Two- and three-dimensional comparative study of heat transfer and pressure drop characteristics of nanofluids flow through a ventilated cubic cavity (part I: Newtonian nanofluids)

Journal of Thermal Analysis and Calorimetry - Through this paper, three-dimensional fluid flow and heat transfer of Al2O3 nanofluid within ventilated enclosures was taken into consideration....     

Application of differential electrolytic potentiometry for detection in flow injection analysis

The applicability of differential electrolytic potentiometry as a detection system in flow injection analysis is investigated. A computer-controlled injector which delivers precise volumes of sample solutions in a reproducible manner was developed. Conditions such as current density employed, the concentrations of the solutions used and the flow rate were optimized. Chloride in water was determined by means of this system. The relation between chloride concentration and the measured signal was found to be Nernstian for solutions of concentrations above 6 μg ml⁻¹ chloride. For solutions below this concentration, the relation is linear.     

Equivalences of comodule categories for coalgebras over rings

In this article we defined and studied quasi-finite comodules, the cohom functors for coalgebras over rings. Linear functors between categories of comodules are also investigated and it is proved that good enough linear functors are nothing but a cotensor functor. Our main result of this work characterizes equivalences between comodule categories generalizing the Morita-Takeuchi theory to coalgebras over rings. Morita-Takeuchi contexts in our setting is defined and investigated, a correspondence between strict Morita-Takeuchi contexts and equivalences of comodule categories over the involved coalgebras is obtained. Finally, we proved that for coalgebras over QF-rings Takeuchi's representation of the cohom functor is also valid.     

Synthesis,dynamic light scattering,and luminescence properties of copolymers containing iridium(III) bisterpyridine in the side chain

Supramolecular block‐random copolymers containing [Ir(terpy)₂]³⁺ in the side chain were synthesized via postfunctionalization of a P(S‐b‐AC_terpy) block copolymer. Absorbance and emission spectra compared to a model compound show that the polymer backbone has a minor effect on the polymer absorbance but produces a larger shift for the phosphorescence signals to higher wavelength. Dynamic light scattering of the metal complex containing copolymer studied in various solvents showed monomodal aggregation with decreasing aggregate size as the solvent dielectric constant increased. The copolymer precursor P(S‐b‐AC_terpy) shows multimodal aggregation in different solvents with the major population consisting of single chains. This difference in behavior between the two polymers is attributed to the electrolytic nature of the complex and the amphiphilicity induced by the charged metal complex. Supramolecular copolymers like these will continue to have interesting self‐organizational properties and may find applications in multicomponent systems for photoinduced charge separation processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1109–1121, 2007     

Eigenvalue Spectrum of a Dirac Particle in Static and Spherical Complex Potential

It has been observed that a quantum theory need not be Hermitian to have a real spectrum. We study the non-Hermitian relativistic quantum theories for many complex potentials, and obtain the real relativistic energy eigenvalues and corresponding eigenfunctions of a Dirac-charged particle in complex statically and spherically symmetric potentials. Complex Dirac–Eckart, complex Dirac–Rosen–Morse II, complex Dirac–Scarf and complex Dirac–Poschl–Teller potential are investigated.     

Analysis and Optimization of Noise in Bipolar RF Harmonic Mixers

A noise analysis of bipolar harmonic mixers (BHM) used for direct-conversion receivers is presented in this paper. Analytical and simulated results for the transfer function of the mixer are presented. Simple analytical expressions describing noise contribution from all sources are derived. Estimation of flicker noise quite agrees with harmonic-balance simulation results. Based on the derived expressions, total time average noise power spectral density (PSD) at the output is compared with simulation results. For the recommended regions of operation, error is less than 20%. The overall BHM noise figure (NF) is calculated and optimized based on a simple extracted formula. Errors introduced by analysis remain within a 1.5-dB margin with respect to simulation results. The validity of analysis for high frequencies is justified. The effect of flicker noise coefficient on the overall mixer NF is compared for different available processes.     

50-nm Self-Aligned and “Standard” T-gate InP pHEMT Comparison: The Influence of Parasitics on Performance at the 50-nm Node

Continued research into the development of III-V high-electron mobility transistors (HEMTs), specifically the minimization of the device gate length, has yielded the fastest performance reported for any three terminal devices to date. In addition, more recent research has begun to focus on reducing the parasitic device elements such as access resistance and gate fringing capacitance, which become crucial for short gate length device performance maximization. Adopting a self-aligned T-gate architecture is one method used to reduce parasitic device access resistance, but at the cost of increasing parasitic gate fringing capacitances. As the device gate length is then reduced, the benefits of the self-aligned gate process come into question, as at these ultrashort-gate dimensions, the magnitude of the static fringing capacitances will have a greater impact on performance. To better understand the influence of these issues on the dc and RF performance of short gate length InP pHEMTs, the authors present a comparison between In_0.7Ga_0.3As channel 50-nm self-aligned and "standard" T-gate devices. Figures of merit for these devices include transconductance greater than 1.9 S/mm, drive current in the range 1.4 A/mm, and fT up to 490 GHz. Simulation of the parasitic capacitances associated with the self-aligned gate structure then leads a discussion concerning the realistic benefits of incorporating the self-aligned gate process into a sub-50-nm HEMT system     

Heat transfer and flow induced by both natural convection and vibrations inside an open-end vertical channel

The effects of oscillatory motions that may present at a wall during vibrating conditions are studied on flow induced by natural convection and heat transfer inside an open-end vertical channel. The governing equations are non-dimensionalized and reduced to simpler forms. Analytical solutions are obtained for several limiting cases. The reduced governing equations are solved for various values of the controlling parameters. It is found that mean values of average Nusselt numbers are mainly affected by the Grashof number and the amplitude of the horizontal vibrations. Further, amplitudes of Nusselt numbers at the vibrated wall are decreased as the Grashof number increases for horizontal vibrations while they are increased as amplitudes of vibrations increase. It is also found that the squeezing/vibrational Reynolds number, Grashof number and amplitudes of vibrations have a great influence on the trends of stream lines and isotherms especially at low Grashof numbers. Finally, correlations that summarize the effects of the different controlling parameters are determined on the Nusselt numbers and their amplitudes at relatively low frequency of vibrations.     

Investigating the influence of the counter Si-cell on the optoelectronic performance of high-efficiency monolithically perovskites/silicon tandem cells under various optical sources

Nowadays, tandem structures have become a valuable competitor to conventional silicon solar cells, especially for perovskite over silicon, as metal halides surpassed Si with tunable bandgaps, high absorption coefficient, low deposition, and preparation costs. This led to a remarkable enhancement in the overall efficiency of the whole cell and its characteristics. Consequently, this expands the usage of photovoltaic technology in various fields of applications not only under conventional light source spectrum in outdoor areas, i.e., AM1.5G, but also under artificial light sources found indoors with broadband intensity values, such as Internet of things (IoTs) applications to name a few. We introduce a numerical model to analyze perovskite/Si tandem cells (PSSTCs) using both crystalline silicon (c-Si) and hydrogenated amorphous silicon (a-Si:H) experimentally validated as base cells. All proposed layers have been studied with J-V characteristics and energy band diagrams under AM1.5G by using SCAPS-1D software version 3.7.7. Thereupon, the proposed architectures were tested under various artificial lighting spectra. The proposed structures of Li4Ti5O12/CsPbCl3/MAPbBr3/CH3NH3PbI3/Si recorded a maximum power conversion efficiency (PCE) of 25.25% for c-Si and 17.02% for a-Si:H, with nearly 7% enhancement concerning the Si bare cell in both cases.     

Electronic communication through the ureylene bridge: spectroscopy, structure and electrochemistry of dimethyl 1,1-ureylenedi(1-ferrocenecarboxylate)

Dimethyl 1^′,1^′-ureylenedi(1-ferrocenecarboxylate) (1) formed during the synthesis of 1-amino, 1^′-ferrocenecarboxylic acid shows virtual molecular centrosymmetry. Electronic coupling between the two Fc groups through the ureylene bridge results in both Fc groups being individually oxidizable (ΔE_1/2?0.14 V). The possible existence of intermolecular electronic communication has discussed. The oxidation was followed by spectroelectrochemistry. The separation between the two halfwave potentials ΔE_1/2=137±5 mV and the comproportionation constant K_c=207.