UV protection filters by dielectric multilayer thin films on Glass BK-7 and Infrasil 301

The increasing use of Ultraviolet (UV) light in medicine, industrial environments, for cosmetic use, and even in consumer products necessitates that greater attention be paid to the potential hazards of this type of electromagnetic radiation. To avoid any adverse effects of exposure to this type of radiation, four suitable protection filters were produced to block three UV bands (UVA, UVB, and UVC). The design structure of the required dielectric multilayer filters was done by optical thin film technology using the absorbing property of UV radiation for the substrates and dielectric materials. The computer analyses of the multilayer filter formulas were prepared using Macleod Software for the production processes. The deposition technique was achieved on optical substrates (Glass BK-7 and Infrasil 301) by dielectric material combinations including Titanium dioxide (Ti₂O₃), Hafnium dioxide (HfO₂), and Lima (mixture of oxides SiO₂/Al₂O₃); deposition being achieved using an electron beam gun. The output results of the theoretical and experimental transmittance values for spectral band from 200 nm to 800 nm were discussed in four processes. To analyze the suitability for use in ‘real world’ applications, the test pieces were subjected to the durability tests (adhesion, abrasion resistance, and humidity) according to Military Standard MIL-C-675C and MIL-C-48497A.     

Oxidations with alkaline permanganate using monovalent thallium for the back-titration: Determination of iodate,iodide and ferrocyanide

Iodate, iodide, iodine and ferrocyanide can be estimated by oxidation with KmnO₄ in alkaline media; the excess is back-titrated with TI⁷. I^- and I₂ are oxidized to IO₄^- in the presence of Ba⁺² ions but only to IO₃^- in absence of such ions. The direct titration of IO₃^-, I^- with KmnO₄ proved valueless.Ferrocyanide is oxidized by KmnO₄ in alkaline solutions and MnO₂ is formed. In the presence of telluric acid and 0.025–0.1 N NaOH satisfactory results are obtained. Reduction of MnO₄^- with ferrocyanide gives MnO₄^-2 and the results are variable, depending on the rate of adding the ferrocyanide.     

Sequency Domain Signal Processing Using Complex Hadamard Transform

Signal processing can be performed in time domain as well as intransform domain. Frequency domain is perhaps the most widely used domain for transform domain signal processing. In this paper we analyze sequency domain (SD) signal processing as an alternate to the conventional frequency domain signal processing. We perform signal processing in sequency domain using conjugate-symmetric sequency-ordered complex Hadamard transform and compare the results with those of discrete Fourier transform. We observe that in comparison with frequency spectrum, spectral energy of sequency spectrum is spread over the entire spectrum. We performed signal and image denoising in SD and found that our designed SD filters effectively denoise the signals.     

汽车安全集成

本文探讨了主动安全的特点、分类及发展动向.     

The role of hydrogen bonds in thermodynamic and structural properties in binary mixtures of morpholine + 2-methylcyclohexanol: a combined experimental and computational study

Structural Chemistry - Thermodynamic properties of binary mixtures of 2-methylcyclohexanol with morpholine are measured as a function of composition and temperature. The excess molar volumes were...     

Sodium Borohydride–Solid LiClO4: An Effective Reagent for Reducing Aldehydes and Ketones in Aprotic Solvent

An efficient and simple method for the reduction of aldehydes, ketones and acid chlorides has been accomplished by using NaBH₄–solid LiClO₄ in mild conditions at ambient temperature with complete chemoselectivity in reduction of α,β‐unsaturated aldehydes and ketones. The reaction is fast with high yield and simple workup.     

A combined experimental and computational investigation of the binary mixtures of 2-methylcyclohexanol and isobutanol

Structural Chemistry - The measured densities and viscosities of the binary mixtures of the isobutanol and 2-methylcyclohexanol were reported experimentally in a certain range of concentrations at...     

A reversed-phase high-performance liquid chromatographic method to analyze retinal isomers

A high-performance liquid chromatographic (HPLC) procedure was developed to separate all-trans-, 13-cis-, 11-cis- and 9-cis-retinal isomers. Two reversed-phase Vydac C18 columns in series were used with an isocratic solvent system of 0.1 M ammonium acetate-acetonitrile (40:60, v/v) as mobile phase and all-trans-9-(4-methoxy-2,3,6-trimethylphenyl)-3,7-dimethyl-2,4,6,8-no natetraene-1-ol (TMMP) as internal standard. Prior to HPLC, the retinal isomers were efficiently extracted in their original isomeric conformation using dichloromethane-n-hexane in the presence of formaldehyde. This technique is suitable for the assay of 11-cis- and all-trans-retinal isomers in retina.     

Control of spontaneous emission in a five-level system

We study the control of spontaneous emission in a five-level atomic system driven by four fields. We show that with the variation of dynamical variables, namely, Rabi frequencies and carrier phases of driven fields, a wide variety of the spectral behavior can be obtained, including extreme spectral narrowing. Our system can be found easily in real atoms.