The speciation of arsenic in seawater and marine species

Dissolved inorganic arsenic species were determined in natural waters and selected marine species. Prior to irradiation by NAA samples were preconcentrated and the As(III) and As(V) species separated by APCDT-chloroform extraction. Marine samples were digested by microwave heating. Interpretation of data was achieved by comparing the ratio of As(III)/As(V) in the samples and correlating it with the prevailing environmental conditions.     

Development of honey hydrogel dressing for enhanced wound healing

Radiation at 25 and 50 kGy showed no effect on the acidic pH of the local honey, Gelam, and its antimicrobial property against Staphylococcus aureus but significantly reduced the viscosity. Honey stored up to 2 years at room temperature retained all the properties studied. Radiation sterilized Gelam honey significantly stimulated the rate of burn wound healing in Sprague-Dawley rats as demonstrated by the increased rate of wound contraction and gross appearance. Gelam honey attenuates wound inflammation; and re-epithelialization was well advanced compared to the treatment using silver sulphadiazine (SSD) cream. To enhance further the use of honey in wound treatment and for easy handling, Gelam honey was incorporated into our hydrogel dressing formulation, which was then cross-linked and sterilized using electron beam at 25 kGy. Hydrogel with 6% of honey was selected based on the physical appearance.     

Challenges in validating the sterilisation dose for processed human amniotic membranes

Most of the tissue banks in the Asia Pacific region have been using ionising radiation at 25 kGy to sterilise human tissues for save clinical usage. Under tissue banking quality system, any dose employed for sterilisation has to be validated and the validation exercise has to be a part of quality document. Tissue grafts, unlike medical items, are not produced in large number per each processing batch and tissues relatively have a different microbial population. A Code of Practice established by the International Atomic Energy Agency (IAEA) in 2004 offers several validation methods using smaller number of samples compared to ISO 11137 (1995), which is meant for medical products. The methods emphasise on bioburden determination, followed by sterility test on samples after they were exposed to verification dose for attaining of sterility assurance level (SAL) of 10⁻¹. This paper describes our experience in using the IAEA Code of Practice in conducting the validation exercise for substantiating 25 kGy as sterilisation dose for both air-dried amnion and those preserved in 99% glycerol.     

Chemical, sensory and microbiological changes of gamma irradiated coconut cream powder

A study was carried out to determine optimum decontamination dose for a locally manufactured coconut cream powder. Samples were gamma irradiated (0–15 kGy) and ageing process was achieved using GEER oven at 60 °C for 7 days, which is equivalent to one-year storage at room temperature. Iodine value (IV), ranging from 4.8 to 6.4, was not affected by radiation doses and storage, however peroxide value and thiobarbituric acid (TBA) generally increased with radiation doses. In most samples, peroxide value (meq/kg) reduced after storage, whilst the TBA (mg malonaldehyde/kg), indicator for product quality, slightly increased. The sensory evaluation conducted using 25 taste panellists indicated that scores on odour, creamy taste and overall acceptance for all irradiated samples at more than 5 kGy were significantly lower (P<0.05) than the control. However, the panellists could not detect any significant differences among the irradiation doses (P>0.05). All stored products were significantly different in colour, creamy taste, odour and overall acceptance (P<0.05) when compared to the non-stored non-irradiated control. Microbiological count of the samples prior to irradiation was in the range of 1×10²–1.7×10³ cfu/g with no detection of Salmonella sp. and Escherichia coli. No microbial colonies were detected after irradiation. Based on the TBA and overall sensory acceptance, gamma irradiation of 5 kGy was found to be the optimum dose and lower doses can be considered to decontaminate coconut cream powder.     

Adsorption of some toxic elements from water samples on modified activated carbon,activated carbon and red soil using neutron activation analysis

A simple and sensitive method for the determination of some metalloids and heavy metals in water samples is presented. The method is based on the preconcentration of the attachment of chelating functionalities with metalloids and toxic metals irreversibly and targeted towards toxic metals adsorbed on modified activated carbon, activated carbon and red soil particles at pH 3.0–9.0±0.2, followed by quantitative determination using instrumental neutron activation analysis (INAA), on the absorbers. Attachment results from attraction that may be physical, chemical, electrical, or a combination of all three. The efficient removal of metalloids and toxic metals, especially arsenic, chromium and mercury is anticipated. The adsorption capacity of the chemically modified activated carbon materials was evaluated for the above mentioned metalloid and toxic metal ions in the presence of iron ions and simulated water samples. Red soil particles containing iron was utilized in the control of oxidation-reduction reaction with metalloids and toxic metals. The preconcentration of the elements of interest on red soil particles, activated carbon and modified activated carbon at different depths, pH and oxidation states was investigated. The results obtained showed good agreement with certified values giving relative errors of less than 10%.     

Effect of wafer thinning methods towards fracture strength and topography of silicon die

This paper characterizes die damage resulting from various wafer thinning processes. Die fracture strength is measured using ball breaker test with respect to die surface finish. Further study on surface roughness and topography of each surface finish is obtained by atomic force microscopy (AFM) and scanning electron microscopy (SEM) techniques. Stress relief process with 25 μm removal is able to strengthen 100 μm wafer by 20.4% using chemical wet etch and 75 μm wafer by 36.4% with plasma etch. Relatively, plasma etching shows higher fracture strength and flexibility compared to chemical wet etch. This is due to topography of the finished surface of plasma etch is smoother and rounded, leading to a reduced stress concentration, hence improved fracture strength.     

Flame Retardancy and Kinetic Behavior of Ammonium Polyphosphate–Treated Unsaturated Polyester/Phenolic Interpenetrating Polymer Network

In this study, the flammability and kinetic behavior of flame retardant unsaturated polyester (UP)/phenolic resin were investigated. The flame retardant ammonium polyphosphate (APP) was used in this research to improve the flame resistance of a UP/phenolic resin interpenetrating polymer network (IPN). The flame resistance of UP improved from none to V-0 classification by adding phenolic resin and APP. Kinetic behavior study of UP, UP/phenolic, and APP-filled UP/phenolic IPN was carried out by the Borchardt and Daniels method. The results indicated that modification of flammable UP resin markedly improved the total heat release volume of UP and the flame retardancy of the IPN network structure was also enhanced.     

Selective cytotoxicity of organotin(IV) compounds with 2,3-dihydroxybenzyldithiocarbazate Schiff bases

Research on Chemical Intermediates - A series of tridentate ONS Schiff bases were synthesised via condensation by reacting 2,3-dihydroxybenzaldehyde with S-2-methylbenzyldithiocarbazate (S2MBDTC)...     

Comprehensive Review on Application of FTIR Spectroscopy Coupled with Chemometrics for Authentication Analysis of Fats and Oils in the Food Products

Currently, the authentication analysis of edible fats and oils is an emerging issue not only by producers but also by food industries, regulators, and consumers. The adulteration of high quality and expensive edible fats and oils as well as food products containing fats and oils with lower ones are typically motivated by economic reasons. Some analytical methods have been used for authentication analysis of food products, but some of them are complex in sampling preparation and involving sophisticated instruments. Therefore, simple and reliable methods are proposed and developed for these authentication purposes. This review highlighted the comprehensive reports on the application of infrared spectroscopy combined with chemometrics for authentication of fats and oils. New findings of this review included (1) FTIR spectroscopy combined with chemometrics, which has been used to authenticate fats and oils; (2) due to as fingerprint analytical tools, FTIR spectra have emerged as the most reported analytical techniques applied for authentication analysis of fats and oils; (3) the use of chemometrics as analytical data treatment is a must to extract the information from FTIR spectra to be understandable data. Next, the combination of FTIR spectroscopy with chemometrics must be proposed, developed, and standardized for authentication and assuring the quality of fats and oils.