Disparity field and depth map coding for multiview 3D image generation

In the present paper techniques are examined for the coding of the depth map and disparity fields for stereo or multiview image communication applications. It is assumed that both the left and right channels of the multiview image sequence are coded using block- or object-based methods. A dynamic programming algorithm is used to estimate a disparity field between each stereo image pair. Depth is then estimated and occlusions are optionally detected, based on the estimated disparity fields. Spatial interpolation techniques are examined based on the disparity/depth information and the detection of occluded regions using either stereoscopic or trinocular camera configurations. It is seen that the presence of a third camera at the transmitter site improves the estimation of disparities, the detection of occlusions and the accuracy of the resulting spatial interpolation at the receiver. Various disparity field and depth map coding techniques are then proposed and evaluated, with emphasis given to the quality of the resulting intermediate images at the receiver site. Block-based and wireframe modeling techniques are examined for the coding of isolated depth or disparity map information. Further, 2D and 3D motion compensation techniques are evaluated for the coding of sequences of depth or disparity maps. The motion fields needed may be available as a byproduct of block-based or object-based coding of the intensity images. Experimental results are given for the evaluation of the performance of the proposed coding and spatial interpolation methods.     

Static light scattering,ultraviolet–visible,and fluorescence spectroscopy from fluorescent methyl methacrylate/benzazole dye copolymers displaying an intramolecular proton‐transfer mechanism in the electronically excited state

The solution behavior of new copolymers of methyl methacrylate and benzazole dyes emitting fluorescence because of an intramolecular proton‐transfer mechanism in the electronically excited state has been investigated by static light scattering, fluorescence spectroscopy, ultraviolet–visible, and gel permeation chromatography. In the dilute regime, with tetrahydrofuran (THF) and chloroform as solvents, the copolymers behave as typical polydisperse linear chains in good solvents. The analysis of the osmotic modulus for concentrated solutions in THF (c ≥ 60 g L^?1) indicates the existence of an interchain association mechanism. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 341–350, 2003     

Analysis of nitrite and nitrate as 1-nitro-2,4,6-trimethoxybenzene derivatives by reversed-phase HPLC with UV-detection

Summary A reversed-phase HPLC method for the determination of nitrite and nitrate in aqueous solutions, biological buffers and human urine is described. The method is based on the conversion of nitrite and nitrate into their 1-nitro-2,4,6-trimethoxybenzene (NTBM) derivatives by using 1,3,5-trimethoxybenzene and concentrated sulphuric acid. NTMB is extracted by benzene, the solvent evaporated, the residue reconstructed in methanol/water (3/4, v/v) and subsequently analyzed by reversed-phase HPLC and UV detection (360 nm). The specificity of the nitration reaction, good reproducibility (C.V. 6.2%) and high sensitivity (8.4 ng nitrite) show the applicability of this method to the quantitative analysis of nitrite and nitrate in several matrices including human urine.     

Determination of nitrite as pentafluorobenzyl derivative by RP-HPLC and UV detection with and without ion-pair extraction

Summary A reversed-phase high-performance liquid chromatographic (RP-HPLC) method with UV detection (270 nm) for the determination of nitrite as its pentafluorobenzyl derivative with and without ion-pair extraction is described. Ion-pair extraction of nitrite from aqueous solutions was performed by using a 1 mol/l solution of the liquid ion exchanger methyltrioctylammonium chloride in toluene. The residue of the ion-pair extraction or an aliquot of an aqueous nitrite solution or of a biological fluid (100 l) were treated with 400 l of acetone and 10 l of pentafluorobenzyl bromide. Nitrite was converted into its pentafluorobenzyl derivative by heating at 50°C for 90 min. After evaporation of acetone the aqueous phases were diluted with 100 to 400 l of methanol, and up to 100 l were injected into the RP-HPLC system. The method allows accurate analysis of nitrite in the presence of nitrate directly in aqueous solutions and biological fluids in concentrations down to 2.0 mg/l. The method is also applicable to the determination of nitrate following its reduction to nitrite by cadmium.     

Quantitative determination of paraffin oil in blood by capillary gas chromatography

A capillary gas chromatographic method is described for the quantitative determination of liquid paraffin in blood. Paraffin is extracted from blood into n-heptane. After solvent evaporation and dissolution of the residue in 100–200 μl n-heptane one μl is injected into a gas chromatograph fitted with a fused silica capillary column (Permabond® OV-1-CB-0.1, 10 m × 0.32 mm i.d.) and flame ionization detector. Analysis is performed by using an oven program [50°C (3 min)?285°C (5 min), rise 10%min]. The sensitivity (1.5 ng hexadecane) and the reproducibility prove the applicability of the method for the determination of liquid paraffin in blood and for the study of the stability of the liquid paraffin hollow fiber membranes used in an extracorporeal liver support system.     

Preliminary characterization of anhydrous ethanol used in Brazil as automotive fuel

This work reports preliminary studies on the characterisation of anhydrous ethanol (AEA) used as an automotive fuel mixed with gasoline in Porto Alegre (South Brazil). Pre-concentration of the impurities contained in 1000 ml of AEA was carried on through solid-phase extraction using XAD4 resin. The main compounds in the extract were identified by means of spectral data from the library of the equipment. The concentrate was then fractionated using a preparative liquid chromatographic column filled with activated silica gel and the elution procedure was carried out with, n-hexane, n-hexane-benzene (1:1, v/v) and dichloromethane. Prior to analysis by GC-MS, each fraction was reduced to 1 ml with a gentle stream of nitrogen. Saturated linear hydrocarbons and aromatic hydrocarbons eluted in the first fraction and oxygenated compounds such as aldehydes. ketones and alcohols, eluted in the second one. were the main compounds detected in the sample.     

Avoiding linear dependencies in LFSR test pattern generators

Linear Feedback Shift Registers (LFSRs) constitute a very efficient mechanism for generating pseudoexhaustive or pseudo-random test sets for the built-in self-testing of digital circuits. However, a well-known problem with the use of LFSRs is the occurrence of linear dependencies in the generated patterns. In this paper, we show for the first time that the amount of linear dependencies can be controlled by selecting appropriate characteristic polynomials and reordering the LFSR cells. We identify two classes of such polynomials which, by appropriate LFSR cell ordering, guarantee that a large ratio of linear dependencies cannot occur. Experimental results show significant enhancements on the fault coverage for pseudo-random testing and support the theoretical relation between minimization of linear dependencies and effective fault coverage.This work was partially supported by NSF grant MIP-9409905, a 1993–94 ACM/IEEE Design Automation Scholarship and a grant from Nissan Corporation. A preliminary version of this work appeared in A Class of Good Characteristic Polynomials for LFSR Test Pattern Generators, in Proc. of IEEE International Conference on Computer Design, Oct. 1994, pp. 292–295, where it received the ICCD'94 Best Paper Award.     

An iminophosphine dendrimeric ligand and its evaluation in the Heck reaction

DAB-dendr-(NH₂)₃₂ has been modified to produce two novel dendrimeric P,N-ligands, DAB-dendr-[1,2-(NCHC₆H₄PPh₂)]₃₂ and DAB-dendr-[1,2-(NHCH₂C₆H₄PPh₂)]₃₂. These were both found to activate electron rich aryl bromides in the Heck reaction. The reactions seem to proceed better in a novel solvent system consisting of an equimolar mixture of a tertiary amine with acetic acid. A marked dependence of the conversion on the [equivalents of dendrimeric ligand]/[Pd] ratio has been observed with conversion decreasing as the ratio of dendrimer equivalents to Pd increases. This phenomenon is attributed to interactions of the arms bearing the metal with neighboring ones within the dendrimer.     

Hydrothermal Synthesis of Siderite and Application as Catalyst in the Electro-Fenton Oxidation of p-Benzoquinone

A weak aspect of the electro-Fenton (EF) oxidation of contaminants is the dependence of the Fenton reaction on acidic pH values. Therefore, the rationale of this work was to develop a novel catalyst capable of promoting the EF oxidation process at near-neutral and basic pH values. In this framework, rhombohedral FeCO₃ was synthesized hydrothermally and used as a catalyst in the EF oxidation of p-benzoquinone (BQ). The catalyst was characterized using various surface and spectroscopic methods. Moreover, the effects of applied current (100–500 mA), time (1–9 h), catalyst dosage (0.25–1.00 g L⁻¹), and initial concentration of BQ (0.50–1.00 mM) on the total organic carbon removal efficiency were determined. The results indicated that a 400 mA current was sufficient for a 95% total organic carbon removal and that the increase in catalyst dosage had a positive effect on the mineralization of BQ. It was determined that at pH 3, FeCO₃ behaved like a homogeneous catalyst by releasing Fe³⁺ ions; whereas, at the pH range of 5–7, it shifted to a homogeneous/heterogeneous catalyst. At pH 9, it worked solely as a heterogeneous catalyst due to the decrease of Fe ions passing into the solution. Finally, the spent catalyst did not undergo structural deformations after the EF treatment at higher pH values and could be regenerated and used several times     

Synthesis of 2D Germanane (GeH): a New,Fast, and Facile Approach

Germanane (GeH), a germanium analogue of graphane, has recently attracted considerable interest because its remarkable combination of properties makes it an extremely suitable candidate to be used as 2D material for field effect devices, photovoltaics, and photocatalysis. Up to now, the synthesis of GeH has been conducted by substituting Ca by H in a β‐CaGe₂ layered Zintl phase through topochemical deintercalation in aqueous HCl. This reaction is generally slow and takes place over 6 to 14 days. The new and facile protocol presented here allows to synthesize GeH at room temperature in a significantly shorter time (a few minutes), which renders this method highly attractive for technological applications. The GeH produced with this method is highly pure and has a band gap (E_g) close to 1.4 eV, a lower value than that reported for germanane synthesized using HCl, which is promising for incorporation of GeH in solar cells.