A Novel UWB Pulse Shape Modulation System

In this paper novel modified Hermite polynomial functions for use in impulse radio (ultra-wideband) communications are proposed. With these functions pulse shapes which are orthogonal and have nearly constant pulse width regardless of the pulse order are generated. These properties hold under the effects of differentiation. An M-ary communication system is constructed using these pulse shapes. A Matlab model for generating the pulses is designed and the effect of timing jitter on the performance of the system is investigated by computer simulation.     

A Study of Shadowing on Indoor Visible-Light Wireless Communication Utilizing Plural White LED Lightings

White LED is considered as a strong candidate for the future lighting technology. We have proposed an optical wireless communication system that employs white LEDs for indoor wireless networks. In this system, LED is used not only as a lighting device, but also as a communication device. The transmitter has large optical power and large emission characteristics to function as lighting device. And the system has specific wireless channel impulse response differing from infrared wireless communication. In this paper, we discuss about shadowing effect on the system utilizing plural LED lightings including the performance of ISI based on the impulse response. We consider the downlink transmission based on TDMA and evaluate the shadowing effect caused by pedestrians with computer simulation. When the shadowing often occurs at 800 Mb/s, the performance of outage call duration rate and blocking rate are improved by using 3 LED lightings compared with 1 or 2 LED lightings. And, we show that the system with the optimal number of the LED lighting is robust against shadowing and can accommodate more calls. Toshihiko Komine was born in Shizuoka, Japan, on November 17, 1978. He received the B.E. and M.E. degrees in Information and Computer Science from Keio University, Yokohama, Japan, in 2001 and 2003 respectively. He is currently studying for the Ph.D. degree at Department of Information and Computer Science, Keio University. His current research interests are optical wireless communications and LED communications. Shinichiro Haruyama is a professor at Department of Information and Computer Science, Faculty of Science and Technology, Keio University, Yokohama, Japan. He received an M.S. in engineering science from University of California at Berkeley in 1983 and a Ph.D. in computer science from the University of Texas at Austin in 1990. He worked for Bell Laboratories of AT{&}T and Lucent Technologies, U.S.A from 1991 to 1996, and for Sony Computer Science Laboratories, Inc. from 1998 to 2002. His research interests include reconfigurable system, system design automation, wireless communication, and visible light communication. Masao Nakagawa was born in Tokyo, Japan in 1946. He received the B.E., M.E. and Ph.D. degrees in electrical engineering from Keio University, Yokohama, Japan, in 1969, 1971 and 1974 respectively. Since 1973, he has been with the Department of Electrical Engineering, Keio University, where he is now a Professor. His research interests are in CDMA, consumer Communications, Mobile communications, ITS (Intelligent Transport Systems), Wireless Home Networks, and Visible light Communication. He received 1989 IEEE Consumer Electronics Society Paper Award, 1999-Fall Best Paper Award in IEEE VTC, IEICE Achievement Award in 2000, IEICE Fellow Award in 2001. He was the executive committee chairman on International Symposium on Spread Spectrum Techniques and Applications in 1992 and the technical program committee chairman of ISITA (International Symposium on Spread Spectrum Techniques and Applications) in 1994. He is an editor of Wireless Personal Communications and was a guest editor of the special issues on “CDMA Networks I, II, III and IV” published in IEEE JSAC in 1994 (I and II) and 1996 (III and IV). He chairs the Wireless Home Link sub-committee in MMAC (Multimedia Mobile Access Communication Promotion Committee).     

Effect of cationic surfactant on the formation of ferron complexes

In the spectrophotometric determination of aluminium and iron with ferron (7-iodo-8-quinolinol-5-sulphonic acid, H(2)L), the addition of cationic surfactants greatly improves the linearity of the calibration curve and widens the useful pH range. The effect of cetyltrimethylammonium chloride (CTMAC) on the stepwise stability constants (K(1),K(2) and K(3)) of the ferron complexes of aluminium and iron (ML(+), ML(-)(2) and ML(3-)(3)) and on the acid-dissociation constants (K(a1) and K(a2)) of ferron has been studied in connection with the role of the surfactant. CTMAC greatly increases the value of K(3) while exerting little effect on K(1) and K(2), thus rendering ML(3-)(3) the predominant species even at very low concentration of free L(2-). It also has some effect on the acid-dissociation constants of ferron, but sometimes it acts to decrease the free L(2-) concentration. At is therefore concluded that the improvements due to addition of surfactant should be attributed to the increased K(3) value. The presence of surfactant micelles is not essential, because the surfactant has a favourable effect when present at well below its critical micelle concentration, and because the continuous variations plots show a peak at a point corresponding to the composition M: L: Q (Q = cationic surfactant) = 1:3:3.     

The effect of a cystamine derivative, bis[2-(E-2-hexenoylamino)ethyl] disulfide, on rat platelet aggregation

Bis[2-(E-2-alkenoylamino)ethyl] disulfides (compds. I), synthesized from cystamine and 2-trans fatty acids, inhibited collagen-induced rat and rabbit platelet aggregation. The most potent compound was bis[2-(E-2-hexenoylamino)ethyl] disulfide (compd. I-1), and this compound suppressed thromboxane B2 formation from arachidonic acid in rat platelets. The results suggested that compd. I-1 has an inhibitory effect on cyclooxygenase.     

Engineered synapse model cell: genetic construction and chemical evaluation for reproducible high-throughput analysis

Bioassay models of neural functions must lend themselves to high-throughput analysis in neural drug discovery. However, smart analysis methods for these functions have not yet been fully established. Here, we describe the development of a synapse model for cell-based biosensing. The engineered synapse model cell expresses ionotropic glutamate receptor on its surface, like the neural postsynaptic membrane. The advantages of the model cell are the ease of handling and reproducibility as compared with the cultured neural cell, and it can be employed to evaluate receptor function through ion flux analysis. The agonist-induced sodium influx was monitored as an agonist concentration-dependent increase in the observed fluorescence signal. Furthermore, we found that our model cell enables the correction of uneven cellular signal levels using a reporter system. Our engineered synapse model cell can be employed as a powerful tool for the screening of lead substances in pharmaceutical high-throughput analysis.     

Ordered nano-structure of a stamped self-organized protein layer on a HOPG surface using a HFB carrier

A groundbreaking method for ordered molecular layer preparation on a solid surface employing the drop-stamp method has been developed by us taking advantage of the characteristics of the HFB molecule as a self-organizer/adsorption carrier. It is a smart method which can be used to prepare a self-organized protein layer on a solid surface without unspecific adsorption or defects. In our previous report, we clarified the self-organizing nature of HFB-tagged protein molecules on a surface of a solution droplet. In this report, a protein layer was prepared on a HOPG surface by using the drop-stamp method with a maltose binding protein (MBP)-tagged HFBII molecule. The structure of the stamped protein layer was investigated using frequency modulation atomic force microscopy (FM-AFM) in a liquid condition. The FM-AFM images show that the drop-stamp method can prepare an ordered protein layer on a solid surface smartly. The drop-stamp method using a HFB carrier is a practical method which can be used to prepare an ordered protein layer on a solid substrate surface without unspecific adsorption defects.     

Superconductivity in entirely end-bonded multiwalled carbon nanotubes

We report that entirely end-bonded multiwalled carbon nanotubes (MWNTs) can exhibit superconductivity with a transition temperature (T(c)) as high as 12 K, which is approximately 30 times greater than T(c) reported for ropes of single-walled nanotubes. We find that the emergence of this superconductivity is highly sensitive to the junction structures of the Au electrode/MWNTs. This reveals that only MWNTs with optimal numbers of electrically activated shells, which are realized by end bonding, can allow superconductivity due to intershell effects.