Addendum to: generic rules to evaluate system-failure frequency

In the paper on Generic rules to evaluate system-failure frequency, (see ibid., vol.49, p.85-7, 2000) the authora did not consider the case of shorter mission times while presenting the rules to evaluate system-failure frequency. Time-specific failure-frequency calculations are required for the systems with shorter mission times. One of the practical uses of time-specific failure-frequency is in finding reasonably accurate estimates of failure-rate and reliability of large systems consisting of repairable components, by using combinatorial methods (without using Markov models). This paper shows that, with some minor modifications, the rules in the original paper for evaluating steady-state failure-frequency can be used to find the time-specific failure-frequency     

On the sensitivity of coupled resonator filters without some direct couplings

This paper presents an analysis of the sensitivity of coupled resonator filters in which some direct couplings are missing. The effect of changes in the coupling coefficients and resonant frequencies of the resonators is investigated by directly computing the gradient of the scattering parameters. It is shown that structures that are modular in the input-to-output direction are much less sensitive than those with modularity in the orthogonal direction for the same frequency response.     

A Novel Band-Reject Element for Pseudoelliptic Bandstop Filters

A novel band-reject element for the design of inline waveguide pseudoelliptic band-reject filters is introduced. The element consists of an offset partial-height post in a rectangular waveguide in which the dominant TE₁₀ mode is propagating. The location of the attenuation pole is primarily determined by the height of the post that generates it. The element allows the implementation of weak, as well as strong coupling coefficients that are encountered in asymmetric band-reject responses with broad stopbands. The coupling strength is controlled by the offset of the post with respect to the center of the main waveguide. The posts are separated by uniform sections of the main waveguide. An equivalent low-pass circuit based on the extracted pole technique is first used in a preliminary design. An improved equivalent low-pass circuit that includes a more accurate equivalent circuit of the band-reject element is then introduced. A synthesis method of the enhanced network is also presented. Filters based on the introduced element are designed, fabricated, and tested. Good agreement between measured and simulated results is achieved     

Towards an efficient atomic frequency comb quantum memory

We present an efficient photon-echo experiment based on atomic frequency combs [Phys. Rev. A 79 (2009) 052329]. Echoes containing an energy of up to 35% of that of the input pulse are observed in a Pr³⁺-doped Y₂SiO₅ crystal. This material allows for the precise spectral holeburning needed to make a sharp and highly absorbing comb structure. We compare our results with a simple theoretical model with satisfactory agreement. Our results show that atomic frequency combs has the potential for high-efficiency storage of single photons as required in future long-distance communication based on quantum repeaters.     

A separable method for incorporating imperfect fault-coverage intocombinatorial models

This paper presents a new method for incorporating imperfect FC (fault coverage) into a combinatorial model. Imperfect FC, the probability that a single malicious fault can thwart automatic recovery mechanisms, is important to accurate reliability assessment of fault-tolerant computer systems. Until recently, it was thought that the consideration of this probability necessitated a Markov model rather than the simpler (and usually faster) combinatorial model. SEA, the new approach, separates the modeling of FC failures into two terms that are multiplied to compute the system reliability. The first term, a simple product, represents the probability that no uncovered fault occurs. The second term comes from a combinatorial model which includes the covered faults that can lead to system failure. This second term can be computed from any common approach (e.g. fault tree, block diagram, digraph) which ignores the FC concept by slightly altering the component-failure probabilities. The result of this work is that reliability engineers can use their favorite software package (which ignores the FC concept) for computing reliability, and then adjust the input and output of that program slightly to produce a result which includes FC. This method applies to any system for which: the FC probabilities are constant and state-independent; the hazard rates are state-independent; and an FC failure leads to immediate system failure     

Statistical inference under multiterminal rate restrictions: adifferential geometric approach

A statistical inference problem for a two-terminal information source emitting mutually correlated signals X and Y is treated. Let sequences Xⁿ and Yⁿ of n independent observations be encoded independently of each other into message sets M_X and M_Y at rates R₁ and R ₂ per letter, respectively. This compression causes a loss of the statistical information available for testing hypotheses concerning X and Y. The loss of statistical information is evaluated as a function of the amounts R₁ and R ₂ of the Shannon information. A complete solution is given in the case of asymptotically complete data compression, R₁, R₂→0 as n→∞. It is shown that the differential geometry of the manifold of all probability distributions plays a fundamental role in this type of multiterminal problem connecting Shannon information and statistical information. A brief introduction to the dually coupled e-affine and m-affine connections together with e -flatness and m-flatness is given     

Synthesis of inline filters with arbitrarily placed attenuation poles by using nonresonating nodes

A general and direct synthesis technique of pseudoelliptic inline filters with arbitrarily placed attenuation poles (APs) (transmission zeros) at real frequencies is presented. The APs are brought about and independently controlled by dedicated resonators, which are coupled to nonresonating nodes. Simple rules to properly determine the phases of the reflection coefficients at the input and output are given. To reduce the effect of roundoff errors, especially for higher order filters, the extraction of the elements of the network is performed from the input and output simultaneously. Multiplicity and scaling properties of the solutions are discussed. Synthesis examples are presented to demonstrate the soundness of the procedure. Theoretical results are compared with measurement to demonstrate the validity of the presented theory.     

New dual-mode dielectric resonator filters

The paper presents a new design of dual-mode dielectric-loaded rectangular cavity filters. The response of the filter is mainly controlled by the location and orientation of the coupling apertures with no intra-cavity coupling. Each dual-mode dielectric-loaded cavity generates and controls one transmission zero which can be placed on either side of the passband. Example filters which demonstrate the soundness of the design technique are presented.     

An application of fragment interaction analysis based on local MP2

We have developed a method named ‘fragment interaction analysis based on local MP2’ (abbreviated as FILM). This method enables us to decompose the interaction energy associated with dispersion interactions into contributions of localized occupied orbitals. In this study, the basis set dependence of the results derived from FILM was examined. The results suggested that the individual ratio of pair correlation energies of selected orbital pairs to the total dispersion interaction was almost independent of the basis set size. As an illustrative example, detailed analysis was performed on the human immunodeficiency virus type 1 protease complexed with lopinavir molecule.