The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

Control of LHCD on the HL-2A Tokamak

in order to study non-indutive plasma current production, the lower hybrid current drive（LHCD） experiment on the HL-2A tokamak is carried out. Simultaneously a microcomputer has been used to control the whole LHCD system. During the experiment this year, we can monitor and protect the LHCD system by use of the microcomputer control system, which will imediately switch off the microwave power to be launched into the tokamak if the plasma is disrupted. All this ensure that the microwave is injected into the equipment correctly.     

用Tow-Thomas电路设计含有限非零传输零点有源滤波器的方法

Tow-Thomas电路是一种实现全极点滤波器的典型电路。本文给出了用Tow-Thoms电路设计含有限非零传输零点有源滤波器的方法，从而使Tow-Thomas电路可用于单片集成滤波器电路。而文中给出的公式可用于计算外接元件。设计实例表明了文中给出的计算公式的正确性。     

High Voltage Pulse Power and the Technics for the Capacitor Power-Storage Type

Lower hybrid wave （LHW）, electro cyclotron （EC） and neutral beam injection （NBI） etc. are the important methods of auxiliary heating. They would be devoted to the HL-2A tokamak step by step. In order to satisfy the debug of each system and the need of the experiment, the system should be equipped with high voltage pulse power （HVPP） according to the requirement.     

Interactive key frame selection model

Video summarization can provide a fine representation of the content of video stream and reduce a large amount of data involved in video indexing, browsing, and retrieval. Moreover, Key frame selection is an important step in the research of content-based video analysis and retrieval. Although there exist a variety of methods for key frame selection, they are heuristic and closed systems, which cannot dynamically generate video summary with user’s preference. In this paper, an M-estimator and epipolar line distance constraint camera motion estimation algorithm is introduced as camera parameters is an important motion feature for key frame selection, and Broyden-Fletcher-Goldfarb-Shanno (BFGS) method is applied to optimize estimated parameters. Moreover, since Interactive Computing is a novel-computing model that represents the transition of algorithm to interaction, an interactive model of key frame selection (IKFS) is presented as a result of improving the model of key frame selection (KFS). The model of KFS and IKFS are proved to satisfy the criterion of induction and coinduction, respectively. Experimental results show that the processing scheme generates flexible and desirable summarizations whose distortion rate is lower than current method. Above all, IKFS is an extension to KFS.     

反光板(合作目标)反射率测量仪

本文介绍了反光板（合作目标）反射率测量仪的研制。仪器采用对称双光路比较测量法，给定两束相等光通量的光束，分别作为参考光束和测试光束，并用分束器实现原光路取样，从而解决了合作目标反光板入射光线与反射光线重合不能用常规测试方法来检测的难题。由于采用对称双光路的方法，入射光通量是相对恒定的，不受外界因素影响，从而使反射率测量仪达到精度高、重复性好和环境要求低的设计要求。     

毛细管电泳法快速分离和检测肠毒性大肠杆菌

 建立了快速分离和检测引起仔猪腹泻的肠毒性大肠杆菌K88、K99和 987P细菌细胞的毛细管区带电泳方法 ,并进行了腹泻仔猪粪便中肠毒性大肠杆菌的应用检测分析。结果表明 ,在电泳缓冲液为 0 0 5mol/LNa2 CO3 NaHCO3(pH 9 9)、分离电压为 1 4 1kV、检测波长为 2 1 0nm的电泳条件下 ,E coliK88、K99和 987P的细胞分别具有单一、稳定的特征谱峰 ,其保留时间的相对标准偏差RSD≤ 0 9% ;在确定的实验条件下 ,实现了腹泻仔猪粪便中肠毒性大肠杆菌的快速检测分析 ,发现将出生 5d～ 6d的腹泻仔猪粪便引入培养基中增殖后主要检出K88。     

X射线衍射仪新功能的开发及其应用

根据Ｘ射线衍射仪的结构特点,通过巧妙而简易的改装,增添了“同步照相”新功能。文中分析了开发新功能的可行性;列举了新功能在某些场合下,能使传统的照相法和现代的衍射仪法结合起来,取长补短的例子;指出新功能有助于提高分析测试水平,并可收到一机多用、节能高效的综合效果。     

煤炭码头船货匹配下泊位动态分配多目标优化模型及算法

本文针对输出型煤炭码头船货匹配下泊位动态分配问题,构建了堆场-取装线-泊位-船舶联合分配优化数学模型,并设计了采用仿真推演策略解码的遗传算法求解。首先,综合考虑船舶、泊位、堆场、取装线、煤种、航道开放时间和装船作业规则等要素,以船舶在港时间最短和作业效率最大为目标建立了相应的多约束多目标优化模型。然后,综合多目标优化、遗传算法以及仿真推演技术,设计了相应的遗传算法求解,包括:组合式编码、采用仿真推演策略的解码方法,追加了具有合法性检查的染色体生成算法,设计了采用多种策略的遗传操作等。最后实例表明,本算法的执行效率高而且优化效果好。     

Electrooxidation Mechanism of Methanol at Pt-Ru Catalyst Modified GC Electrode in Electrolytes with Different pH Using Electrochemical and SERS Techniques

The electrochemical and in-situ surface-enhanced Raman spectroscopy （SERS） techniques were used to investigate the electrooxidation behavior of methanol in acidic, neutral and alkaline media at a Pt-Ru nanoparticle modified glassy carbon （Pt-Ru/GC） electrode. The results showed that methanol could be dissociated spontaneously at the Pt-Ru/GC electrode to produce a strongly adsorbed intermediate, CO. It was found that CO could be oxidized more easily in the alkaline medium than in the acidic and neutral media. The peak potential of methanol oxidation was shifted from 0.663 and 0.708 V in the acidic and neutral media to -0.030 V in the alkaline medium, which is due to that the adsorption strength of CO on the Pt surface in the alkaline medium is weaker than that in the acidic and neutral media. The final product of the methanol oxidation is CO2. However, in the alkaline medium, CO2 produced would form CO3^2- and HCO3^- resulting in the decrease in the alkaline concentration and then in the decrease in the performance of DMFC. Therefore, the performance of the alkaline DMFC is not Stable.