Chromophore-Free Sealing and Repair of Soft Tissues Using Mid-Infrared Light-Activated Biosealants

Poor strength, infection, leakage, long procedure times, and inflammation limit the efficacy of common tissue sealing devices in surgeries and trauma. Light-activated sealing is attractive for tissue sealing and repair, and can be facilitated by the generation of local heat following absorption of nonionizing laser energy by chromophores. Here, the inherent ability of biomaterials is exploited to absorb nonionizing, mid-infrared (midIR) light in order to engender rapid photothermal sealing and repair of soft tissue wounds. In this approach, the biomaterial simultaneously acts as a photothermal convertor as well as a biosealant, which dispenses the need for exogeneous light-absorbing nanoparticles or dyes. Biomechanical recovery, mathematical modeling, histopathology analyses, tissue strain mapping using digital imaging correlation, and visualization of the biosealant-tissue interface using hyperspectral imaging indicate superior performance of midIR sealing in live mice compared to conventional sutures and glue. The midIR-biosealant approach demonstrates rapid sealing of soft tissues, improves cosmesis, lowers potential for scarring, obviates safety concerns because of the nonionizing light used, and allows adoption of a wide diversity of biomaterials. Taken together, the studies demonstrate a novel advance both in biomaterials for surgical sealing along with the use of nonionizing midIR light, with high potential for clinical translation.     

Thiol–norbornene materials: Approaches to develop high Tg thiol–ene polymers

The ability to prepare high T_g low shrinkage thiol–ene materials is attractive for applications such as coatings and dental restoratives. However, thiol and nonacrylated vinyl materials typically consist of a flexible backbone, limiting the utility of these polymers. Hence, it is of importance to synthesize and investigate thiol and vinyl materials of varying backbone chemistry and stiffness. Here, we investigate the effect of backbone chemistry and functionality of norbornene resins on polymerization kinetics and glass transition temperature (T_g) for several thiol–norbornene materials. Results indicate that T_gs as high as 94 °C are achievable in thiol–norbornene resins of appropriately controlled chemistry. Furthermore, both the backbone chemistry and the norbornene moiety are important factors in the development of high T_g materials. In particular, as much as a 70 °C increase in T_g was observed in a norbornene–thiol specimen when compared with a sample prepared using allyl ether monomer of analogous backbone chemistry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5686–5696, 2007     

Quantitative measurements of recombinant HIV surface glycoprotein 120 binding to several glycosphingolipids expressed in planar supported lipid bilayers

The interaction of recombinant HIV-1 surface glycoprotein gp120 (rgp120) with natural isolates of lactosylceramide (LacCer), glucosylceramide (GlcCer), and galactosylceramide (GalCer) has been quantitatively measured under equilibrium conditions using total internal reflection fluorescence (TIRF) spectroscopy. The binding affinity (K(a)) of rgp120 to these glycosphingolipids (GSLs), reconstituted at 5 mol % in supported planar lipid bilayers composed of 95 mol % POPC, is ca. 10(6) M(-1) for dissolved rgp120 concentrations greater than 25 nM. In contrast, at concentrations of rgp120 between 0.2 and 15 nM, rgp120 does not bind significantly to LacCer and GlcCer, but has a high affinity for GalCer with a measured K(a) value of 1.6 x 10(9) M(-1). However, protein surface coverage measurements show that this strong binding process accounts for very little of the total protein adsorbed over the entire concentration range studied. At a protein concentration of ca. 20 nM, the surface coverage is only 3% of that achieved at apparent saturation (i.e., when the protein concentration is ca. 220 nM). Thus the "high affinity" binding sites comprise only a small fraction of the total number of binding sites. Several other variables were investigated. Rgp120 binding behavior at membranes doped with alpha-hydroxygalactosylceramide (alpha-GalCer) was very similar to that observed with GalCer, showing that the presence/absence of an alpha-hydroxy moiety does not significantly affect galactosylceramide recognition. Phase segregation of GalCer, which occurs when the mole fraction of this GSL in a POPC bilayer exceeds ca. 0.1, was also investigated and showed no effect on binding affinity at low rgp120 concentrations. To investigate the influence of fatty acid chain length, GSLs with monodisperse C(18) and C(24) chain lengths, both with and without an alpha-hydroxy moiety, were synthesized, and their binding affinity to rgp120 was examined. Relative to the natural isolates (which contain a mixture of chain lengths), minimal differences were observed; thus among the compounds tested, fatty acid chain length does not affect GSL recognition. The results of this work should aid efforts to design anti-HIV-1 agents based on membrane-tethered, carbohydrate-based receptors for rgp120.     

Anion dependent structures of luminescent silver(i) complexes

The reaction of AgX, where X = trifluoroacetate (CF(3)CO(2)(-), tfa), nitrate (NO(3)(-)), trifluoromethanesulfonate (triflate, CF(3)SO(3)(-), OTf), hexafluorophosphate (PF(6)(-)), or perchlorate (ClO(4)(-)), with 2,2',3' '-tripyridylamine (tpa) yields five novel silver(I) complexes, which have been structurally characterized. The five complexes have the same 1:1 stoichiometry of Ag/tpa but exhibit different modes of coordination, depending upon the counterion present in the compound. Compound 1, [Ag(tpa)(tfa)](n)(), forms a 1D coordination polymer of [Ag(tpa)(tfa)](2) dimer units linked through bridging tfa counterions. Compound 2, [Ag(tpa)(CH(3)CN)(NO(3))](n), forms a zigzag chain 1D coordination polymer exclusively through Ag-N bonds. In compounds 1 and 2, each tpa ligand is bound to two Ag(I) ions via a 2-py and a 3-py group. Compound 3, [Ag(tpa)(OTf)](n), forms a ribbonlike 1D coordination polymer, in which each tpa ligand binds to three different silver centers via all three pyridyl groups, and the counterion remains coordinated to the Ag(I) center. Compounds 4, [Ag(tpa)(CH(3)CN)](n)(PF(6))(n), and 5, [Ag(tpa)(CH(3)CN)](n)() (ClO(4))(n), display ribbonlike structures resembling that of 3, except that the counterions are not coordinated. All complexes are luminescent in acetonitrile solution, with emission maxima in the near-UV region (lambda(max) = 366, 368, 367, 367, and 368 nm for 1-5, respectively). At 77 K, the emission maxima are red-shifted to lambda(max) = 452, 453, 450, 450, and 454 nm for 1-5, respectively.     

Structurally Tunable 3‐Cyanoformazanate Boron Difluoride Dyes

The straightforward synthesis of a series of 3‐cyanoformazanate boron difluoride dyes is reported. Phenyl, 4‐methoxyphenyl and 4‐cyanophenyl N‐substituted derivatives were isolated and characterized by single‐crystal X‐ray crystallography, cyclic voltammetry, and UV/Vis spectroscopy. The compounds were demonstrated to possess tunable, substituent‐dependent absorption, emission, and electrochemical properties, which were rationalized through electronic structure calculations.     

Highly charged ions in a new era of high resolution X-ray astrophysics

X-ray astronomy and ground-based atomic physics have a long history of fruitful collaboration: Sound understanding of the underlying atomic physics is the key to reliable interpretation of the spectra from celestial sources; conversely, astronomical spectra have been used to benchmark and advance atomic physics. This interplay is about to become even more important as we enter a new era of high-resolution X-ray astrophysics with large effective collection area. Although high-resolution observations with the gratings on the Chandra and XMM-Newton observatories continue to drive new science, upcoming planned and proposed missions will open up new discovery space in the near future that is currently challenging to access: high-resolution spectroscopy on extended sources, in the Fe K band, and on short time scales. This review summarizes open questions in these areas and the design parameters for the Hitomi, XRISM, Athena, and Arcus observatories. The expected high quality of spectra taken with these observatories puts new constraints on the accuracy of atomic reference data required to take full advantage of the diagnostic potential of these spectra.     

Decision support system for mass dispensing of medications for infectious disease outbreaks and bioterrorist attacks

A simulation and decision support system, RealOpt^©, for planning large-scale emergency dispensing clinics to respond to biological threats and infectious disease outbreaks is described. The system allows public health administrators to investigate clinic design and staffing scenarios quickly. RealOpt^© incorporates efficient optimization technology seamlessly interfaced with a simulation module. The system's correctness and computational advantage are validated via comparisons against simulation runs of the same model developed on a commercial system. Simulation studies to explore facility layout and staffing scenarios for smallpox vaccination and for an actual anthrax-treatment dispensing exercise and post event analysis are presented. The system produces results consistent with the model built on the commercial system, but requires only a fraction of the computational time. Each smallpox scenario runs within 1 CPU minute on RealOpt^©, versus run times of over 5–10 h on the commercial system. The system's fast computational time enables its use in large-scale studies, in particular an anthrax response planning exercise involving a county with 864,000 households. The computational effort required for this exercise was roughly 30 min for all scenarios considered, demonstrating that RealOpt^© offers a very promising avenue for pursuing a comprehensive investigation involving a more diverse set of scenarios, and justifying work towards development of a robust system that can be widely deployed for use by state, local, and tribal health practitioners. Using our staff allocation and assignments for the Anthrax field exercise, DeKalb county achieved the highest throughput among all counties that simultaneously conducted the same scale of Anthrax exercise at various locations, with labor usage at or below the other counties. Indeed, DeKalb exceeded the targeted number of households, and it processed 50% more individuals compared to the second place county. None of the other counties achieved the targeted number of households. The external evaluators commented that DeKalb produced the most efficient floor plan (with no path crossing), the most cost-effective dispensing (lowest labor/throughput value), and the smoothest operations (shortest average wait time, average queue length, equalized utilization rate). The study proves that even without historical data, using our system one can plan ahead and be able to wisely estimate the required labor resources. The exercise also revealed many areas that need attention during the operations planning and design of dispensing centers. The type of disaster being confronted (e.g., biological attack, infectious disease outbreak, or a natural disaster) also dictates different design considerations with respect to the dispensing clinic, facility locations, dispensing and backup strategies, and level of security protection. Depending on the situation, backup plans will be different, and the level of security and military personnel, as well as the number of healthcare workers required, will vary. In summary, the study shows that a real-time decision support system is viable through careful design of a stand-alone simulator coupled with powerful tailor-designed optimization solvers. The flexibility of performing empirical tests quickly means the system is amenable for use in training and preparation, and for strategic planning before and during an emergency situation. The system facilitates analysis of “what-if'' scenarios, and serves as an invaluable tool for operational planning and dynamic on-the-fly reconfigurations of large-scale emergency dispensing clinics. It also allows for “virtual field exercises” to be performed on the decision support system, offering insight into operations flow and bottlenecks when mass dispensing is required for a region with a large population. The system, designed in modular form with a flexible implementation, enables future expansion and modification regarding emergency center design with respect to treatment for different biological threats or disease outbreaks. Working with emergency response departments, further fine-tuning and development of the system will be made to address different biological attacks and infectious disease outbreaks, and to ensure its practicality and usability.     

Efficient synthesis of a C-analogue of the immunogenic bacterial glycolipid BbGL2

Synthesis of a C-analogue of bacterial glycolipid BbGL2 is reported using Grignard reaction of in situ generated beta-galactosyl iodide and subsequent olefin cross metathesis reaction of C-vinyl galactoside as key steps. [reaction: see text]     

Fabrication of polymer microsphere particle standards containing trace explosives using an oil/water emulsion solvent extraction piezoelectric printing process

We present a methodology for fabricating polymer microspheres using inkjet printing of a biodegradable polymer containing either high explosives or high explosive simulant. Poly(dl-lactide/glycolide) 85:15 (PLGA) microsphere production is based on an oil/water emulsion solvent extraction process. The inkjet printing process allows for precise control of the microsphere diameter and the chemical composition. The microspheres can be used as calibrants or verification standards for explosives trace detection instruments. Gas chromatography/mass spectrometry analysis demonstrated that the composition of the microspheres was consistent with predicted concentrations based on the amount of analyte incorporated into the polymer solution and the inkjet operating parameters. We have demonstrated that the microspheres can be fabricated with a mass fraction of 70% of an analyte compound.     

A general chemical synthesis platform for crosslinking multivalent single chain variable fragments

Multivalent single chain variable fragments (scFv) show increased affinity to tumor-associated antigens compared to monovalent scFv and intact monoclonal antibodies (mAb). Multivalent constructs can be derived from self-associating or covalent scFv with covalent constructs offering improved in vivo and in vitro stability. Covalent attachment of scFv can be achieved using genetically engineered expression vectors that afford scFv with site specific cysteine functionality. Expression vectors for di-scFv-C wherein the cysteine is located in the center of two scFv have also been developed for attaching chemically reactive linkers. In the example illustrated here, the di-scFv-C is derived from a mAb directed against the MUC1 epitope, which is presented on cancer cells. To achieve multivalency, a chemical crosslinking strategy utilizing various azide and multi-alkyne functionalized polyethylene glycol (PEG) linkers was implemented. Conjugation was achieved by attachment of these linkers to the scFv thiol functionality. Chemoselective ligation was employed to covalently link different protein conjugates via copper(I) catalyzed azide alkyne 1,3-dipolar cycloaddition reaction (CuAAC) chemistry. Ligations were achieved in >70% yield using a specific set of linkers as determined by SDS-PAGE and densitometry. ELISA showed increased tumor binding of a tetravalent scFv providing a versatile chemical crosslinking strategy for construction of multivalent and bi-specific immunoconjugates that retain biological activity and have potential application in pre-targeted radioimmunotherapy and imaging.