On the design considerations of solid-state power amplifiers for satellite communications: A systems perspective

Conventional solid-state power amplifier (SSPA) design approach isolates radio frequency (RF) design from communication theory. In this paper, a unified SSPA design approach is proposed, which optimizes SSPA parameters (bias voltage and input RF signal power) to minimize total DC power consumption while satisfying received SNR constraint specified by the link budget. The effect of SSPA nonlinearity is quantified by the error vector magnitude measured at its output and the corresponding received SNR degradation is analyzed. Using the quantitative metrics for received SNR, it is possible to evaluate highly nonlinear SSPA classes such as Class-B or deep-Class AB, which are normally not considered in conventional SSPA design approach to be used in satellite communication applications.     

Piezoelectric Sensors Operating at Very High Temperatures and in Extreme Environments Made of Flexible Ultrawide-Bandgap Single-Crystalline AlN Thin Films

Extreme environments are often faced in energy, transportation, aerospace, and defense applications and pose a technical challenge in sensing. Piezoelectric sensor based on single-crystalline AlN transducers is developed to address this challenge. The pressure sensor shows high sensitivities of 0.4–0.5 mV per psi up to 900 °C and output voltages from 73.3 to 143.2 mV for input gas pressure range of 50 to 200 psi at 800 °C. The sensitivity and output voltage also exhibit the dependence on temperature due to two origins. A decrease in elastic modulus (Young's modulus) of the diaphragm slightly enhances the sensitivity and the generation of free carriers degrades the voltage output beyond 800 °C, which also matches with theoretical estimation. The performance characteristics of the sensor are also compared with polycrystalline AlN and single-crystalline GaN thin films to investigate the importance of single crystallinity on the piezoelectric effect and bandgap energy-related free carrier generation in piezoelectric devices for high-temperature operation. The operation of the sensor at 900 °C is amongst the highest for pressure sensors and the inherent properties of AlN including chemical and thermal stability and radiation resistance indicate this approach offers a new solution for sensing in extreme environments.     

Iron speciation by solid phase extraction and flame atomic absorption spectrometry using N,N′-bis-(2-hydroxy-5-bromobenzyl)-2-hydroxy-1,3-diiminopropane

A new Schiff base, N,N′-bis-(2-hydroxy-5-bromobenzyl)-2-hydroxy-1,3-diiminopropane, has been synthesized for the very sensitive determination of iron(III) and iron(II) in natural water samples. It enabled a very selective and rapid method for iron determination to be developed. The method has also been applied to total iron determination in sediment samples. In the preconcentration system, the Schiff base reagent is mixed with the samples and chelates containing iron(III). The complexes are then adsorbed on silica gel within a column system. Elution of the adsorbed chelate from the silica gel was performed with a small volume of acetone containing 2.5% nitric acid. The iron is measured off-line by flame atomic absorption spectrometry. The method can be applied to the preconcentration, separation and speciation of iron. The effects of parameters such as pH, sample flow rate, eluent flow rate, foreign ions and ligand concentration have been investigated. The effect of humic acid that can produce complexes with metal ions in natural systems has also been investigated. The results obtained indicate that the method is not affected by the presence of up to 10 ppm humic acid, which would be a very high concentration to be present in natural systems. The solid phase extraction method developed has been applied to the determination of iron in both natural water samples and sediment samples. The LOD was found to be 0.17 mg L⁻¹ when no preconcentration was used, although preconcentration factors of 100 could be achieved. The recovery values for spiked samples were between 100 and 104%. The results were compared statistically with those from the standard 1,10 phenanthroline method used for iron speciation in water systems. A Student’s t-test indicated no significant difference between the two methods. In addition, this method was applied to the analysis of a certified sediment sample, LGC 6156. Generally, a 10-fold preconcentration factor was required for the analysis of natural water samples.     

Effective binuclear Pd(II) complexes for Suzuki reactions in water

A series of new ionic binuclear Pd(II) complexes supported by water‐soluble bis(α‐diimine) ligands were prepared and employed as catalysts for the palladium‐catalyzed Suzuki reaction in aqueous media. The binuclear nature of the complexes increased the reaction rate, while electronic and steric modification of the ligand frameworks had a remarkable influence upon the catalytic activity of the palladium complexes. The catalysts were shown to be homogeneous through mercury poisoning experiments and complexes could be recycled more than 10 times without loss of catalytic activity. Copyright © 2013 John Wiley & Sons, Ltd.     

Optimal throughput performance in full-duplex relay assisted cognitive networks

Wireless Networks - In this paper, we study a full-duplex cooperative cognitive radio network with multiple full-duplex secondary users acting as potential relays for transmitting the packets of a...     

Lithium-Ion Desolvation Induced by Nitrate Additives Reveals New Insights into High Performance Lithium Batteries

Electrolyte additives have been widely used to address critical issues in current metal (ion) battery technologies. While their functions as solid electrolyte interface forming agents are reasonably well-understood, their interactions in the liquid electrolyte environment remain rather elusive. This lack of knowledge represents a significant bottleneck that hinders the development of improved electrolyte systems. Here, the key role of additives in promoting cation (e.g., Li⁺) desolvation is unraveled. In particular, nitrate anions (NO₃⁻) are found to incorporate into the solvation shells, change the local environment of cations (e.g., Li⁺) as well as their coordination in the electrolytes. The combination of these effects leads to effective Li⁺ desolvation and enhanced battery performance. Remarkably, the inexpensive NaNO₃ can successfully substitute the widely used LiNO₃ offering superior long-term stability of Li⁺ (de-)intercalation at the graphite anode and suppressed polysulfide shuttle effect at the sulfur cathode, while enhancing the performance of lithium–sulfur full batteries (initial capacity of 1153 mAh g⁻¹ at 0.25C) with Coulombic efficiency of ≈100% over 300 cycles. This work provides important new insights into the unexplored effects of additives and paves the way to developing improved electrolytes for electrochemical energy storage applications.     

Wind turbine speed control of a contactless piezoelectric wind energy harvester

ABSTRACT

Wind turbine control is an important task to make the electricity generation secure in terms of energy demand and machine safety. It also yields to control the desired power level and optimized energy because of the assignment of turbine speed. The contactless piezoelectric wind energy harvester (CPWEH) used in this study has three piezoelectric layers located around the shaft with 120 degrees apart and they are buckled by the magnetic force without any physical contact. The superiority of this device is to generate energy for low wind speeds such as 1.5 m/s. However, for high speeds, high total harmonic distortions (THDs) govern the waveforms, thus controlling the turbine speed becomes necessary for optimizing the output power. Encouraged by this, a small low inertia dc generator is coupled with the wind turbine, and the generator terminals are connected to a resistor through a power switch to generate a braking torque that opposes to wind speed direction. By controlling the switch properly, turbine speed is ensured to remain within a certain band, which accordingly prevents the turbine from rotating very fast at damaging wind speeds. Several experiments are performed on the developed CPWEH with/without the presented control scheme which prove the existence of promising performance of our proposal.     

Statistics and characterization of matrices by determinant and trace

The Ramanujan Journal - Answering a question of Erdös, Komlós proved in 1968 that almost all $$n\times n$$ Bernoulli matrices are nonsingular as $$n\rightarrow \infty $$ . In this paper,...     

A novel amperometric hydrogen peroxide biosensor based on pyrrole-PAMAM dendrimer modified gold electrode

Horseradish peroxidase (HRP) was immobilized into an electrochemically prepared copolymer of pyrrole–PAMAM (PAMAM; polyamidoamine) dendrimers for the construction of amperometric hydrogen peroxide biosensor. First, second, and third generation amidoamine–pyrrole dendrons having branched amine periphery and focal pyrrole functionality were synthesized via divergent pathway. Pyrrole dendrimers were covalently attached onto the electrode surface and polymerized by electrochemical copolymerization with pyrrole monomer. The synthesized dendrimers and copolymers have been characterized by FTIR-ATR and NMR. These copolymers have been utilized as conducting films for amperometric hydrogen peroxide sensing. The HRP retains its bioactivity after immobilization into the dendronized pyrrole-copolymers. Amperometric response was measured as a function of concentration of hydrogen peroxide, at fixed potential of +0.35 V vs. Ag/AgCl in a phosphate buffered saline (pH 7.5). The effect of pH and temperature of the medium, storage, and reusability properties were investigated. The results indicate an efficient immobilization of enzyme onto the PAMAM type dendrimer modified surface containing pyrrole monomer, which leads to high enzyme loading, and increased lifetime stability of the electrode.