Biphotonic recording effect of polarization gratings based on dye-doped liquid crystal films

This study investigates a holographic recording effect of biphotonic polarization gratings (BPGs) written on dye-doped liquid crystal (DDLC) films. One linearly polarized green light (λ_G = 514.5 nm) and a polarization-modulated interference pattern formed by two mutually coherent orthogonal (±45° with respect to the polarization of the green light) polarized red lights simultaneously excite the DDLC films to generate a BPG. The formation of BPGs depends primarily on the dichroism of the dye molecules and a sequence of mechanisms: photoisomerization, anisotropic adsorption and inhibition of dye adsorption. The cis-isomer absorbance-modulated distribution associated with the red polarization-modulation pattern induces the dye adsorption-modulated pattern, in turn, yielding the permanent BPG which generates a modulated twisted nematic (TN) structure pattern in the sample. It is found that each BPG is verified to be electrically switchable and thermally erasable. The switching time is in the order of milliseconds. Additionally, the recording time to form a BPG decreases with increasing intensity of the green pump beam.     

Solid-phase synthesis of imidazo[4,5-b]pyridin-2-ones and related urea derivatives by cyclative cleavage of a carbamate linkage

A solid-phase synthesis of substituted cyclic urea derivatives as potential heterocyclic library scaffolds is described. 2-Amino-3-nitropyridine is attached to Wang resin via a carbamate linkage. Reduction of the nitro group was achieved with SnCl(2).2H(2)O. Reductive alkylation with a range of substituted benzaldehydes followed by cyclative cleavage afforded a small library of 3-substituted imidazo[4,5-b]pyridine-2-ones in 33-45% yield and 59-88% purity. Subsequently, this methodology was applied to the synthesis of 3-substituted imidazo[4,5-f]quinolin-2-ones.     

Photochemical reaction of Rh2(CO)4(μ-TPP)(TPP=tetraphenyl-porphyrinato) with pyridine (Py) in benzene. Generation of a mononuclear rhodium(II) porphyrin radical complex Rh(TPP)(Py)

Photolytic decarbonylation of Rh₂(CO)₄(TPP) (TPP=tetraphenylporphyrinato) with pyridine (Py) in benzene gives an unusual monomeric Rh^II radical complex Rh(TPP)(Py), which has been characterised by thermal and spectroscopic measurements and by vapour pressure osmosis.     

Serendipitous synthesis of a ditwistane: a one-step access!

4-tert-Butyl-2-cyclohexen-1-one dimerizes in THF solution via its kinetic enolate, leading to di-tert-butylditwistane 8 in up to 36% yield (−78 °C → room temp., protonolysis, flash chromatography). X-ray crystallography shows that 8 incorporates one R and one S enantiomer of the starting ketone; none of the diastereomeric ditwistanes epi-8, epi’-8 or iso-8 was isolated. This means that the formation of 8 proceeds with mutual kinetic resolution and 100% induced diastereoselectivity.     

Substituted metal carbonyls XIII. Fe(CO)4(η-dppf) [where DPPF = (Ph2PC5H4)2Fe]: a convenient building block for heterometallic complexes

The potential of Fe(CO)₄(η¹-dppf) (dppf = 1,1′-bis(diphenylphosphino)ferrocene) as a precursor for heterometallic species is fully expanded in the synthesis of (OC)₄Fe(μ-dppf)Cr(CO)₅, (OC)₄Fe(μ-dppf)W(CO)₅, and (OC)₄Fe(μ-dppf)Mn₂(CO)₉, all of which have been characterized by IR, NMR (¹H and ³¹P) and elemental analyses. The low energy requirement of TMNO (Me₃NO · 2H₂O)decarbonylation allows the formation of monosubstituted Mn₂(CO)₁₀ as the major product. This aspect is further substantiated by the isolation of Mn₄(CO)₁₈(μ-dppf) in which the single bridging of a diphosphine group between two Mn₂(CO)₉ moieties is unprecedented.     

3D Printable One-Part Carbon Nanotube-Elastomer Ink for Health Monitoring Applications

3D printing of conductive elastomers is a promising route to personalized health monitoring applications due to its flexibility and biocompatibility. Here, a one-part, highly conductive, flexible, stretchable, 3D printable carbon nanotube (CNT)-silicone composite is developed and thoroughly characterized. The one-part nature of the inks: i) enables printing without prior mixing and cures under ambient conditions; ii) allows direct dispensing at ≈100 µm resolution printability on nonpolar and polar substrates; iii) forms both self-supporting and high-aspect-ratio structures, key aspects in additive biomanufacturing that eliminate the need for sacrificial layers; and iv) lends efficient, reproducible, and highly sensitive responses to various tensile and compressive stimuli. The high electrical and thermal conductivity of the CNT-silicone composite is further extended to facilitate use as a flexible and stretchable heating element, with applications in body temperature regulation, water distillation, and dual temperature sensing and Joule heating. Overall, the facile fabrication of this composite points to excellent synergy with direct ink writing and can be used to prepare patient-specific wearable electronics for motion detection and cardiac and respiratory monitoring devices and toward advanced personal health tracking and bionic skin applications.     

Ruthenium(II) complexes of monodonor ligands: efficient reagents for asymmetric ketone hydrogenation

[Chemical reaction: See text] A series of BINOL-derived ligands have been prepared and incorporated into ruthenium(II) complexes containing a diamine ligand. The complexes have proven to be excellent catalysts for the asymmetric hydrogenation of ketones, giving reduction products with enantiomeric excesses of up to 99%.     

Compositional and 2H NMR studies of bis(benzene)chromium composites of mesoporous vanadium-niobium mixed oxides

New mesoporous niobium oxides with 5, 10, and 15 mol% vanadium(V) doped into the walls of the structure were synthesized by the ligand-assisted templating method with an octadecylamine template. These materials were characterized by XRD, XPS, EPR, elemental analysis, and nitrogen adsorption before being treated with excess bis(benzene)chromium to give new composites with an organometallic phase in the walls. All materials were also characterized by EPR, XRD, nitrogen adsorption, XPS, SQUID magnetometry, and elemental analysis. The materials with higher percentages of vanadium absorbed more bis(benzene)chromium, because this process depends largely on the electron transfer between the organometallic and the walls of the mesostructure and vanadium(V) is a stronger oxidant than niobium(V). Conductivity studies on these materials revealed that the ratio of Cr(0) to Cr(l) in the pores was more important than the absolute Cr loading level in governing electron transport properties but that increasing the V content led to more insulating behavior regardless of the Cr concentration. Solid-state 2H NMR studies on perdeuteriobenzene analogues of these composites showed the presence of the neutral and cationic Cr species in different ratios depending on the loading. Tumbling of these species was also slow on the NMR time scale, indicating that the charge-carrying Cr species are not rapidly moving through the pore channels of the mesostructure. This suggests that the walls of the structure may play a key role in charge transfer in these composites, contrary to what was previously believed.     

Differentiation and quantitation of isomeric dipeptides by low-energy dissociation of copper(II)-bound complexes

Application of the kinetic method based on the dissociation of transition metal centered cluster ions is extended from chiral analysis (Tao, W. A.; Zhang, D.; Nikolaev, E. N.; Cooks, R. G. J. Am. Chem. Soc. 2000, 122, 10598) to quantitative analysis of isomeric mixtures, including those with Leu/Ile substitutions. Copper(II)-bound complexes of pairs of peptide isomers are generated by electrospray ionization mass spectrometry and the trimeric complex [CuII(ref)2(A) - H]+ (analyte A, a mixture of isomeric peptides; reference compound ref, usually a peptide) is caused to undergo collisional dissociation. Competitive loss of the neutral reference compound or the neutral analyte yields two ionic products and the ratio of rates of the two competitive dissociations, viz. the product ion branching ratio R is shown to depend strongly on the regiochemistry of the analyte in the precursor [CuII(A)(ref)2 - H]+ complex ion. Calibration curves are constructed by relating the branching ratio measured by the kinetic method, to the isomeric composition of the mixture to allow rapid quantitative isomer analysis.