A stable dual-wavelength fiber laser with tunable wavelength spacing using a polarization-maintaining linear cavity

We propose and experimentally demonstrate a stable dual-wavelength erbium-doped polarization-maintaining (PM) fiber laser with tunable wavelength spacing using an all-PM linear cavity that makes use of two reflection peaks from the PM fiber Bragg grating (PM-FBG). Experimental results show stable dual lasing lines with a wavelength separation of ∼0.22 nm and a large optical signal-to-noise ratio (OSNR) of over 40 dB under room temperature. By applying axial strain to the PM-FBG, the center wavelengths of the two lasing lines can be tuned over several nanometers and the wavelength separation between the lasing lines can also be tuned to as small as 0.05 nm, which, to our knowledge, is the smallest wavelength spacing ever obtained from a stable room-temperature dual-wavelength fiber laser. The proposed laser configuration has the advantages of simple structure, low loss, stable dual-wavelength operation and a very small lasing linewidth of ∼5 kHz . PACS 42.55.Wd; 42.81.-i; 42.81.Gs     

On the SEP of Cooperative Diversity with Opportunistic Relaying

We analyze the exact symbol error probability (SEP) of cooperative diversity with opportunistic amplify-and-forward (AF) relaying. The benefit of this opportunism to the SEP is assessed by comparing with maximal ratio combining of orthogonal multiple AF relay transmissions.     

A Hammerstein-based dynamic model for hysteresis phenomenon

The Hammerstein configuration, which includes a nonlinear static block followed by a linear dynamic block, is applied to model the rate-dependent and temperature-dependent hysteresis phenomenon. The nonlinear static block is realized by a modified Preisach model, which includes both the irreversible and reversible components of magnetization. The linear dynamic block is realized by a low-pass filter, which takes into account the rate-dependent effects of hysteresis. Temperature dependencies are incorporated into the model by fitting the model parameters as piecewise-linear functions of temperature. A procedure is described for the extraction of a single set of model parameters over the frequency, amplitude, and temperature ranges of interest. The theory is verified experimentally     

A novel dynamic survivable routing in WDM optical networks with/without sparse wavelength conversion

In this paper, we study the dynamic survivable routing problem, both in optical networks without wavelength conversion and in optical networks with sparse wavelength conversion, and propose a novel hybrid algorithm for it based on the combination of mobile agents technique and genetic algorithms (GA). By keeping a suitable number of mobile agents in the network to cooperatively explore the network states and continuously report cycles (that are formed by two disjoint-link routes) into the routing tables, our new hybrid algorithm can promptly determine the first population of cycles for a new request based on the routing table of its source node, without the time consuming process associated with current GA-based lightpath protection schemes. We further improve the performance of our algorithm by introducing a more advanced fitness function that is suitable for both the above networks. Extensive simulation studies on the ns-2 network simulator show that our hybrid algorithm achieves a significantly lower blocking probability than the conventional survivable routing algorithms for all the cases we studied.     

Queueing analyses of traffic access control strategies withpreemptive and nonpreemptive disciplines in wideband integrated networks

A multiserver queueing model of access control strategies for a wideband integrated services digital network (ISDN) is considered. There are two types of service requests (SRs): Type 1 SR requires b servers (basic bandwidth units, BBUs) of the c available servers, while Type 2 SR requires a single server. Both types of SRs are queuable in two separate infinite-size buffers. A Type 1 SR is allowed to seize d(⩽b) servers at first and then acquire additional servers as they become available to meet the original requirement of b servers. The arrival processes of both types of SRs are Poisson and the service times are exponentially distributed with mean b/dμ₁ and 1/μ₂ for Type 1 SR and Type 2 SR, respectively. Preemptive and nonpreemptive priority disciplines with movable boundary are analyzed using the Neuts' matrix-analytic approach. Numerical examples of the queue length distribution and the mean waiting time of the SRs are presented     

Determination of uranium and thorium isotopes in soil samples by coprecipitation

Summary The paper presents a procedure to prepare soil samples for U and Th isotope measurement by alpha-spectrometry after coprecipitation with LaF₃. In this procedure the reduction of U(VI) to U(IV) was performed by Zn metal in 4M HCl solution. The recoveries of chemical separation equal to e_U-chemistry = 78±4% for uranium and e_Th-chemistry = 82±4% for thorium. Canberra alpha-spectrometer was used with PIPS detectors of A-1200-37-AM Model of 1200 mm² active area. The counting efficiency of the measuring system equals to e_counting = 18% and the total efficiencies were e_U = e_counting ^.e_U-chemistry = 14.0±0.7% for uranium and e_Th = e_counting ^.e_Th-chemistry = 14.7±0.7% for thorium. The recoveries of chemical separation were rather high (about 80%), that leads to the use of a small weight of soil sample (about 0.5 g). The efficiencies were also stable, that allows analyzing the soil sample without using radiotracers. They are advantages of the sample preparation procedure of this work.     

A 2.2 W, 80 MHz superscalar RISC microprocessor

A 28 mW/MHz at 80 MHz structured-custom RISC microprocessor design is described. This 32-b implementation of the PowerPC architecture is fabricated in a 3.3 V, 0.5 μm, 4-level metal CMOS technology, resulting in 1.6 million transistors in a 7.4 mm by 11.5 mm chip size. Dual 8-kilobyte instruction and data caches coupled to a high performance 32/64-b system bus and separate execution units (float, integer, loadstore, and system units) result in peak instruction rates of three instructions per clock cycle. Low-power design techniques are used throughout the entire design, including dynamically powered down execution units. Typical power dissipation is kept under 2.2 W at 80 MHz. Three distinct levels of software-programmable, static, low-power operation-for system power management are offered, resulting in standby power dissipation from 2 mW to 350 mW. CPU to bus clock ratios of 1×, 2×, 3×, and 4× are implemented to allow control of system power while maintaining processor performance. As a result, workstation level performance is packed into a low-power, low-cost design ideal for notebooks and desktop computers     

Co-doped In2O3 thin films: Room temperature ferromagnets

Laser-ablated Co-doped In₂O₃ thin films were fabricated under various growth conditions on R-cut Al₂O₃ and MgO substrates. All Co:In₂O₃ films are well-crystallized, single phase, and room temperature ferromagnetic. Co atoms were well substituted for In atoms, and their distribution is greatly uniform over the whole thickness of the films. Films grown at 550 °C showed the largest magnetic moment of about 0.5 μ_B/Co, while films grown at higher temperatures have magnetic moments of one order smaller. The observed ferromagnetism above room temperature in Co:In₂O₃ thin films has confirmed that doping few percent of magnetic elements such as Co into In₂O₃ could result in a promising magnetic material.     

Gap exponents for percolation processes with triangle condition

A study is made of the gap exponents for percolation processes with the triangle condition in the subcritical region. It is show that the gaps are given by _t =2 fort=2, 3,. Scaling theory predicts thatP _p (¦C ₀¦S(p))–(p _c –p) andE _p (1/¦C ₀¦; ¦C ₀¦S(p))–(p _c –p)³, whereS(p) is the typical cluster size. It is found that (p _c –p)P _p (|C ₀S(p) ^1–)(p _c –p)^1–2 and (p _c –p)³E _p (1/|C ₀|;|C ₀|S(p) ^1–))(p _c –p)^3–4.     

Immunochromatographic flow-injection method for detection of human serum immunoglobulin G antibodies to Helicobacter pylori

This study reports on the development of an immunochromatographic flow-injection (FI) method for the quantitation of human serum IgG antibodies to Helicobacter pylori. Patients’ sera were injected into the carrier stream of a FI manifold incorporating an H. pylori immuno-adsorbent reactor. The immuno-adsorbent was prepared by covalently linking H. pylori antigens to periodate oxidized Sepharose CL-4B. Any H. pylori antibody present in the serum is bound to the immuno-sorbent. The bound antibody was quantified by injecting into the carrier stream anti-human IgG peroxidase conjugate followed by TMB/H₂O₂ as the enzyme substrate. The FI system was optimized with respect to antigen loading (1.0 mg/ml gel), bioreactor length (3.0 cm), enzyme conjugate (0.2 mg/ml) and sample loop size (250 μl). One hundred clinical samples were analyzed for their H. pylori antibody concentrations and the results evaluated with respect to their receiver-operator characteristics (ROC). When a cut-off absorbance of between 0.7 and 0.75 was used for positive and negative samples a specificity (>95%), a sensitivity (>90%)and an overall accuracy (>94%) were obtained.