Evanescently coupled photodiodes integrating a double-stage taper for 40-Gb/s applications-compared performance with side-illuminated photodiodes

The design, fabrication, and performance of double-stage taper photodiodes (DSTPs) are reported. The objective of this work is to develop devices compatible with 40-Gb/s applications. Such devices require high efficiency, ultrawide band, high optical power handling capability, and compatibility with low-cost module fabrication. The integration of mode size converters improves both the coupling efficiency and the responsivity with a large fiber mode diameter. Responsivity of 0.6 A/W and 0.45 A/W are achieved with a 6-/spl mu/m fiber mode diameter and cleaved fiber, respectively, providing relaxed alignment tolerances (/spl plusmn/1.6 /spl mu/m and /spl plusmn/2 /spl mu/m, respectively), compatible with cost-effective packaging techniques. DSTPs also offer a wide bandwidth greater than 40 GHz and transverse-electric/transverse-magnetic polarization dependence lower than 0.2 dB. Furthermore, a DSTP saturation current as high as 11 mA results in optical power handling greater than +10 dBm and a high output voltage of 0.8 V. These capabilities allow the photodiode to drive the decision circuit without the need of a broad-band electrical amplifier. The DSTP devices presented here demonstrate higher responsivities with large fiber mode diameter and better optical power handling capabilities and are compared with classical side-illuminated photodiodes.     

Controlled structure and density of “living” polystyrene brushes on flat silica surfaces

Thin layers of polystyrene were grown from surface-grafted nitroxide initiators via controlled “living” free radical polymerization. The “reactive” Langmuir-Blodgett deposition method allowed an effective control of the initiator layer density leading to PS brushes with different and high grafting density and stretching. The influence of the grafting density on the layer structure was studied. Comparison with theoretical predictions for monodispersed brushes in bad solvent was discussed. The thickness was found to vary linearly with molecular weight and the density dependence was shown using wetting measurements. Special features of controlled radical nitroxide polymerization from a surface were discussed. A direct comparison of the molecular weight and polydispersity between surface and bulk polymers was made by de-grafting the brushes into a toluene/HF solution. Finally, some evidence of a “surface Fischer” effect was shown from re-initiated layers. Received 20 December 2001     

High-speed tandem of MQW modulators for coded pulse generation with 14-dB fiber-to-fiber gain

We report on a tandem of electroabsorption modulators integrated with an amplifier by the identical active layer (IAL) approach. A 14 dB fiber-to-fiber is obtained by the use of constant As-P ratio MQW active layer and operation at 10 Gb/s is demonstrated. A record modulator saturation power of 35 mW is also reported.     

First measurement of the ϱ spectral function in nuclear collisions

The NA60 experiment at the CERN SPS has studied low-mass muon pairs in 158 A GeV In–In collisions. A strong excess of pairs is observed above the yield expected from neutral meson decays. The unprecedented sample size close to 400000 events and the good mass resolution of about 2% made it possible to isolate the excess by subtraction of the decay sources. The shape of the resulting mass spectrum shows some non-trivial centrality dependence, but is largely consistent with a dominant contribution from π⁺π^-→ϱ→μ⁺μ^- annihilation. The associated ϱ spectral function exhibits considerable broadening, but essentially no shift in mass. The p_T-differential mass spectra show the excess to be much stronger at low p_T than at high p_T. The results are compared to theoretical model predictions; they tend to rule out models linking hadron masses directly to the chiral condensate. PACS 25.75.-q; 12.38.Mh; 13.85.Qk     

Color quantitation through image processing in dermatology

Classical color models and their applications to computer vision are reviewed. The performances of color quantitation from digitized images are compared with those derived from a chromameter. The color quantitation obtained from either digitized color slides or directly digitized images is proved to be more efficient than the conventional visual assessment of observers. A methodology is proposed for determining the specific color indices which are needed in dermatology. An application of this methodology is developed for designing a blanching quantitation index in order to replace the visual assessment during McKenzie tests.     

Differential scanning calorimetry studies on aged iron(III)-chromium(III)-hydroxide coprecipitates

DSC measurements in air from 20 to 800° are reported on aged iron(III)-chromium(III) coprecipitated hydroxides (with Fe³⁺Cr³⁺ wt% ratios of 91, 73, 11, 37 and 19). A comparison of the DSC profiles of aged coprecipitates with the thermal behaviour of freshly precipitated and well characterized samples provided information on the modification occurring in the structure and reactivity of the coprecipitates on prolonged aging.

---

Zusammenfassung Es werden DSC-Messungen an gealterten kogefällten Eisen(III)Chrom(III)-hydroxiden (mit Fe³⁺Cr³⁺ Gewichtsanteilen von 91, 73, 11, 37 und 19) im Temperaturbereich von 20 bis 800° beschrieben. Ein Vergleich der DSC-Profile von gealterten Kofällungen mit dem thermischen Verhalten frisch gefällter und gut definierbarer Proben lieferte Informationen über die Veränderungen in Struktur und Reaktivität der Koniederschläge bei längerem Altern.

---

---

Dedicated to Professor Wahid U. Malik, Founder-President, Indian Council of Chemists, India, with profound regards and fond memories of his youthful enthusiasm and ceaseless and pioneering efforts towards the development of chemical education and research activities at the University of Roorkee, Roorkee, India, on the occasion of his 70th birthday.

---

Paper presented at the World Conference on Thermal Analysis, Capri (Italy), 1989.

---

We thank Professor J. Pescia, Dr.G. Ablart and N. Favillier of Laboratoire de Magnétisme et d'Electronique Quantique for their interest in this work. A. C. Vajpei expresses his gratefulness to C.N.R.S. and C.N.O.U.S., Paris, for financial support of this work.     

Thermal degradation of poly(methyl-n-hexylsilylene)

Thermal degradation of poly(methyl-n-hexylsilane) in the solid state in absence of oxygen reveals formation of a cyclic pentamer between 150 and 250°C. Polymer is gradually degraded to an intermediate molecular weight distribution. The weight average of this new distribution is not only temperature-dependent, but is also a function of viscosity of the polymer and nature of chain ends. As no insolubles or Si? H groups are formed, the degradation mechanism is most likely a back-biting mechanism induced by active chain ends such as silyl anions or Si? Cl rather than a homolytic cleavage of the main chain. A concurrent intramolecular rearrangement reaction is also proposed. Moreover, this study proposes an explanation to the trimodal molecular weight distribution obtained by the Wurtz coupling of dichlorosilanes with molten sodium in refluxing toluene. © 1995 John Wiley & Sons, Inc.     

Curing of a maleimide model compound

A monofunctional maleimide-ended model compound was synthesized and purified. The thermal curing of this compound was followed by size exclusion chromatography and the molecular masses of the oligomers formed during the curing reaction were determined by mass spectroscopy. It was found that high molecular mass species were not thermally stable. At high temperature and after enough time, a strong decrease in the polydispersity of the oligomers and a significantly preferential formation of trimer were observed. From ¹³C-NMR characterization, a five membered ring structure was found for the trimer, which explains the thermal stability of this species. © 1995 John Wiley & Sons, Inc.     

Maleic anhydride homopolymerization during melt functionalization of isotactic polypropylene

The homopolymerization of maleic anhydride was attempted at 190°C, during the melt-functionalization of polypropylene, either with or without organic peroxide using a Brabender plastograph. The free radical homopolymerization of pure maleic anhydride was also attempted either with or without organic peroxide, at 190°C, in vacuum-sealed glass vials. In all cases, free low molecular weight maleic anhydride oligomers were observed by low molecular weight size exclusion chromatography (SEC). This maleic anhydride homopolymerization tends to prove that the ceiling temperature of poly(maleic anhydride) probably lies above the previously published value of 160°C for these specific experimental conditions. © 1996 John Wiley & Sons, Inc.     

Bisphenol-A polycarbonate–poly(butylene terephthalate) transesterification. II. Structure analysis of the reaction products by IR and 1H and 13C NMR

The structure of the four-component copolyester resulting from the exchange reaction between molten bisphenol-A polycarbonate and poly(butylene terephthalate) is analyzed as a function of the reaction time by infrared and nuclear magnetic resonance spectroscopy. By applying a statistical method developed earlier, the mean chain length of the various sequences as well as the degree of randomness is computed. The exchange reaction leads initially to the formation of a block copolyester with reduced solubility. As the reaction proceeds, a soluble random copolycondensate is progressively formed.