A simple,rapid and sensitive method based on modified multiwalled carbon nanotube for preconcentration and determination of lead ions in aqueous media in natural pHs

In this study, multiwalled carbon nanotube (MWCNT) was modified by the pyridine group using a silane agent and characterized by infrared spectroscopy (IR), thermal analysis (TG/DTA), and elemental analysis (CHN) and scanning electron microscopy (SEM). The application of this sorbent was investigated in determination of lead ions in aqueous samples, using flame atomic absorption spectrometry (FAAS). Through this study, different parameters such as pH and sample flow rate on adsorption process and eluent concentration, volume and flow rate were optimized. The limit of detection (LOD), the relative standard deviation and the recovery of the method were 2 ng mL^?1, 1.3% and 99.7%, respectively. Two standard reference materials (NIST 1571 and NIST 1572) were used to verify accuracy of this method. Finally, the sorbent was successfully applied for extraction and determination of low levels of Pb(II) ions in aqueous samples.     

Mixed formulations for a class of variational inequalitiesFormulations mixtes pour une classe d'inéquations variationnelles

This Note is an attempt to extend the mixed finite element method to a class of variational inequalities including the problems of Signorini and of unilateral contact in elasticity with or without friction. Existence and uniqueness for the continuous and the discrete problems as well as error estimates are established in a general abstract framework. As a result, the mixed approximation of the Signorini problem is proved to converge with an error bound in h^3/4. To cite this article: L. Slimane et al., C. R. Acad. Sci. Paris, Ser. I 334 (2002) 87–92     

Syntheses of 5‐alkylthio‐1,3‐diaryl‐1,2,4‐triazoles

Arylation of the readily available 3‐alkythio‐5‐aryl‐1,2,4‐triazoles gave 5‐alkylthio‐1,3‐diaryl‐1,2,4‐triazoles in moderate yield. The structures of the latter were confirmed by NOE and ¹³C‐NMR.     

Nuclear spin relaxation study of aqueous raffinose solution in the presence of a gadolinium contrast agent

Paramagnetic enhancement of nuclear spin-lattice relaxation rates (PREs) was measured in aqueous solution of the trisaccharide raffinose in the presence of a gadolinium(III) complex, GdDTPA-BMA, used as a magnetic resonance imaging contrast agent. The relaxation enhancement of aqueous protons was measured over a broad range of magnetic fields, using field-cycling apparatus in addition to conventional spectrometers. The nuclear magnetic relaxation dispersion profile thus obtained was interpreted with a recently developed model, allowing for both inner- and outer-sphere relaxation. The relaxation enhancement for the carbon-13 nuclei in raffinose was studied under high-resolution conditions at three magnetic fields, whereas the sugar proton PRE was measured at two fields. The PRE of the sugar nuclei could be interpreted in a consistent way, assuming that it was caused by the outer-sphere mechanism. The electron spin relaxation was found to be a less important source of modulation of the electron-nuclear dipole-dipole interaction than the mutual translational diffusion.     

Cooperative effects in phospholipid monolayers induced by a peptide from HIV-1 capsid protein

The study of interactions between biological molecules and model membranes is essential for the understanding of a number of physiological mechanisms involved in viral infections and dissemination. In this paper, the analysis of the interaction between a peptide from the p24 protein of Human Immunodeficiency Virus type 1 (HIV-1) and a phospholipid monolayer has pointed to a cooperative response in which very small amounts of peptide p24-1 (e.g. 0.05 mol%) can lead to measurable effects. Monolayer surface pressure and surface potential isotherms were affected for peptide concentrations as low as 0.05 mol%, with saturation at 0.5 mol%. The expansion effect from p24-1 is confirmed by changes in morphology of the monolayers using Brewster angle microscopy. Even though p24-1 is disordered in aqueous solutions, the interaction with dipalmitoyl phosphatidylcholine (DPPC) causes it to adopt an alpha-helix structure, as shown by circular dichroism (CD) data for multilamellar vesicles (MLV). The expansion of the phospholipid monolayer in a cooperative way may imply that p24-1 has potential antiviral activity, by participating in the cell rupture, with no need of specific receptors in the membrane.     

Cyclo- and carbomagnesiation of 1,2-dienes catalyzed by Zr complexes

Cyclo- and carbomagnesiation of 1,2-dienes with EtMgR′ (R′=Et, Br) in the presence of Cp₂ZrCl₂ catalyst lead to alkylidenemagnesiocyclopentanes. Deuterolysis provides insights into the reaction pathways.     

Interfacial Connections between Organic Perovskite/n+ Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

The rapidly increasing solar conversion efficiency (PCE) of hybrid organic–inorganic perovskite (HOIP) thin-film semiconductors has triggered interest in their use for direct solar-driven water splitting to produce hydrogen. However, application of these low-cost, electronic-structure-tunable HOIP tandem photoabsorbers has been hindered by the instability of the photovoltaic-catalyst-electrolyte (PV+E) interfaces. Here, photolytic water splitting is demonstrated using an integrated configuration consisting of an HOIP/n⁺silicon single junction photoabsorber and a platinum (Pt) thin film catalyst. An extended electrochemical (EC) lifetime in alkaline media is achieved using titanium nitride on both sides of the Si support to eliminate formation of insulating silicon oxide, and as an effective diffusion barrier to allow high-temperature annealing of the catalyst/TiO₂-protected-n⁺silicon interface necessary to retard electrolytic corrosion. Halide composition is examined in the (FA_1-xCs_x)PbI₃ system with a bandgap suitable for tandem operation. A fill factor of 72.5% is achieved using a Spiro-OMeTAD-hole-transport-layer (HTL)-based HOIP/n⁺Si solar cell, and a high photocurrent density of −15.9 mA cm⁻² (at 0 V vs reversible hydrogen electrode) is attained for the HOIP/n⁺Si/Pt photocathode in 1 m NaOH under simulated 1-sun illumination. While this thin-film design creates stable interfaces, the intrinsic photo- and electro-degradation of the HOIP photoabsorber remains the main obstacle for future HOIP/Si tandem PEC devices.     

Comparative Studies on the Behavior of 3-Amino-2-phenyl-4(3 H )-quinazolinone Towards Some Organophosphorus Reagents

The reaction of 3-amino-2-phenyl-4(3H)-quinazolinone with oxovinylidenetriphenylphosphorane afforded 5-phenylpyrazolo[1,5-c] quinazoline-2(3H)-one and triphenylphosphine oxide. On the other hand, when quinazolinone reacts with phosphorus ylides, the corresponding phosphorane adducts were obtained. Moreover, quinazolinone reacts with trisdialkylaminophosphines to give the new (dialkylamino)oxophosphonium dipolar products. Possible reaction mechanisms are considered and the structural assignments are based on analytical and spectroscopic results.     

Decomposition of Triethylamine Over Acid Catalysts

The effect of hydrochloric acid, boric acid, and silica content in alumina on its catalytic activity towards the decomposition of triethylamine was investigated at 310°, 320°, and 330°. The study was carried out in a flow system and the reaction product was analyzed chromotographically. Ethylene formation is a zero order reaction independent of the partial pressure of triethylamine. Treating γ-alumina with hydrochloric acid increases its catalytic activity towards ethylene formation whereas silica-alumina is less active than γ-alumina. Boric acid-treated alumina has the same activity of γ-alumina. Formation of ethylene from preadsorbed triethylamine was studied. The similarity between reactions of aliphatic alcohols and amines over acid catalysts is concluded.     

A novel low voltage very low power CMOS class AB current output stage with ultra high output current drive capability

In this paper a novel low voltage (LV) very low power (VLP) class AB current output stage (COS) with extremely high linearity and high output impedance is presented. A novel current splitting method is used to minimize the transistors gate–source voltages providing LV operation and ultra high current drive capability. High linearity and very high output impedance are achieved employing a novel resistor based current mirror avoiding conventional cascode structures to be used. The operation of the proposed COS has been verified through HSPICE simulations based on TSMC 0.18 μm CMOS technology parameters. Under supply voltage of ±0.7 V and bias current of 5 μA, it can deliver output currents as high as 14 mA with THD better than ?53 dB and extremely high output impedance of 320 MΩ while consuming only 29 μW. This makes the proposed COS to have ultra large current drive ratio (I_outmax/I_bias or the ratio of peak output current to the bias current of output branch transistors) of 2800. By increasing supply voltage to ±0.9 V, it can deliver extremely large output current of ±24 mA corresponding to 3200 current drive ratio while consuming only 42.9 μW and exhibiting high output impedance of 350 MΩ. Interestingly, the proposed COS is the first yet reported one with such extremely high output current and a THD even less than ?45 dB. Such ultra high current drive capability, high linearity and high output impedance make the proposed COS an outstanding choice for LV, VLP and high drive current mode circuits. The superiority of the proposed COS gets more significance by showing in this work that conventional COS can deliver only ±3.29 mA in equal condition. The proposed COS also exhibits high positive and negative power supply rejection ratio (PSRR+/PSRR?) of 125 dB and 130 dB, respectively. That makes it very suitable for LV, VLP mixed mode applications. The Monte Carlo simulation results are provided, which prove the outstanding robust performance of the proposed block versus process tolerances. Favorably the proposed COS resolves the major limitation of current output stages that so far has prevented designing high drive current mode circuits under low supply voltages. In brief, the deliberate combination of so many effective novel methods presents a wonderful phenomenal COS block to the world of science and engineering.