Color Zone Map in Peripheral Vision at Various Illuminance Levels

We measured the entire region of mesopic and photopic vision to determine the color zone covering the visual field with unique red, yellow, green, and blue hue components. Eight kinds of test stimuli in the natural color system (NCS) color notation system were used. These stimuli were presented at horizontal and vertical meridians, and at meridians inclined at 45° angles. The illuminance level was set at six levels: 0.01 lx-1000 lx. The evaluation method measured chromatic, white, and black components as well as the hue component of the stimuli. Results show that the color zone of the retina extended further into the periphery with increasing illuminance; the response of opponent colors y-b was shown to be greater than that of the opponent colors r-g.     

Adaptive inverse filters for stereophonic sound reproduction

A general theoretical basis for the design of adaptive digital filters used for the equalization of the response of multichannel sound reproduction systems is described. The approach is applied to the two-channel case and then extended to deal with arbitrary numbers of channels. The intention is to equalize not only the response of the loudspeakers and the listening room but also the crosstalk transmission from right loudspeaker to left ear and vice versa. The formulation is a generalization of the Atal-Schroeder crosstalk canceler. However, the use of a least-squares approach to the digital filter design and of appropriate modeling delays potentially allows the effective equalization of nonminimum phase components in the transmission path. A stochastic gradient algorithm which facilitates the adaptation of the digital filters to the optimal solution, thereby providing the possibility of designing the filters in situ, is presented. Some experimental results for the two-channel case are given     

Traffic grooming on WDM rings using optical burst transport

A sublambda traffic-grooming scheme on wavelength-division-multiplexed (WDM) rings, which is called optical burst transport (OBT), is proposed. The network protocol and architecture allow increased flexibility to tailor the transport network behavior for efficient delivery of bursty data traffic. Using different network parameters, its performance is analyzed via simulation, and the implementation issues including the media-access-control (MAC) protocol, tunable-filter controller, and burst-mode receiver are addressed. Finally, the feasibility of the OBT with an experimental testbed built by the authors is demonstrated and a streaming-video application is used to present its overall functionality.     

Conditional Data Mapping Flip-Flops for Low-Power and High-Performance Systems

This paper introduces a new family of low-power and high-performance flip-flops, namely conditional data mapping flip-flops (CDMFFs), which reduce their dynamic power by mapping their inputs to a configuration that eliminates redundant internal transitions. We present two CDMFFs, having differential and single-ended structures, respectively, and compare them to the state-of-the-art flip-flops. The results indicate that both CDMFFs have the best power-delay product in their groups, respectively. In the aspect of power dissipation, the single-ended and differential CDMFFs consume the least power at data activity less than 50%, and are 31% and 26% less power than the conditional capture flip-flops at 25% data activity, respectively. In the aspect of performance, CDMFFs achieve small data-to-output delays, comparable to those of the transmission-gate pulsed latch and the modified-sense-amplifier flip-flop. In the aspect of timing reliability, CDMFFs have the best internal race immunity among pulse-triggered flip-flops. A post-layout case study is demonstrated with comparison to a transmission-gate flip-flop. The results indicate the single-ended CDMFF has 34% less in data-to-output delay and 28% less in power at 25% data activity, in spite of the 34% increase in size     

Reduction of the off-state current of polysilicon thin-filmtransistors by means of a polysilicon buffer layer

The off state current for polysilicon thin-film transistors for pixels in LCDs has been successfully reduced by introducing a polysilicon buffer layer between a polysilicon active layer fabricated by solid-phase-crystallisation (SPC) and a fused quartz substrate. Off-slate current of less than 1 pA under V_gs=-25 V at V_ds=3 V was obtained for n-channel single-gate coplanar transistors using the buffer layer (400 Å)     

Spacer effect of appended moieties for molecular recognition in doubly-sodium anthranilate modified γ-cyclodextrin

-Cyclodextrin with two sodium anthranilate moieties (1) has been prepared as a sensor for detecting organic compounds including terpenoids and steroids. Compound1 shows a pure monomer fluorescence whose intensity is increased or decreased upon addition of the guest species examined. In this system, the sodium anthranilate moieties act either as a spacer, which enables the cyclodextrin to form a 1:1 host-guest complex by narrowing the -cyclodextrin cavity, or as a hydrophobic cap.1 recognizes steroids with much higher sensitivity than terpenoids, in which the appended moieties act as a hydrophobic cap for terpenoids and a spacer for steroids, respectively.     

Identification and determination of sulphamethazine and N4-acetylsulphamethazine in meat by high-performance liquid chromatography with photodiode-array detection

A simple and selective method for the determination of sulphamethazine (SMT) and its metabolite, N4-acetylsulphamethazine (N4-AcSMT), in meat by high-performance liquid chromatography (HPLC) with photodiode-array detection was developed. The drugs were extracted from meat with 0.2% metaphosphoric acid-methanol (6:4), followed by a Bond-Elut C18 clean-up procedure. The HPLC separation was carried out on a Supersphere RP-18e column (125 X 4.0 mm I.D.) using 0.05 M sodium dihydrogenphosphate (pH 4.5)-acetonitrile (8:2) as the mobile phase at a flow-rate of 0.5 ml/min, and monitored with a photodiode-array detector. The recoveries of SMT and N4-AcSMT from meat fortified at 0.5 micrograms/g were 90.1-93.3 and 93.0-94.4%, respectively, with coefficients of variation of 1.9-3.2 and 1.5-2.7%. The limits of detection were 0.02 micrograms/g for each drug. SMT was found in ten samples of imported meat (12.5%) at levels ranging from 0.05 to 1.05 micrograms/g.     

Spectrofluorimetric assay for acyl CoA-cholesterol acyltransferase

A sensitive assay for acyl CoA-cholesterol acyltransferase (EC 2.3.1.26) in rat liver microsomal and mitochondrial preparations is described. The lowered cholesterol concentration in the enzyme reaction with oleoyl CoA is determined spectrofluorimetrically by using the cholesterol oxidase/peroxidase/p-hydroxyphenylpropionic acid system. The assay requires as little as 20 μg of protein in the enzyme preparation.