Polymer nanoparticles with a sensitive CO2‐responsive hydrophilic/hydrophobic surface

Poly(methyl methacrylate) (PMMA) nanoparticles with a sensitive CO₂‐responsive hydrophilic/hydrophobic surface that confers controlled dispersion and aggregation in water were prepared by emulsion polymerization at 50 °C under CO₂ bubbling using amphiphilic diblock copolymers of 2‐dimethylaminoethyl methacrylate (DMAEMA) and N‐isopropyl acrylamide (NIPAAm) as an emulsifier. The amphiphilicity of the hydrophobic–hydrophilic diblock copolymer at 50 °C was triggered by CO₂ bubbling in water and enabled the copolymer to serve as an emulsifier. The resulting PMMA nanoparticles were spherical, approximately 100 nm in diameter and exhibited sensitive CO₂/N₂‐responsive dispersion/aggregation in water. Using copolymers with a longer PNIPAAm block length as an emulsifier resulted in smaller particles. A higher concentration of copolymer emulsifier led to particles with a stickier surface. Given its simple preparation and reversible CO₂‐triggered amphiphilic behavior, this newly developed block copolymer emulsifier offers a highly efficient route toward the fabrication of sensitive CO₂‐stimuli responsive polymeric nanoparticle dispersions. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2149–2156     

Degree-of-polarization and eye-closure penalty associated with optical signals with orthogonal polarizations

We perform a systematic measurement of the degree-of-polarization (DOP) and eye-closure penalty for optical signals with orthogonal polarizations. We find that the symmetry of DOP is maintained for the orthogonal polarizations under both first and higher order polarization-mode dispersion (PMD), whereas the symmetry of eye-closure penalty is broken under second-order PMD. An orthogonal polarization pair can have large disparity of eye-closure penalty despite an identical DOP. We also demonstrate a novel approach to estimate the maximum eye-closure penalty asymmetry with three orthogonal polarizations on the Poincare/spl acute/ sphere.     

Production,Purification and Characterization of the Hen Egg-White Lysozyme Inhibitor from Enterobacter cloacae M-1002

Three hen egg-white lysozyme inhibitor producing strains, Enterobacter cloacae M-1002, E. sakazakii M-1204, and Erwinia rhapontici H-55, were isolated from the soils of Taiwan. E. cloacae M-1002 appeared to be a promising inhibitor producing strain. One inhibitor was isolated from the culture broth of this strain. Maximum lysozyme inhibitory activity was obtained when the bacterium was grown aerobically in a medium consisting of 0.75% glucose, 0.25% beef extract, 1.0% polypeptone, and 0.25% sodium L-glutamate (pH 70) at 37 °C after 36–48 hrs. A hen egg-white lysozyme inhibitor was isolated from the culture broth of this strain. The inhibitor was purified from the culture supernatant of E. cloacae M-1002 by ammonium sulfate fractionation, DEAE-Sepharose CL-6B column chromatography and Fractogel TSK HW-55 (S) gel chromatography. Molecular weight of the purified lysozyme inhibitor was estimated to be 18, 000–20, 000 by SDS-PAGE and HPLC, and was composed of 71% amino acid and 23% total sugar. Serine, glycine, and alanine in a 3:2:1 molar ratio were the major amino acids, calculated to be 32.8, 20.3, and 11.4% (mol%), respectively. Glucose and mannose were the major sugar components of the inhibitor. The inhibitor was stable at pH 5 to 8 and was stable under 50 °C. Only hen egg-white lysozyme was inhibited by the purified inhibitor but not the other tested enzymes such as lysozyme of celery, turnip; lytic enzyme of Pseudomonas aeruginosa M-1001; chitinase/lysozyme of P. aeruginosa K-187; or cellulase and xylanase of Streptomyces actuosus A-151 and Aspergillus sp. G-393. The inhibition of lysozyme to the bacterial cell lytic activity by the purified inhibitor was 100%.     

Bayesian Prediction Analysis for Growth Curve Model Using Noninformative Priors

We apply a Bayesian approach to the problem of prediction in an unbalanced growth curve model using noninformative priors. Due to the complexity of the model, no analytic forms of the predictive densities are available. We propose both approximations and a prediction-oriented Metropolis-Hastings sampling algorithm for two types of prediction, namely the prediction of future observations for a new subject and the prediction of future values for a partially observed subject. They are illustrated and compared through real data and simulation studies. Two of the approximations compare favorably with the approximation in Fearn (1975, Biometrika, 62, 89–100) and are very comparable to the more accurate Rao-Blackwellization from Metropolis-Hastings sampling algorithm.     

Optimum Design for RF-to-Optical Up-Converter in Coherent Optical OFDM Systems

In this letter, we conduct analysis on the optimum design for RF-to-optical up-converter in coherent optical OFDM systems using an optical I/Q modulator. We first derive closed-form expressions for the nonlinearity in the optical I/Q modulator, represented by two-tone intermodulation products as a function of the bias point and modulation index. Additionally, we perform a numerical simulation to identify Q-penalty and the excess modulation insertion loss under various transmitter conditions. We find that in contrast to the direct-detected system, the optimal modulator bias point for the coherent system is pi, where the Q-penalty and excess loss are minimized     

An expedient synthesis of an isofervenulin analogue

An efficient approach has been developed for the synthesis of an isofervenulin analogue 1 employing a one‐pot condensation‐substitution reaction of a chlorocarboethoxytriazine (electrophile) with a urea (nucleophile). The resulting cyclization reaction resulted in the synthesis of a pyrimido‐heterocycle in good yield in either acidic or basic media. The former was assisted by utilizing trimethylsilyl chloride.     

VLSI architectural design tradeoffs for sliding-window log-MAP decoders

Turbo codes have received tremendous attention and have commenced their practical applications due to their excellent error-correcting capability. Investigation of efficient iterative decoder realizations is of particular interest because the underlying soft-input soft-output decoding algorithms usually lead to highly complicated implementation. This paper describes the architectural design and analysis of sliding-window (SW) Log-MAP decoders in terms of a set of predetermined parameters. The derived mathematical representations can be applied to construct a variety of VLSI architectures for different applications. Based on our development, a SW-Log-MAP decoder complying with the specification of third-generation mobile radio systems is realized to demonstrate the performance tradeoffs among latency, average decoding rate, area/computation complexity, and memory power consumption. This paper thus provides useful and general information on practical implementation of SW-Log-MAP decoders.     

Temperature‐modulated differential scanning calorimetry studies on the origin of double melting peaks in isothermally melt‐crystallized poly(L‐lactic acid)

In this work, the melting behaviors of nonisothermally and isothermally melt‐crystallized poly(L ‐lactic acid) (PLLA) from the melt were investigated with differential scanning calorimetry (DSC) and temperature‐modulated differential scanning calorimetry (TMDSC). The isothermal melt crystallizations of PLLA at a temperature in the range of 100–110 °C for 120 min or at 110 °C for a time in the range of 10–180 min appeared to exhibit double melting peaks in the DSC heating curves of 10 °C/min. TMDSC analysis revealed that the melting–recrystallization mechanism dominated the formation of the double melting peaks in PLLA samples following melt crystallizations at 110 °C for a shorter time (≤30 min) or at a lower temperature (100, 103, or 105 °C) for 120 min, whereas the double lamellar thickness model dominated the formation of the double melting peaks in those PLLA samples crystallized at a higher temperature (108 or 110 °C) for 120 min or at 110 °C for a longer time (≥45 min). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 466–474, 2007     

Monolithically integrated laser/rear-facet monitor arrays withV-groove for passive optical fiber alignment

An InGaAsP/InP laser monolithically integrated with a rear facet monitor and a fiber V-groove has been demonstrated for the first time. The integrated device incorporates an etched-facet laser fabricated using an in situ, multistep, reactive ion etch process. The integrated V-groove, which is etched directly into the InP substrate, is designed to enable passive alignment of an optical fiber to the active region of the laser. Passive coupling efficiencies of 18% and 8% have been obtained using cleaved multimode and single mode fibers, respectively. Responsivities of the rear facet monitor were as high as 0.49 A/W     

Band offsets of In0.30Ga0.70As/In0.29Al0.71As heterojunction grown on GaAs substrate

Temperature-dependent current-voltage measurement was employed to study the band offsets of the In_0.30Ga_0.70As/In _0.29Al_0.71As heterojunction. The conduction band discontinuity was determined to be 0.71±0.05 eV which corresponds to a conduction band offset to bandgap difference ratio ~0.66. The comparison between experimental and theoretical results is presented