Polyamide Layer Chromatography. VIII. Preparation of Polyamide Layer on Poly(ethylene terephthalate) Film and its Application to Aromatic Nitro Compounds

Poly(ethylene terephthalate) film was used as supporter for preparation of polyamide layer. The most convenient method of preparation was described. This layer can be cut into any size and its sensitivity is higher than the glass plate supported layer. Twenty aromatic nitro compounds were used to show the behavior of polyester film based polyamide layer.     

Application of the photoionization detector for the determination of ethanol in aqueous solutions and human breath

A determination of ethanol is described, which is based on a purging system in conjunction with a photoionization detector. With that system a fast and reliable determination of ethanol in aqueous solutions is possible. The system has been used for the analysis of wine. The 3delta-detection limit has been 0.005% ethanol, the relative standard deviation 4.8 to 6.0% and the time constant of the entire analytical system 20 s. The photoionization detector has been also applied to the analysis of artificial and genuine human breath. A comparison with gas-chromatography and non-dispersive IR-detection has been proven the reliability of results.     

Determination of total fluoride in HF/HNO3/H2SiF6 etch solutions by new potentiometric titration methods

In the photovoltaic industry the etching of silicon in HF/HNO₃ solutions is a decisive process for cleaning wafer surfaces or to produce certain surface morphologies like polishing or texturization. With regard to cost efficiency, a maximal utilisation of etch baths in combination with highest quality and accuracy is strived. To provide an etch bath control realised by a replenishment with concentrated acids the main constituents of these HF/HNO₃ etch solutions including the reaction product H₂SiF₆ have to be analysed. Two new methods for the determination of the total fluoride content in an acidic etch solution based on the precipitation titration with La(NO₃)₃ are presented within this paper. The first method bases on the proper choice of the reaction conditions, since free fluoride ions have to be liberated from HF and H₂SiF₆ at the same time to be detected by a fluoride ion-selective electrode (F-ISE). Therefore, the sample is adjusted to a pH of 8 for total cleavage of the SiF₆²⁻ anion and titrated in absence of buffers. In a second method, the titration with La(NO₃)₃ is followed by a change of the pH-value using a HF resistant glass-electrode. Both methods provide consistent values, whereas the analysis is fast and accurate, and thus, applicable for industrial process control.     

Oligothiophene isocyanides for platinum-based molecular electronic applications

Understanding molecular orientation on a metal surface is key to designing molecular electronic device junctions. Though platinum device electrodes are of particular interest as a more stable alternative to the often used gold electrodes, the chemisorption of conducting molecules onto platinum surfaces has not been thoroughly studied. We present herein the first detailed study of the ability and manner in which soluble oligothiophene isocyanides, of lengths ranging from 2 to 7 nm, chemisorb onto platinum surfaces and nanoparticles. It was found that these oligothiophene isocyanides stand at a 41 degrees angle from the platinum surface normal, suggesting their applicability in molecule-bridged platinum electrode devices.     

Preferred dimerization of tetra-tolyl- and tetra-tosylurea derivatives of flexible and rigidified calix[4]arenes

The dimerization of tetratolyl- and tetratosyl-urea derivatives 1 and 2, derived from a tetrapentoxy calix[4]arene in the cone conformation and of the corresponding tetra-urea derivatives 3 and 4, in which the cone conformation is rigidified by the two crown-3 tethers, have been studied. All six possible equimolar mixtures were examined by 1H NMR using CDCl3 and CD2Cl2 as solvents. While no heterodimers are found for the combinations 1/3 and 2/4 in either solvent, all remaining combinations lead to the (exclusive) formation of heterodimers in CD2Cl2. In CDCl3 heterodimers are only observed for the combinations of 3 with 2 or 4. These results are discussed in terms of entropic and enthalpic contributions and compared with MD-simulations in a box of chloroform solvent molecules.     

3D Printing Thermally Stable High-Performance Polymers Based on a Dual Curing Mechanism

High-performance polymers are an important class of materials that are used in challenging conditions, such as in aerospace applications. Until now, 3D printing based on stereolithography processes can not be performed due to a lack of suitable materials. There is report on new materials and printing compositions that enable 3D printing of objects having extremely high thermal resistance, with Tg of 283 °C and excellent mechanical properties. The printing is performed by a low-cost Digital Light Processing printer, and the formulation is based on a dual-cure mechanism, photo, and thermal process. The main components are a molecule that has both epoxy and acrylate groups, alkylated melamine that enables a high degree of crosslinking, and a soluble precursor of silica. The resulting objects are made of hybrid materials, in which the silicon is present in the polymeric backbone and partly as silica enforcement particles.     

Application of the photoionization detector for the determination of ethanol in aqueous solutions and human breath

A determination of ethanol is described, which is based on a purging system in conjunction with a photoionization detector. With that system a fast and reliable determination of ethanol in aqueous solutions is possible. The system has been used for the analysis of wine. The 3-detection limit has been 0.005% ethanol, the relative standard deviation 4.8 to 6.0% and the time constant of the entire analytical system 20 s. The photoionization detector has been also applied to the analysis of artificial and genuine human breath. A comparison with gas-chromatography and non-dispersive IR-detection has been proven the reliability of results.     

Luminescent properties of PP and LDPE films and rods doped with the Eu(III)‐La(III) complex

The work is devoted to luminescent properties of trivalent lanthanide complexes dispersed in thermoplastic host matrices. Polyethylene films and polypropylene‐rods, both doped with these complexes, were manufactured using an extrusion technique. Two kinds of dopants were used: Eu(III)‐thenoyltrifluoroacetone‐1,10‐phenanthroline complex (1) and Eu(III)‐La(III)‐1,10‐phenanthroline complex (2). Absorption, excitation, emission spectra and lifetime of luminescence were studied. The impact of the polymer matrix on the emission spectra was investigated. Emission spectra of the films were studied at room and helium temperatures. Time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) surface mapping showed that in the Eu(III)‐La(III) complex europium forms islands (clusters) with a dimension of 1 µm, whereas lanthanum was dispersed more uniformly in the polymer matrix. Dependence of emission intensity on the excitation was determined. Copyright © 2006 John Wiley & Sons, Ltd.     

Analysis of multiple pesticide residues in tobacco using pressurized liquid extraction, automated solid-phase extraction clean-up and gas chromatography-tandem mass spectrometry

A new method was developed for the analysis of pesticide residues in tobacco. The objective was to significantly increase the number of samples that can be processed by the laboratory and to enable the extension of the current coverage to additional pesticides. A new analytical approach was therefore defined based on two main axes, the automation of the sample preparation and the selectivity of the analyte detection using tandem mass spectrometry. This latter aspect reduces the stringency of the requirements placed on the clean-up of the extracts and on the chromatographic resolution when less selective detectors are used. The extraction of the analytes from the matrix is performed using the pressurized liquid extraction technique. Tobacco samples are extracted at elevated temperature and pressure (100 C and 100 atm; 1 atm = 101,325 Pa) using acetone as an extraction solvent. The resulting extract is then concentrated using a Vortex evaporator. Three different solid-phase extraction (SPE) procedures, adjusted to the chemical properties of the different active ingredients to be measured, are applied to the concentrated extract, thus leading to three extract fractions. The first fraction contains such main classes of active ingredients as organohalogenated and 2,6-dinitroaniline compounds while the second one collects the organophosphorus and acylalanines residues; these two fractions are analyzed by capillary gas chromatography coupled to tandem mass spectrometry using negative chemical ionization and electron impact ionization in the positive mode, respectively. The third extract fraction gathers the N-methylcarbamates residues which are analyzed by HPLC with post-column derivatization and fluorescence detection. The different sample preparation stages from extraction to SPE clean-up have been automated through the use of recent analytical technologies. In combination with the analysis by tandem mass spectrometry, this provided a potential for a high sample throughput.