Pulse shape optimization in dispersion-limited direct detection optical fiber links

We study the theoretical limits of optical communication channels affected by chromatic dispersion. By using as a metric the energy transfer ratio, we find the optimal transmitted pulse shape that allows the impact of dispersion to be minimized. We show that these optimized pulses perform significantly better than standard nonreturn-to-zero/on-off keying (NRZ-OOK) modulation.     

A novel analytical approach to the evaluation of the impact offiber parametric gain on the bit error rate

We present in this paper a novel accurate method to analyze the performance of an optical link where the amplified spontaneous emission noise, enhanced by a fiber nonlinear phenomenon called parametric gain, is the limiting factor. Our method allows us to compute the exact error probability given a generic noise spectral density at the input of a direct detection optical receiver, using arbitrary optical and electrical filters. We compare our results with those predicted using the standard Gaussian technique (based on the Q factor), showing that this approximation may lead to significant errors. Our method is then used to evaluate the impact of parametric gain on a realistic long-haul multiwavelength link operating at 10 Gb/s, showing both the system limitation imposed by this phenomenon and the inaccuracy of the Q factor method     

The role of different soil sample digestion methods on trace elements analysis: a comparison of ICP-MS and INAA measurement results

The measurement of trace-element concentration in soil, sediment and waste, is generally a combination of a digestion procedure for dissolution of elements and a subsequent measurement of the dissolved elements. “Partial” and “total” digestion methods can be used in environmental monitoring activities. To compare measurement results obtained by different methods, it is crucial to determine and to maintain control of the bias of the results obtained by these methods. In this paper, ICP-MS results obtained after matrix digestion with modified aqua regia (HCl+HNO₃+H₂O₂) method and two “total” digestion methods (microwave aqua regia+HF and HNO₃+HF) are compared with those obtained by instrumental neutron activation analysis, a non-destructive analytical method for the determination of the total mass concentrations of inorganic components in environmental matrices. The comparison was carried out on eight agricultural soil samples collected in one test area and measured by k₀-INAA and ICP-MS to determine As, Co, Cr, Sb and Zn mass concentration. The bias of results for As, Cd, Co, Cr, Cu, Ni, Pb, Sb and Zn of the three digestion methods were assessed using selected measurement standards. This paper highlights that the digestion procedure is an integral part of the measurement and can affect the measurement result in environmental analysis.     

A time-domain optical transmission system simulation packageaccounting for nonlinear and polarization-related effects in fiber

The fast-paced evolution of long-haul and high-bit-rate terrestrial and submarine optical transmission links requires powerful analysis tools that take into account all the relevant phenomena in the fiber. To provide such a tool, we developed a time-domain optical system simulation package, integrated in the TOPSIM simulation environment. The fiber simulation module makes use of the vector form of the propagation equations to account for the quasi-degenerate two-mode (the two polarizations) medium propagation characteristics. This way, all polarization-related effects and their interplay with the other linear and nonlinear phenomena in the fiber can be accurately modeled. In particular, the fiber third-order susceptivity, responsible for all major nonlinear effects, is expressed in its actual vector form, so that nonlinear polarization mode coupling could be accounted for. Conventional birefringence and PMD are generated using appropriate random models. A novel feature of the simulator is that it uses time-domain digital filters to simulate dispersion effects, as opposed to the usual FFT-based algorithms. This approach leads to more efficient computing for a wide range of bandwidth and dispersion values. We present the fiber simulation module in detail. As an example of the use of the simulation package, the analysis of a long-haul two-channel transoceanic WDM transmission system is presented     

Slot Synchronization of a WDM Packet-Switched Slotted Ring

In this paper, we present two different strategies of slot synchronization in wavelength-division-multiplexing (WDM) packet-switched slotted-ring networks. Emphasis is given to the architecture behind the WDM optical network demonstrator over rings (WONDER) project, which is based on tunable transmitters and fixed receivers. The WONDER experimental prototype is currently being developed at the laboratories of Politecnico di Torino. In the former strategy, a slot-synchronization signal is transmitted by the master station on a dedicated control wavelength; in the latter, slave nodes achieve slot synchronization aligning on data packets that are received from the master. The performance of both synchronization strategies, particularly in terms of packet-collision probability, was evaluated by simulation. The technique based on transmitting a timing signal on a dedicated control wavelength achieves better performance, although it is more expensive due to the need for an additional wavelength. However, the technique based on aligning data packets that are received from the master, despite attaining lower timing stability, still deserves further study, particularly if limiting the number of wavelengths and receivers is a major requirement. Some experimental results, which were measured on the WONDER prototype, are also shown. Measurement results, together with theoretical findings, demonstrate the good synchronization performance of the prototype.     

RingO: an experimental WDM optical packet network for metro applications

This paper presents Ring Optical Network (RingO), a wavelength-division-multiplexing (WDM), ring-based, optical packet network suitable for a high-capacity metro environment. We present three alternative architectural designs and elaborate on the effectiveness of optic with respect to electronic technologies, trying to identify an optimal mix. We present the design and prototyping of a simple but efficient access control protocol, based upon the equivalence of the proposed network architecture with input-buffering packet switches. We discuss the problem of node allocation to WDM channels, which can be viewed as a particular optical network design problem. We, finally, briefly illustrate the fault protection properties of the RingO architecture. The main contribution of this paper is the identification and experimental validation of an innovative optical network architecture, which is feasible and cost effective with technologies available today, and can be a valid alternative to more consolidated solutions in metro applications.     

Polarization recovery in optical polarization shift-keying systems

For the first time, a solution to the problem of recovering and tracking the signal constellation at the receiver side for binary and octonary digital optical transmission systems employing the modulation of polarization (POLSK) is proposed and analyzed. The effect of two recovery algorithms on the system performance is evaluated in terms of power penalty induced at P(e)=10^-9, acquisition and tracking speed, and hardware complexity. The results show that very small penalties are obtainable in practical situations by properly designing the recovery algorithms     

A novel transmitter architecture for combined baseband data and subcarrier-multiplexed control links using differential Mach-Zehnder external modulators

We propose, analyze, and demonstrate a novel transmitter architecture for links that support transmission of base-band data and subcarrier multiplexed control channels. The architecture utilizes a differential external integrated-optic modulator to electrooptically combine the base-band and subcarrier multiplexed data onto an optical carrier. An analytical model is presented that allows optimization of the SNR of the received base-band and control data channels based on modulation parameters. This optimization is based on tradeoffs that result when the base-band and subcarrier channel are combined using a nonlinear modulator transfer function. We experimentally demonstrate a link based on this architecture with 2.5-Gb/s base-band and 100-Mb/s control data multiplexed on a 5.5-GHz subcarrier. Analytical and measured experimental results are compared and are shown to be in good agreement.     

Preparation of second generation ionic liquids by efficient solvent-free alkylation of N-heterocycles with chloroalkanes

Non-conventional techniques, such as microwave (MW) and power ultrasound (US) as well as combined MW/US irradiation, have been used to promote one-pot synthesis of second-generation ionic liquids (ILs), cutting down reaction times and improving yields. However, the use of chloroalkanes in the alkylation of N-heterocycles requires more drastic conditions if results are to match those obtained with more reactive alkyl halides. The present paper describes a series of MW- or MW/US-promoted IL preparations starting from chloroalkanes and classic heterocycles (1-methylimidazole, pyridine and 1-methylpyrrolidine). When reactions were carried out under conventional heating in an oil bath they required longer reaction times and gave poorer yields. (1)H-NMR analysis and ion-exchange chromatography showed that the present solventless procedure afforded ILs of satisfactory purity. The observed high yields (usually 70-98% isolated), and short reaction times showed that a straightforward access to ILs can be also achieved with the use of alkyl chlorides, resulting in a considerable reduction of costs.