Hydrogenated amorphous silicon thin-film transistor arrays fabricated by digital lithography

A jet-printed digital-lithographic method, in place of conventional photolithography, was used to fabricate 64 /spl times/ 64 pixel (300 /spl mu/m pitch) matrix addressing thin-film transistor (TFT) arrays. The average hydrogenated amorphous silicon TFT device within an array had a threshold voltage of /spl sim/3.5 V, carrier mobility of 0.7 cm/sup 2//V/spl middot/s, subthreshold slope of 0.76 V/decade, and an on/off ratio of 10/sup 8/.     

Rhodium-Catalyzed Enantioselective Radical Addition of CX4 Reagents to Olefins

We describe the synthetically useful enantioselective addition of Br−CX₃ (X=Cl or Br) to terminal olefins to introduce a trihalomethyl group and generate optically active secondary bromides. Computational and experimental evidence supports an asymmetric atom-transfer radical addition (ATRA) mechanism in which the stereodetermining step involves outer-sphere bromine abstraction from a [(bisphosphine)Rh^IIBrCl] complex by a benzylic radical intermediate. This mechanism appears unprecedented in asymmetric catalysis.     

Chemical vapor deposition synthesis of self-aligned carbon nanotube arrays

A procedure for producing arrays of self-aligned carbon nanotubes (CNTs) using standard chemical vapor deposition (CVD) is reported. Using UV photolithography, silicon substrates are patterned with a thin layer of thermally evaporated iron as a CNT catalyst. The CVD synthesis was carried out over a small temperature range (700°C–800°C) using acetylene and methane gasses, producing aligned CNT towers. Scanning electron microscopy (SEM) analysis shows a relationship between CNT tower height and synthesis time. Additionally, results show that impurity particles dramatically effect CNT tower growth. These results indicate that aligned CNTs can be produced in a desired pattern with height control.     

Enantioselective total synthesis of (-)-kibdelone C

The kibdelones are aromatic polyketide natural products featuring isoquinolinone and tetrahydroxanthone ring systems. They display potent cytotoxicity toward a range of human cancer cell lines. Here, we present an enantioselective total synthesis of kibdelone C that utilizes a Shi epoxidation to establish the absolute and relative stereochemistry, an acid-catalyzed cyclization to form the tetrahydroxanthone, and a C-H arylation to complete the hexacyclic skeleton.     

A thin film triode type carbon nanotube field emission cathode

The field electron emission of carbon nanotubes has been heavily studied over the past two decades for various applications, such as in display technologies, microwave amplifiers, and spacecraft propulsion. However, a commercializable lightweight and internally gated electron source has yet to be realized. This work presents the fabrication and testing of a novel internally gated carbon nanotube field electron emitter. Several specific methods are used to prevent electrical shorting of the gate layer, a common failure for internally gated devices. A unique design is explored where the etch pits extend into the silicon substrate and isotropic etching is used to create a lateral buffer zone between the gate and carbon nanotubes. Carbon nanotubes are self-aligned to and within 10 microns from the gate, which creates large electric fields at low potential inputs. Initial tests confirm high field emission performance with an anode current density (based on total area of the device) of 293 μA?cm^?2 and a gate current density of 1.68 mA?cm^?2 at 250 V.     

Vertically integrated amorphous silicon color sensor arrays

Large-area color sensor arrays based on vertically integrated thin-film sensors were realized. The complete color information of each color pixel is detected at the same position of the sensor array without using optical filters. Sensor arrays consist of amorphous silicon thin-film color sensors integrated on top of amorphous silicon readout transistors. The spectral sensitivity of the sensors is controlled by the applied bias voltage. The operating principle of the color sensor arrays and the influence of device design on spectral sensitivity are described. Furthermore, the image quality of the sensor arrays is analyzed by measurements of the line spread function and the modulation transfer function.     

Antimicrobial Gallium‐Doped Phosphate‐Based Glasses

Novel quaternary gallium‐doped phosphate‐based glasses (1, 3, and 5 mol % Ga₂O₃) were synthesized using a conventional melt quenching technique. The bactericidal activities of the glasses were tested against both Gram‐negative (Escherichia coli and Pseudomonas aeruginosa) and Gram‐positive (Staphylococcus aureus, methicillin‐resistant Staphylococcus aureus, and Clostridium difficile) bacteria. Results of the solubility and ion release studies showed that these glass systems are unique for controlled delivery of Ga³⁺. ⁷¹Ga NMR measurements showed that the gallium is mostly octahedrally coordinated by oxygen atoms, whilst FTIR spectroscopy provided evidence for the presence of a small proportion of tetrahedral gallium in the samples with the highest gallium content. FTIR and Raman spectra also afford an insight into the correlation between the structure and the observed dissolution behavior via an understanding of the atomic‐scale network bonding characteristics. The results confirmed that the net bactericidal effect was due to Ga³⁺, and a concentration as low as 1 mol % Ga₂O₃ was sufficient to mount a potent antibacterial effect. The dearth of new antibiotics in development makes Ga³⁺ a potentially promising new therapeutic agent for pathogenic bacteria including MRSA and C. difficile.     

Derivation of power gain for three types of three dimensional photovoltaics cells

In order to quantify the higher power output seen from solar cells with a three‐dimensional (3D) topology due to the increased interactions between photons and the cell surface, we have derived a formula for the average number of interactions, Γ, between a photon and the cell surface for 3D cells with vertical sidewalls and flat tops. We have derived Γ for three different cell morphologies, an infinite trench in the x‐ or y‐direction, an enclosed box, and an infinite two‐dimensional (2D) array of towers. Monte Carlo simulations were carried out in order to compare computational results for Γ with those derived. For varying distance between features, d, and photon azimuthal angle, the data fits the derived expressions quite well for a large range of values. For varying tower height, the data fits theory well for both the trench and box morphologies, however, theory overestimates the value of Γ for the 2D array of towers. This is due to simplifications made when deriving Γ. However, the error associated with Γ is small enough that it propagates to a measured power output error of less than 1% for cells with an absorbance efficiency of at least 25%. Even with simplifications, the derived expression for Γ should be usable for predicting the increased power output for 3D cells with vertical sidewalls and flat tops. Copyright © 2011 John Wiley & Sons, Ltd.     

The Munich Compact Light Source: initial performance measures

While large‐scale synchrotron sources provide a highly brilliant monochromatic X‐ray beam, these X‐ray sources are expensive in terms of installation and maintenance, and require large amounts of space due to the size of storage rings for GeV electrons. On the other hand, laboratory X‐ray tube sources can easily be implemented in laboratories or hospitals with comparatively little cost, but their performance features a lower brilliance and a polychromatic spectrum creates problems with beam hardening artifacts for imaging experiments. Over the last decade, compact synchrotron sources based on inverse Compton scattering have evolved as one of the most promising types of laboratory‐scale X‐ray sources: they provide a performance and brilliance that lie in between those of large‐scale synchrotron sources and X‐ray tube sources, with significantly reduced financial and spatial requirements. These sources produce X‐rays through the collision of relativistic electrons with infrared laser photons. In this study, an analysis of the performance, such as X‐ray flux, source size and spectra, of the first commercially sold compact light source, the Munich Compact Light Source, is presented.