SO₄ , .

---

---

For Part VII, see ref. 6.     

Hole doping and superconductivity characteristics of the s=1, 2 and 3 members of the (Cu,Mo)-12s2 homologous series of layered copper oxides

Superconductivity characteristics have been systematically evaluated for a two-CuO₂-plane copper oxide system, (Cu,Mo)-12s2, upon increasing the number of fluorite-structured layers, s, between the two CuO₂ planes. Essentially single-phase samples of (Cu_0.75Mo_0.25)Sr₂YCu₂O_7+δ (s=1), (Cu_0.75Mo_0.25)Sr₂(Ce_0.45Y_0.55)₂Cu₂O_9+δ (s=2) and (Cu_0.75Mo_0.25)Sr₂(Ce_0.67Y_0.33)₃Cu₂O_11+δ (s=3) were synthesized through a conventional solid-state route in air. To make the samples superconductive an additional high-pressure oxygenation (HPO) treatment was required. Such treatment (carried out at 5 GPa and 500 °C in the presence of 75 mol% Ag₂O₂ as an oxygen source to maximize the T_c) compressed the crystal lattice for the three members of the (Cu_0.75Mo_0.25)-12s2 series equally, i.e., by 0.01 Å for the a parameter and by 0.07 Å for the c parameter per formula unit. From both Cu L-edge and O K-edge XANES spectra the s=1 sample was found to possess the highest overall hole-doping level among the HPO samples. Accordingly it exhibited the best superconductivity characteristics. With increasing s, both the T_c (s=1: 88 K, s=2: 61 K, s=3: 53 K) and H_irr values got depressed, being well explained by the trend of decreasing CuO₂-plane hole concentration with increasing s as revealed from O K-edge XANES spectra for the same samples. Hence, the present results do not suggest any significant (negative) impact on the superconductivity characteristics from the gradually thickened fluorite-structured block itself.     

In situ reaction mechanism studies on the atomic layer deposition of Al2O3 from (CH3)2AlCl and water

Reaction mechanisms between dimethylaluminum chloride and deuterated water in the atomic layer deposition (ALD) of Al2O3 were studied at 150-400 degrees C using a quartz crystal microbalance (QCM) and a quadrupole mass spectrometer (QMS). The observed reaction byproducts were DCl and CH3D. QMS showed that about one-third of the chlorine, and half of the methyl ligands were released during the (CH3)2AlCl pulse. The growth rate deduced from the QMS and QCM data was in qualitative agreement with the previously published growth rate from ALD film growth experiments.     

Polymerization of ethene with zirconocene catalysts: an experimental and quantum chemical study of the influence of para-substituent in benzyl in bis{η-(1-benzyl)indenyl}zirconium dichlorides

The meso- and rac-like isomers of bis{η⁵-(1-benzyl)indenyl}zirconium dichloride (5), bis{η⁵-(1-para-methoxybenzyl)indenyl}zirconium dichloride (6), bis{η⁵-(1-para-fluoro-benzyl)indenyl}zirconium dichloride (7) and bis{η⁵-(1-phenylethyl)indenyl}zirconium dichloride (8) were synthesized and isolated. Solid-state structures of meso- and rac-like 5 were determined by X-ray structure analysis. Polymerization properties of the methylaluminoxane (MAO) activated diastereomers of complexes 5-8 were studied in ethene polymerizations under different monomer concentrations. The rac-like isomer of 1-phenylethyl-substituted 8/MAO showed significantly higher activity than the 1-benzyl substituted analogs 5-7/MAO. In addition, rac-8/MAO behaves like a single center catalyst producing polyethene with narrow molar mass distribution (1.8-1.9), while diastereomers of 5-7/MAO produce polymers with molar mass distributions varying from 2.7 up to 10.3. The rac and meso-like isomers of 5-7/MAO have different response on the monomer concentration. Quantum chemical calculations suggest a strong interaction between the benzyl substituent and the electron deficient zirconium center. The phenyl metal coordination energies depend on the electronic properties of the para-substituent. In 8/MAO, due to the ethyl spacer, the coordination does not have a significant role and therefore much higher activity and single center polymerization behavior is observed.     

Alnumycins A2 and A3: new inverse-epimeric pairs stereoisomeric to alnumycin A1

Two new pairs of stereoisomeric alnumycin As, A2 {(2)-(1R,1′RS,4′SR,5′SR)} and A3 {(2)-(1R,1′RS,4′SR,5′RS)}, are described. Similar to alnumycin A1 {(2)-(1R,1′RS,4′RS,5′SR)}, each of these naturally occurring compounds is also a pair of C-1 inverse epimers. The relative configurations of the dioxane ring sidechains were assigned on the basis of ¹H NMR NOE contacts and molecular modeling using density functional theory (DFT) at the M06-2X/6-31G(d) level of theory. The absolute configurations of C-1 and the determination of inverse epimeric relationships were achieved by experimental electronic circular dichroism (ECD) measurements, with both aspects confirmed by using the chiral derivatizing agent (CDA) Mosher′s acid chloride {α-methoxy-α-trifluorophenylacetyl chloride (MTPACl)} to effect enantiodifferentiation. The absolute configurations of the dioxane ring using the CDA could only be effected in the case of alnumycin A1, the results of which were in agreement with previous assignments. The dioxane ring conformational mobility and the likely interaction between the MTPA groups coupled with the structural novelty of the diols in the dioxane ring with respect to CDA analysis precluded an absolute configuration assignment for alnumycins A2 and A3 based on empirical comparisons or by computational analysis of through-space NMR shieldings (TSNMRS) emanating from the phenyl groups of the MTPA moieties.