A differential scanning calorimetry method to determine the isothermal crystallization kinetics of cocoa butter

This research aimed to reduce the variability on the data obtained from differential scanning calorimetric (DSC) analysis of the isothermal crystallization kinetics of cocoa butter.

To enable transformation of the DSC crystallization peak to a sigmoid crystallization curve, the DSC peak area has to be integrated. Usually, the start and end points of the crystallization peak are determined visually. The result of this visual determination appeared to be very much dependent on the operator, but also differed considerably when the same operator performed the integration several times. By proposing an objective calculation algorithm to determine the start and end points of integration, the variability caused by the operator during the integration procedure could be eliminated. Furthermore, sample preparation and the DSC heating protocol to melt the sample prior to crystallization were studied. Three heating protocols (65 °C for 15 min, 65 °C for 30 min and 80 °C for 15 min) were compared and it was shown that holding at 65 °C for 15 min was sufficient to eliminate any influence of sample history. Two different sample preparation procedures were compared and it appeared that a change in sample preparation procedure had a significant influence on the measured crystallization process. It is thus important to keep this method constant to eliminate the variability caused by it.     

Determination of generalized quadrangles with distinct elation points

In this paper, we classify the finite generalized quadrangles of order (s,t), s,t > 1, which have a line L of elation points, with the additional property that there is a line M not meeting L for which {L, M} is regular. This is a first fundamental step towards the classification of those generalized quadrangles having a line of elation points. Mathematics Subject Classification (2000): 51E12, 51E20, 20B25, 20E42     

Properties of levels in22Ne

Levels up to 9.3 MeV excitation in²²Ne were studied with the¹⁹ F(α, pγ) ²²Ne reaction atE _α = 12 MeV. Level energies, branching ratios, mean lifetimes, spins and mixing ratios were obtained for a number of levels. Relevant results are compared with many-particle shell-model calculations.     

Trace anion determination in concentrated hydrofluoric acid solutions by two-dimensional ion chromatography I. Matrix elimination by ion-exclusion chromatography

Since years, ion exclusion chromatography (ICE) has been the standard method to separate strong acid analyte anions from concentrated weak acid matrices such as hydrofluoric acid (HF). In this work, the commercially available IonPac ICE-AS 1 column was used to separate trace levels of chloride, nitrate, sulfate and phosphate from HF solutions at 20% (w/w). The efficiency of the separation was studied in more detail using techniques such as ion chromatography (IC), inductively coupled plasma optical emission spectrometry (ICP-OES) and ICP-mass spectrometry (ICP-MS). For 20% (w/w) HF solutions and at a water carrier flow-rate of 0.50 ml/min, the cut window was set from 8.5 to 14.5 min. Under these conditions, analyte recoveries of better than 90% were obtained for chloride, nitrate and sulfate, but only about 75% for phosphate. The HF rejection efficiency was better than 99.9%. It was found that the ICP techniques, measuring total element levels and not species, yielded significantly higher recoveries for phosphorus and sulfur compared to IC. Evidence will be given that part of the added phosphorus (approximately 15% for an addition of 10 mg PO4/kg) is present as mono-fluorophosphoric acid (H2FPO3). In the case of sulfate, the difference between IC and ICP-MS could be attributed to an important matrix effect from the residual HF concentration.     

Synthesis of (E)- and (Z)-fluoro-olefin analogues of potent dipeptidyl peptidase IV inhibitors

(E)- and (Z)-fluoro-olefin analogues of potent dipeptidyl peptidase IV inhibitors were synthesized. A Wadsworth-Horner-Emmons reaction, followed by amide formation and reduction of the amide were used for the construction of the α-fluoro-α,β-unsaturated amine functionality.     

Three-dimensional nonlinear optical chromophores based on metal-to-ligand charge-transfer from ruthenium(II) or iron(II) centers

In this article, we describe a series of new complex salts in which electron-rich transition-metal centers are coordinated to three electron-accepting N-methyl/aryl-2,2':4,4' ':4',4' '-quaterpyridinium ligands. These complexes contain either Ru(II) or Fe(II) ions and have been characterized by using various techniques, including electronic absorption spectroscopy and cyclic voltammetry. Molecular quadratic nonlinear optical (NLO) responses beta have been determined by using hyper-Rayleigh scattering at 800 nm and also via Stark (electroabsorption) spectroscopic studies on the intense, visible d --> pi* metal-to-ligand charge-transfer bands. The latter experiments reveal that these putatively octupolar D(3) chromophores exhibit two substantial components of the beta tensor which are associated with transitions to dipolar excited states. Computations involving time-dependent density-functional theory and the finite field method serve to further illuminate the electronic structures and associated linear and NLO properties of the new chromophoric salts.     

Capacitive-discharge-heated anisotropic pyrolytic graphite furnace used for atomic absorption spectrometry Part 2. Experimental Verification of Temperature Distribution of the Furnace Surface and of the Gas Phase

The predictions of a theoretical model, embodied in a computer program, describing the heating characteristics of the furnace surface and the gas phase of an anisotropic pyrolytic graphite furnace heated by the capacitive discharge technique are compared with the experimental results obtained by optical pyrometry and by two-line atomic absorption spectrometry, respectively. The surface temperature gradient around the circumference of the type 1 furnace and along the optical axis of the type 3 furnace are calculated and compared with the measured temperatures. The weighted-average of the theoretically predicted gas temperature is in reasonable agreement with the effective vapour temperature measured by two-line atomic absorption method. The heating rate of the furnace does not have a significant effect on the temperature distribution of either the furnace surface or the gas phase. The effect of the difference in the temperature distribution of the type 1 and type 3 furnaces on the atomic absorption signals is also discussed.     

Evaluation of automated nano-electrospray mass spectrometry in the determination of non-covalent protein-ligand complexes

The use of electrospray ionization mass spectrometry (ESI-MS) for studying non-covalent interactions between macromolecules and ligands is well established. ESI-MS can be a useful tool for the determination of dissociation constants between molecules in the gas phase. We validate this method by studying the binding of the catalytic domain of cellobiohydrolase I (CBH I) from Trichoderma reesei to the disaccharide inhibitor cellobiose. The method was further applied to study two newly synthesized cellobiose derivatives (m-iodobenzyl 2-deoxy-2-azido-beta-cellobioside and p-benzyloxybenzyl beta-cellobioside). In a titration experiment, peak areas of different charge states of the free enzyme and the complex were summed in order to determine the dissociation constant. For cellobiose and m-iodobenzyl 2-deoxy-2-azido-beta-cellobioside, the calculated values are in good agreement with those reported from either displacement titration or equilibrium binding experiments in solution. Due to non-specific binding, the dissociation constant of p-benzyloxybenzyl beta-cellobioside does not correspond with the solution-based value. Our results indicate the need for careful interpretation of data sets when using nanoESI to study non-covalent interactions.     

Relaxometric study of copper [15]metallacrown-5 gadolinium complexes derived from alpha-aminohydroxamic acids

Proton nuclear magnetic relaxation dispersion (NMRD) profiles were recorded between 0.24 mT and 1.4 T for lanthanum(III)- and gadolinium(III)-containing [15]metallacrown-5 complexes derived from alpha-aminohydroxamic acids and with copper(II) as the ring metal. The influence of the different R-groups on the proton relaxivity was investigated, and a linear relationship between the relaxivity and the molecular mass of the metallacrown complex was found. The selectivity of the metallacrown complexes was tested by transmetalation experiments with zinc(II) ions. The crystal structure of the copper [15]metallacrown-5 gadolinium complex with glycine hydroximate ligands is reported.     

SPOCC-194, a new high functional group density PEG-based resin for solid-phase organic synthesis

A novel polymer matrix for solid-phase synthesis, SPOCC(194) resin (1), was designed featuring a backbone of homogeneous tetraethylene glycol (TEG(194)) macromonomer linked by quaternary carbon junctions and terminating in primary alcohol functionality. Beaded SPOCC(194) resin was effectively prepared by suspension polymerization of oxetanylated TEG macromonomer 5 in stirred silicon oil. Mechanically stable and inert to a diverse range of reaction conditions, SPOCC(194) possessed a high hydroxyl group loading (0.9-1.2 mmol/g) for substrate attachment and swelled effectively ( approximately 2-4 mL/g) in a variety of organic and aqueous solvents. Developed for solid-phase synthesis at high reactant concentrations for driving organic and aqueous reactions to completion, SPOCC(194) exhibited high functional group density (mmol/mL) similar to that of low-loaded aminomethylated polystyrene-divinylbenzene copolymer (PS-1%DVB) yet significantly higher than that of PEGA(1900), SPOCC(1500), and TentaGel S. High-resolution MAS NMR spectra of Fmoc-derivatized SPOCC(194) indicate that monitoring of functional group transformation is possible. Moreover, by employment of a nonaromatic resin-linker combination, electrophilic chemistry, such as Lewis acid catalyzed glycosylation and Friedel-Crafts acylation, was selectively performed on substrate bound to SPOCC(194) resin. Such properties make SPOCC(194) resin a promising new polymer matrix for the support-bound construction of small organic molecules by parallel and combinatorial synthesis and the scavenging of solution-phase reactants or byproducts.