Novel T-rail electrodes for substrate removed low-voltage high-speed GaAs/AlGaAs electrooptic modulators

A novel traveling-wave electrode utilizing capacitively loaded T-rail elements was developed for low-voltage high-speed substrate-removed GaAs/AlGaAs electrooptic modulators. Electrodes with varying dimensions were fabricated and characterized. Electrode phase velocity, characteristic impedance, loss coefficient, and capacitive loading were extracted from the measured s-parameters up to 40 GHz. Electrode was also simulated using a finite-element solver. The measured and calculated electrode capacitance values were found to be in excellent agreement, showing that the electrode can be precisely designed. Approaches were outlined to provide a group velocity-matched very high-speed modulator electrode suitable for a low drive-voltage substrate-removed GaAs/AlGaAs electro-optic modulator     

Order restricted randomized designs for control versus treatment comparison

We develop a method of randomizing units to treatments that relies on subjective judgement or on possible coarse modeling to produce restrictions on the randomization. The procedure thus fits within the general framework of ranked set sampling. However, instead of selecting a single unit from each set for full measurement, all units within a set are used. The units within a set are assigned to different treatments. Such an assignment translates the positive dependence among units within a set into a reduction in variation of contrasting features of the treatments. A test for treatment versus control comparison, with controlled familywise error rate, is developed along with the associated confidence intervals. The new procedure is shown to be superior to corresponding procedures based on completely randomized or ranked set sample designs. The superiority appears both in asymptotic relative efficiency and in power for finite sample sizes. Importantly, this test does not rely on perfect rankings; rather, the information in the data on the quality of rankings is exploited to maintain the level of the test when rankings are imperfect. The asymptotic relative efficiency of the test is not affected by estimation of the quality of rankings, and the finite sample performance is only mildly affected.     

An Infrared Spectroscopic Study on the Hofmann- and en-Td-type Clathrates: Mn(NH3)2Zn(CN)4 .2benzene and Mn(ethylenediamine)Zn(CN)4.2benzene

Infrared spectra of Mn(NH₃)₂Zn(CN)₄.2C₆H₆ andMn(ethylenediamine)Zn(CN)₄.2C₆H₆ are reported. The spectral data suggest that these compounds are similar in structure toHofmann-T_d-type and the en-T_d-type clathrates,respectively. There is good evidence for H-bonding from ammoniaN–H to benzene as a to H-bond.     

Vibrational Spectroscopic Studies on the tn-Td-Type Mn(tn)Zn(CN)4_2C6H6 and the Chelated tn-Td-Type Zn(tn)Zn(CN)4_2C6H6 Clathrates

IR spectra of Mn(trimethylenediamine)Zn(CN)₄2C₆H₆ and IR and Raman spectra of Zn(trimethylenediamine)Zn(CN)₄_2C₆H₆ are reported. The spectral data suggest that the host frameworks of these compounds are similar to those of the tn-Td-type Cd(trimethylenediamine)M(CN)₄_2benzene (M = Cd or Hg) and the chelated pn-Td-type Cd(propylenediamine)Cd(CN)₄_1,2-dichloro-ethane clathrates, respectively.     

Synthesis of 5,6-O-Cyclohexylidene-1-amino-3-azahexane and Its Co(II), Ni(II), Cu(II) Complexes

5,6-O-Cyclohexylidene-1-amino-3-azahexane (L) is synthesized from 1-chloro-2,3-O-cyclohexylidenepropane, which is prepared by the reaction between epichlorohydrin and cyclohexanone. In this reaction, BF₃ · OEt₂ is used as a catalyst. Complexes of Co(II), Ni(II) and Cu(II) acetates with this ligand are prepared. The structures of the ligand and its complexes are proposed based on elemental analysis, IR and UV-VIS spectroscopy, magnetic susceptibility, conductometry, and ¹H and ¹³C NMR spectroscopy.     

New 3-hydroxyflavone derivatives for probing hydrophobic sites in microheterogeneous systems

Nine new 3-hydroxyflavone derivatives as fluorescent molecular sensors having two well-separated emission bands were synthesized. These sensors can occupy well-determined locations and orientations in macromolecular ensembles, such as micelles due to their finely-tuned designs. These polarity-sensitive dyes can incorporate into the anhydrous hydrophobic core of aqueous micelles.     

The annealing behavior of implanted nitrogen in fcc stainless steel

Post-implantation annealing of N-implanted 304 stainless steel at 400 °C has been investigated by conversion electron Mössbauer spectroscopy, X-ray diffraction and Auger electron spectroscopy. After a 1 h anneal, the near complete dissolution of the as-implanted Fe₂N-like nitride phase results in a 9 at.% N fcc solid-solution phase. After the final anneal (64 h), N has diffused to a depth of about 2 m and remains in solid solution with an average content of 4 at.%. An average N diffusion coefficient at 400 °C is estimated to be 10^-12-10^-14 cm²/s, depending on anneal time, too small to explain the deep penetration observed in high-flux, high-dose N-implanted stainless steel. The present results provide additional evidence for beam controlled N migration where Cr plays an important role.     

WSANFlow: An Interface Protocol Between SDN Controller and End Devices for SDN-Oriented WSAN

When dealing with a Wireless Sensor and Actuator Network (WSAN) structure, one of the challenging problems is lack of flexibility in such network operations as establishment, management, and configuration. Software-defined Networking (SDN) is a promising technology for a simpler, more flexible, and less overworked network structure. Integration of SDN as a solution into the existing WSAN structures seems to be a strong candidate of deployment solutions for next generation WSAN systems. In order to get enhanced performance results for WSAN systems, we proposed an interface protocol, referred to as WSANFlow, which is responsible for all the communications between SDN controller (SDNC) and SDN-oriented end devices. The SDNC in this approach has the network intelligence and is capable of handling all the control and management operations related to the network. Thus, advanced communication operations can be managed and efficiently optimized efficiently by the SDN controller and then, subsequently, corresponding instructions can be delivered to end devices using the proposed WSANFlow protocol. In the study, we analyzed the proposed framework performance, in terms of power consumption ratio, throughput, and end to end delay metrics. Then, we compared the results with those of a ZigBee-based counterpart for different workloads such as; light, heavy and heavier load which modelizes a video stream of mild parameters. The results show that not only has the overall performance of the existing WSAN system been enhanced, but also control and management operations have been simplified by the proposed model.     

Solutions in the Discrete Fractional Forms of Two Differential Equations with Singular Points

Acta Mathematicae Applicatae Sinica, English Series - In present note, we apply the Leibniz formula with the nabla operator in discrete fractional calculus (DFC) due to obtain the discrete...     

Solutions in the Discrete Fractional Forms of Two Differential Equations with Singular Points

Acta Mathematicae Applicatae Sinica, English Series - In present note, we apply the Leibniz formula with the nabla operator in discrete fractional calculus (DFC) due to obtain the discrete...