Determination of the liquidus lines and isotherms of the Hg-Zn-Te system by a modified direct observation method

The modified direct observation method is employed for the determination of the liquidus lines in the (Hg_{1_x}Zn_x)_{1_y}Te_y, ternary system. The liquidus temperatures of the ternary samples of various compositions withx from 0.05 to 0.30 andy from 0.5 to 0.9 are measured. The temperature-composition phase diagrams and some liquidus isotherms are established for this system.     

Bulk growth of Hg0.8Cd0.2Te single crystals by a combined CVT-seeding technique

The growth of high quality Hg_0.8Cd_0.2Te bulk single crystals by CVT, combined with an in-situ seeding technique, is reported here for the first time. For this purpose, a temperature difference of 590° → 540° C with a gradient of 40°-50° C/cm at the solid-vapor interface, and about 0.1 atm of HgI₂ as a transport agent, were employed. The bulk crystals have the expected stoichiometry and compositional homogeneity. Etch pit densities of 10⁴-10⁵ cm⁻² on the (111) face and hitherto unreported etch pits on the (100) face were observed in this work. Possible origins of the sub-grain structure are discussed.     

CZE separations of basic proteins at low pH in fused silica capillaries with surfaces modified by silane derivatization and/or adsorption of polar polymers

Mixtures of several basic proteins have been used to test CZE capillaries with surfaces modified by new pretreatment procedures; the performance obtained has been compared with that achieved using capillaries treated by procedures described in the literature. It has been shown that addition of non-ionic polyvinylalcohols (PVA) to CZE buffer solutions deactivates even bare, i.e. untreated, fused silica surfaces and renders them suitable for separations of basic proteins. The performance obtained from such surfaces was comparable with that of capillaries modified by the more elaborate procedures of etching, silanol derivatization, and/or adsorptive coating (again with polymers). A home-made device is described which enables derivatization and coating reactions to be performed on fused silica capillaries under an inert atmosphere, i.e. one free from oxygen and water.     

The dipole moment, polarizabilities, and first hyperpolarizabilities of HArF. A computational and comparative study

The electronic and vibrational contributions to the dipole moment, polarizabilities, and first hyperpolarizabilities of HArF are reported. These have been computed by using a series of systematically built basis sets and a hierarchy of computational methods. HArF has a very large first hyperpolarizability along the z axis. This has been rationalized by invoking the difference in the electronic structure between the ground and the first excited state. The argon fluorohydride has been recently derived and characterized. The present study provides complementary data for the understanding of the electronic structure of this interesting argon derivative.     

Röntgenstrahlenbeugung bei hohen Temperaturen zur Untersuchung der thermischen Ausdehnung von MnSe und MnSe2

Zusammenfassung Durch Röntgenstrahlenbeugung mit Hilfe einer 190 mm Unicam-Hochtemperaturkamera wurde die thermische Ausdehnung von MnSe und MnSe₂ von Zimmertemperatur bis 710° bzw. 522° C untersucht. Der thermische Ausdehnungskoeffizient wurde aus den Meßdaten nach der Methode der kleinsten Fehlerquadrate erhalten und beträgt für MnSe: =24,5·10^–6°C^–1 (94–450° C) und =14,3·10^–6°C^–1 (450–710° C). Die Ausdehnung von MnSe₂ verläuft bis zum Bereich, in dem Zersetzung eintritt, linear. Die Methode der kleinsten Fehlerquadrate ergibt den Wert =20,0·10^–6°C^–1 (73–522° C).

---

High temperature X-ray studies of the thermal expansion ofMnSe andMnSe ₂

The thermal expansion of MnSe and MnSe₂ has been studied above room temperature up to 710° and 522° C, resp., by X-ray diffraction techniques using a 190 mm Unicam high temperature camera. The thermal expansion coefficients, , obtained from a linear least-squares analysis of the data are for MnSe: =24.5·10^–6°C^–1 (94–450° C) and =14.3·10^–6°C^–1 (450–710° C). The expansion of MnSe₂ is linear up to the temperature range of decomposition. A least-squares analysis yields a value for of 20.0·10^–6°C^–1 (73–522° C).

---

---

Mit 2 Abbildungen

---

Herrn Prof.H. Nowotny gewidmet.     

Purification and analysis of partially alkylated cyclodextrins by liquid and gas chromatography

Complex mixtures of partially alkylated cyclodextrins can be analyzed by both HPLC and high temperature capillary GC. Because of the limited efficiency of LC, suitable analytical and preparative separations can be achieved only with systems of carefully optimized selectivity. Using LC it has been possible to isolate and purify single cyclodextrin species from very complex mixtures of components which contain unreacted hydroxyl groups in addition to the alkoxy groups. Analysis of the reaction mixtures and of fractions taken from LC separations can be performed with advantage by high resolution capillary GC at high temperatures between 300 and 400 °C. The thermal stability of partially alkylated cyclodextrins in high temperature GC is considerably increased by trimethylsilylation of the free hydroxyl groups. Fast atom bombardment mass spectrometry and proton NMR were used to identify species isolated from the preparative LC separations.     

Thermochemical Properties and Vapor Growth of Hg1-xCdx Te on CdTe

Based on a thermodynamic analysis, the vapor phase of the Hg_1-xCd_xTe—HgI₂—CdTe epitaxy system consists predominantly of Hg(g) and HgI₂(g) through which nutrient species migrate from the source to the CdTe substrate. Growth experiments in the 590° → 535°C temperature gradient showed that Hg_1-xCd_xTe layers can be grown on CdTe substrates using a preannealed, ternary source material in the presence of HgI₂.     

The temperature-composition phase diagram of the HgTe?HgI2 pseudobinary system on the HgTe rich side

The temperature-composition phase diagram of the HgTe? HgI₂ system was determined from 0 to 45 Mol-% HgI₂ between 25 and 670°C using Debye-Scherrer powder X-ray diffraction techniques and differential thermal analysis. Solid solutions of HgTe and HgI₂ with the cubic, zinc blende-type structure exist above 300°C, having a maximum solubility of 11.7 ± 0.8 Mol-% HgI₂ in HgTe at 501 ± 5°C. The known monoclinic compound Hg₃Te₂I₂ is formed by a peritectic reaction upon cooling at 501 ± 5°C, with the peritectic point at approximately 37 ± 4 Mol-% HgI₂.     

Preparation,purification, and analysis of alkylated cyclodextrins

Methods of alkylation of α-, β- and γ-cyclodextrins have been optimized with regard to the parameters of reaction, degree of alkylation and yields. The analysis of the reaction mixtures and of the isolated single species has been performed by high temperature GC and HPLC. The phase systems of the preferably applied HPLC have been carefully adjusted by variation of both the stationary and mobile phases to the very different hydrophobicities of the various alkylated CD species which have been synthesized. Several partially or fully alkylated CD species were isolated from preparative scale HPLC separations in high purity.     

Equilibrium sublimation and thermodynamic properties of SnS

Knudsen effusion studies of the sublimation of polycrystalline SnS, prepared by annealing and chemical vapor transport, have been performed employing vacuum micro-balance techniques in the temperature range 733–944 K and at pressures ranging from about 6 × 10^?3 to 11 Pa.The third-law heats of sublimation and second-law entropy of reaction SnS(s) = SnS(g) were determined to be ΔH⁰₂₉₈ = 220.4 ± 3.0 kJ mole^? and ΔS⁰₂₉₈ = 162.4 ± 4.5 J K^?1 mole^?1. From these data the standard heat of formation and absolute entropy of SnS(s) were calculated to be ?102.9 ± 4.0 kJ mole^?1 and 79.9 ± 6.0 J K^?1, respectively.