Key processing with control vectors

A method is presented for controlling cryptographic key usage based on control vectors. Each cryptographic key has an associated control vector that defines the permitted uses of the key within the cryptographic system. At key generation, the control vector is cryptographically coupled to the key by way of a special encryption process. Each encrypted key and control vector are stored and distributed within the cryptographic system as a single token. Decryption of a key requires respecification of the control vector. As part of the decryption process, the cryptographic hardware verifies that the requested use of the key is authorized by the control vector. This article focuses mainly on the use of control vectors in cryptosystems based on the Data Encryption Algorithm.     

Direct Observation of an Oxepin from a Bacterial Cytochrome P450‐Catalyzed Oxidation

The cytochromes P450 are hemoproteins that catalyze a range of oxidative C?H functionalization reactions, including aliphatic and aromatic hydroxylation. These transformations are important in a range of biological contexts, including biosynthesis and xenobiotic biodegradation. Much work has been carried out on the mechanism of aliphatic hydroxylation, implicating hydrogen atom abstraction, but aromatic hydroxylation is postulated to proceed differently. One mechanism invokes as the key intermediate an arene oxide (and/or its oxepin tautomer). Conclusive isolation of this intermediate has remained elusive and, currently, direct formation of phenols from a Meisenheimer intermediate is believed to be favored. We report here the identification of a P450 [P450_cam (CYP101A1) and P450_cin (CYP176A1)]‐generated arene oxide as a product of in vitro oxidation of tert‐butylbenzene. Computations (CBS‐QB3) predict that the arene oxide and oxepin have similar stabilities to other arene oxides/oxepins implicated (but not detected) in P450‐mediated transformations, suggesting that arene oxides can be unstable terminal products of P450‐catalyzed aromatic oxidation that can explain the origin of some observed metabolites.     

Characterization and optimization of heroin hapten-BSA conjugates: method development for the synthesis of reproducible hapten-based vaccines

A potential new treatment for drug addiction is immunization with vaccines that induce antibodies that can abrogate the addictive effects of the drug of abuse. One of the challenges in the development of a vaccine against drugs of abuse is the availability of an optimum procedure that gives reproducible and high yielding hapten-protein conjugates. In this study, a heroin/morphine surrogate hapten (MorHap) was coupled to bovine serum albumin (BSA) using maleimide-thiol chemistry. MorHap-BSA conjugates with 3, 5, 10, 15, 22, 28, and 34 haptens were obtained using different linker and hapten ratios. Using this optimized procedure, MorHap-BSA conjugates were synthesized with highly reproducible results and in high yields. The number of haptens attached to BSA was compared by 2,4,6-trinitrobenzenesulfonic acid (TNBS) assay, modified Ellman’s test and matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS). Among the three methods, MALDI-TOF MS discriminated subtle differences in hapten density. The effect of hapten density on enzyme-linked immunosorbent assay (ELISA) performance was evaluated with seven MorHap-BSA conjugates of varying hapten densities, which were used as coating antigens. The highest antibody binding was obtained with MorHap-BSA conjugates containing 3–5 haptens. This is the first report that rigorously analyzes, optimizes and characterizes the conjugation of haptens to proteins that can be used for vaccines against drugs of abuse. The effect of hapten density on the ELISA detection of antibodies against haptens demonstrates the importance of careful characterization of the hapten density by the analytical techniques described.     

Role of surface ligands in optical properties of colloidal CdSe/CdS quantum dots

In order to study the role of surface ligands in determining optical properties of colloidal quantum dots (QDs), we have selectively fabricated and studied CdSe/CdS core-shell QDs with strongly confined electron and hole states attached with commonly used surface ligands. Optical properties, viz. absorption and fluorescence of these QDs, are characterized from which salient changes have been observed for different ligand substitutions which, through theoretical analysis, can be associated with electronic structure properties of the QD-ligand composite systems, in particular localization of wave functions of electrons and holes in the QDs and the band matching of the HOMO-LUMO gap of the ligands. The findings can be utilized to facilitate the understanding and optimization of properties of QD biomarkers with functionalizing surface ligands for targeting cellular objects.     

ATM cell encryption and key update synchronization

This paper presents a data compaction/randomization based approach as a mode of block encryption for ATM (Asynchronous Transfer Mode) cells. The presented approach converts a plaintext into pseudo‐random plaintext before ciphering to conceal patterns in the plaintext. The underlying idea behind this scheme is the Shannon's principles of “confusion” and “diffusion” which involve breaking dependencies and introducing as much randomness as possible into the ciphertext. In this scheme, confusion and diffusion are introduced into the system by first compressing the ATM cell payload and then spreading a continuously changing random data over the entire content of the cell. As a mode of operation for block ciphering, this scheme offers the following attractive features:(i) plaintext patterns are pseudo‐randomized and chained with ciphertext (thereby, preventing against “dictionary”, “known plaintext”, and “statistical analysis” attacks), (ii) it is self‐synchronizing, (iii) cell loss has no additional negative effect, (iv) no IV (Initialization Vector) storage is required, (v) it is encryption‐algorithm independent, (vi) there is no cell‐to‐cell dependency (no feedback from previous cells), and (vii) it is highly scalable (i.e., cells from the same stream can be ciphered and deciphered in parallel). This paper also presents a secure mechanism for in‐band synchronization of encryption/decryption key updates using a “marker‐cell” that is carried within the data channel. An important aspect of both the above mechanisms is that they do not require any changes to the ATM cell header or ATM infrastructure. This revised version was published online in June 2006 with corrections to the Cover Date.     

Decision-Aided Tracking Loops for Channels with Phase Jitter and Intersymbol Interference

The theory of decision-aided carrier tracking loops as developed by Lindsey and Simon is extended to include the effects of intersymbol interference. A major theoretical result is the solution of the Fokker-Planck equation for the probability density function (pdf) of the phase error for a first-order tracking loop. This function is used to average upper and lower bounds on the demodulator error rate so that an estimate of the overall system error rate may be obtained. The modulation technique analyzed is double-sideband-pulse-amplitude pulse-amplitude modulation. Curves are presented which display the threshold performance of the system error rate at low modulation index.     

Demand assignment for light-route TDMA

With the fluctuating inter-nodal traffic levels that characterize light-route networks, demand assignment (DA) provides the means of increasing the system's effective capacity. This paper focuses on the application of DA in light-route TDMA, and proposes a control architecture that is well-suited to service of heterogeneous traffic. The major advantage of the proposed architecture is its benefit from both the efficient resource management typical of centralized schemes, and the shorter response times of distributed schemes. The impact of the assignment algorithm on the grade of service to heterogeneous populations, and the difficulty in quantifying this impact are also addressed. Results from analytical and simulation models illustrating resource utilization are presented.     

Analysis of volatile organic compounds in indoor environments using thermal desorption with comprehensive two‐dimensional gas chromatography and high‐resolution time‐of‐flight mass spectrometry

Building‐related health effects are frequently observed. Several factors have been listed as possible causes including temperature, humidity, light conditions, presence of particulate matter, and microorganisms or volatile organic compounds. To be able to link exposure to specific volatile organic compounds to building‐related health effects, powerful and comprehensive analytical methods are required. For this purpose, we developed an active air sampling method that utilizes dual‐bed tubes loaded with TENAX‐TA and Carboxen‐1000 adsorbents to sample two parallel air samples of 4 L each. For the comprehensive volatile organic compounds analysis, an automated thermal desorption comprehensive two‐dimensional gas chromatography high‐resolution time‐of‐flight mass spectrometry method was developed and used. It allowed targeted analysis of approximately 90 known volatile organic compounds with relative standard deviations below 25% for the vast majority of target volatile organic compounds. It also allowed semiquantification (no matching standards) of numerous nontarget air contaminants using the same data set. The nontarget analysis workflow included peak finding, background elimination, feature alignment, detection frequency filtering, and tentative identification. Application of the workflow to air samples from 68 indoor environments at a large hospital complex resulted in a comprehensive volatile organic compound characterization, including 178 single compounds and 13 hydrocarbon groups.     

Towards Efficient Integrated Perovskite/Organic Bulk Heterojunction Solar Cells: Interfacial Energetic Requirement to Reduce Charge Carrier Recombination Losses

Integrated perovskite/organic bulk heterojunction (BHJ) solar cells have the potential to enhance the efficiency of perovskite solar cells by a simple one‐step deposition of an organic BHJ blend photoactive layer on top of the perovskite absorber. It is found that inverted structure integrated solar cells show significantly increased short‐circuit current (J_sc) gained from the complementary absorption of the organic BHJ layer compared to the reference perovskite‐only devices. However, this increase in J_sc is not directly reflected as an increase in power conversion efficiency of the devices due to a loss of fill factor. Herein, the origin of this efficiency loss is investigated. It is found that a significant energetic barrier (≈250 meV) exists at the perovskite/organic BHJ interface. This interfacial barrier prevents efficient transport of photogenerated charge carriers (holes) from the BHJ layer to the perovskite layer, leading to charge accumulation at the perovskite/BHJ interface. Such accumulation is found to cause undesirable recombination of charge carriers, lowering surface photovoltage of the photoactive layers and device efficiency via fill factor loss. The results highlight a critical role of the interfacial energetics in such integrated cells and provide useful guidelines for photoactive materials (both perovskite and organic semiconductors) required for high‐performance devices.     

Mechanistic investigation of the iridium-catalysed alkylation of amines with alcohols

The [Cp*IrCl(2)](2)-catalysed alkylation of amines with alcohols was investigated using a combination of experimental and theoretical methods. A Hammett study involving a series of para-substituted benzyl alcohols resulted in a line with a negative slope. This clearly documents that a positive charge is built up in the transition state, which in combination with the measurement of a significant kinetic isotope effect determines hydride abstraction as being the selectivity-determining step under these conditions. A complementary Hammett study using para-substituted anilines was also carried out. Again, a line with a negative slope was obtained suggesting that nucleophilic attack on the aldehyde is selectivity-determining. A computational investigation of the entire catalytic cycle with full-sized ligands and substrates was performed using density functional theory. The results suggest a catalytic cycle where the intermediate aldehyde stays coordinated to the iridium catalyst and reacts with the amine to give a hemiaminal which is also bound to the catalyst. Dehydration to the imine and reduction to the product amine also takes place without breaking the coordination to the catalyst. The fact that the entire catalytic cycle takes place with all the intermediates bound to the catalyst is important for the further development of this synthetic transformation.