On translation lengths of Anosov maps on the curve graph of the torus

Geometriae Dedicata - We show that an Anosov map has a geodesic axis on the curve graph of the torus. The direct corollary of our result is the stable translation length of an Anosov map on the...     

Enhanced thermal stability of a sputtered titanium-nitride film as a diffusion barrier for capacitor-bottom electrodes

The effect of a thin RuO_x layer formed on the Ru/TiN/doped poly-Si/Si stack structure was compared with that on the RuO_x/TiN/doped poly-Si/Si stack structure over the post-deposition annealing temperature ranges of 450–600°C. The Ru/TiN/poly-Si/Si contact system exhibited linear behavior at forward bias with a small increase in the total resistance up to 600°C. The RuO_x/TiN/poly-Si/Si contact system exhibited nonlinear characteristics under forward bias at 450°C, which is attributed to no formation of a thin RuO_x layer at the RuO_x surface and porous-amorphous microstructure. In the former case, the addition of oxygen at the surface layer of the Ru film by pre-annealing leads to the formation of a thin RuO_x layer and chemically strong Ru-O bonds. This results from the retardation of oxygen diffusion caused by the discontinuity of diffusion paths. In particular, the RuO_x layer in a nonstoichiometric state is changed to the RuO₂-crystalline phase in a stoichiometric state after post-deposition annealing; this phase can act as an oxygen-capture layer. Therefore, it appears that the electrical properties of the Ru/TiN/poly-Si/Si contact system are better than those of the RuO_x/TiN/poly-Si/Si contact system.     

Broadband Light Source for Wavelength-Division Multiple Access Passive Optical Network

We demonstrated a unified two-band broadband light source based on erbium-doped fiber. The proposed scheme generates high output power at both bands and saves doped-fiber and pump lasers.     

A WDM-PON Employing Fabry–PÉrot Laser Diodes Without a Seed Light Injection

We propose and demonstrate a wavelength-division-multiplexed passive optical network by employing double-contact Fabry-Perot laser diodes (F-P LDs) without a seed light injection. To avoid the high mode partition noise at low frequency, we use a binary phase-shift keying as a modulation format at a low relative intensity noise window. An error-free transmission is achieved by compensating a lasing envelope shift due to temperature variation with the double-contact F-P LD.     

Preparation of Fe–Si–B–Nb amorphous powder cores with excellent high-frequency magnetic properties

FeSiBNb amorphous powder cores were prepared with the amorphous powder by gas atomization and subsequent hot pressing of resulting powder after creating oxide layers on the amorphous powder. Fully amorphous FeSiBNb powders with good soft magnetic properties were successfully obtained in the particle size range below 100 μm. FeSiBNb amorphous powder cores exhibit stable permeability up to 10 MHz, showing excellent high-frequency characteristics.     

Studies on mass production of transformed Panax ginseng hairy roots in bioreactor

The growth properties of Panax ginseng hairy roots transformed by Agrobacterium rhizogenes were compared between flask and aerated column or stirred bioreactor. In flask cultures, sucrose, initially 30 g/L, was nearly exhausted after 45 d of culture. The pH of the medium dropped from 5.5 to 4.96 after 10 d, but afterward it gradually increased to 6.4. After 45 d, hairy roots grew about 16-folds. The growth rate of hairy roots in air-bubble column or stirred bioreactor cultures was 1.13 (1.11) to 1.23 (1.20) g fresh wt (dry wt)/(g of cells·d), respectively. For both bioreactors, growth was about three times as high as in the flask cultivation.     

A facile approach to a d4 RuN: moiety

Replacement of chloride in (PNP)RuCl, PNP = (tBu2PCH2SiMe2)2N, by Me3SiN3 gives a pre-redox adduct that, already at -30 degrees C, releases N2 to produce the mononuclear nonplanar Ru(IV) nitride (PNP)RuN, characterized by spectroscopic and X-ray methods. DFT calculations show the planar structure to be only 1.6 kcal/mol less stable, which explains the time-averaged simplicity of the 1H NMR spectrum, as well as the large vibrational amplitude of the nitride ligand.     

Diastereoselective intermolecular rhodium-catalyzed [4 + 2 + 2] carbocyclization reactions: computational and experimental evidence for the intermediacy of an alternative metallacycle intermediate

Intermolecular rhodium-catalyzed [m + n + o] reactions of 1,6-enynes and various pi-components (carbon monoxide, alkynes, 1,3-butadienes, etc.) provide an expeditious approach for the construction of polycyclic fragments that represent important synthons for target-directed synthesis. We present computational and experimental evidence for the existence of a previously undescribed reaction pathway for the rhodium-catalyzed [4 + 2 + 2] reaction involving a 1,6-enyne. This model clearly demonstrates the origin of the excellent diastereoselectivity in this type of reaction and the remarkable tolerance of both (E)- and (Z)-isomers within the 1,6-enyne, which is generally prone to competitive ene-cycloisomerization.     

Indium-mediated one-pot reductive conversion of nitroarenes to N-arylacetamides

N-Arylacetamides were prepared in excellent yields from nitroarenes in the presence of acetic anhydride, acetic acid and indium by a one-pot procedure.     

Sorption of U(VI) onto granite surfaces: A kinetic approach

Surface sorption experiments of U(VI) onto the surfaces of a Korean granite rock are carried out in order to investigate the kinetics and reversibility of U(VI) sorption as a function of pH and surface types such as fresh intact surfaces and natural fracture surfaces. It was shown that the effect of pH is significant in the sorption of U(VI) onto both types of the granite surfaces. However the sorption rates do not greatly depend upon the pH regardless of the surface types. A two-step first order kinetic behavior dominates onto both the intact surfaces and natural fracture surfaces of granite and that the linearization approach of the kinetic model agrees well with experimental sorption data. The desorption results showed that the sorption process of U(VI) was a little irreversible for the two types of granite surfaces regardless of pH and surface types. This kinetic approach could give a better understanding of U(VI) sorption onto granite surfaces depending on pH and surface types. This revised version was published online in July 2006 with corrections to the Cover Date.