Vibro-acoustic response of orthogonally stiffened panels: The effects of finite dimensions

This paper investigates the effects of finite dimensions on the vibro-acoustic response of orthogonally stiffened panels. Three types of excitations are considered: acoustical excitation, point force excitation and random excitation by a turbulent boundary layer. In each case, a spatially windowed periodic model is compared with a Rayleigh-Ritz model where the modes of the un-stiffened panel are used as the basis functions. The latter model accounts for the reflected wave field generated at the boundaries by assuming that the panel is simply supported. On the contrary, the windowed periodic model only accounts for finiteness on sound radiation (the assumption of an infinite periodic structure is used to calculate the panel response). Numerical studies show that when the bending wavelength becomes comparable or smaller than the stiffener spacing, the periodic model is able to reproduce the results obtained with the Rayleigh-Ritz model. To complement the study, the developed models are compared with numerical simulations (finite element method) and with experimental results.     

Effects of anionic additives on the rheological behavior of aqueous calcium montmorillonite suspensions

Three different experimental measurements, namely, rheology, particle sizing, and x-ray diffraction (XRD), were used to study the effect of anionic additives on the properties of bentonite suspensions. The three additives were sodium carboxymethylcellulose, xanthan gum, and sodium dodecyl sulfate. Flow curves were obtained from shear stress–shear rate measurements, and the viscoelastic properties were determined from oscillatory and transient measurements. Mineralogical data were evaluated by XRD and the particle size analysis performed by light scattering technique. The presence of the surfactant modifies the face-to-face interactions and yields changes of the mixtures rheological behavior at low deformation rates. Polymers act by coating each clay particle and prevent their agglomeration. Therefore, the additives are responsible for the mechanisms of destructuration and structure reorganization as well as the mixtures viscous and viscoelastic behavior.     

Intégrales orbitales sur les algèbres de Lie réductives

Sans résuméOblatum 28-I-1992 & 13-VII-1992     

A Nitrite Electrochemical Sensor Based on Boron‐Doped Diamond Planar Electrochemical Microcells Modified with a Monolacunary Silicotungstate Polyoxoanion

A new boron doped diamond microcells (BDD) was modified, for rapid, selective and highly sensitive determination of nitrite, using a coating film of polyoxometalates (POMs), formed by cyclic voltammetry on the molecular p‐phenylenediamine (PPD) functionalized BDD. The scanning electron microscopy (SEM) technique was used to examine the morphology of (PPD/SiW₁₁) modified (BDD) electrode. It was found that (SiW₁₁) layer was uniformly formed on the electrode surface. It was observed that (BDD/PPD/SiW₁₁) showed excellent electrocatalytic activities towards nitrite ion. Under the selected conditions, the anodic peak maximum at ?0.6 V was linear versus nitrite concentration in the 40 µM–4 mM range, and the detection limit obtained was 20 µM. The newly developed electrode has been successfully applied to the determination of nitrite content in real river water samples.     

Antifungal activity and phytochemical screening of extracts from Phoenix dactylifera L. cultivars

In this study, the rachis extracts of eight date palm Phoenix dactylifera L. cultivars were analysed by phytochemical screening and bioautography on Fusarium oxysporum f. sp. albedinis (Foa). The choice of cultivars was based on their reaction to Foa (resistant, tolerant and sensitive). Phytochemical screening was realised for flavonoids, tannins, alkaloids and coumarins. Antifungal effects were mostly represented by dichloromethanic extracts (seven out of nine inhibition zones). The best results were represented by the dichloromethanic extract of the cultivar 'Bent-Cherk' rachis (6.50?±?1.41?mm) and the ethyl acetate extract of the cultivar 'Rotbi' rachis (6.00?±?1.41?mm). The date palm cultivars presented some similarities concerning phytochemical screening results related to their resistance or sensibility to Foa. From the correlation between phytochemical screening and bioautography, it was observed that the majority of bioactive compounds against Foa seem to be polyphenols. Thus, the natural defence mechanism in vivo against Foa is probably related to the action of polyphenols. The difference between resistant, tolerant and sensitive cultivars is related to their mechanism of action.     

Dynamic and acoustic response of bidirectionally stiffened plates with eccentric stiffeners subject to airborne and structure-borne excitations

An analytical method based on the modal expansion technique was developed to predict the vibro-acoustic response of both unidirectionally and bidirectionally stiffened flat panel. This paper presents the response to diffuse acoustic field (DAF) and turbulent boundary layer (TBL) excitations in terms of their joint acceptance. Numerical results for the dynamic and acoustic responses are compared with finite element method (FEM) and boundary element (BEM) results for stiffened panel with complex and eccentrically shaped stiffeners subject to point force excitation. A theoretical prediction of the transmission loss (TL) is also compared with laboratory measurements conducted on flat panels representing aircraft models as well as with hybrid statistical energy analysis (SEA)-FEM periodic model. The results confirm that the stiffened panel has the same acoustic response as the skin without stiffeners at frequencies where the structural wavelengths are equal to the spacing between the stiffeners. In addition, the transmission loss is lowered by the presence of the stiffeners at some particular region of frequencies below the critical frequency with respect to the unstiffened panel.     

Novel palladium nanoparticles supported on mesoporous natural phosphate: Catalytic ability for the preparation of aromatic hydrocarbons from natural terpenes

Various ratios of palladium nanoparticles supported on mesoporous natural phosphate (Pd@NP) were prepared using the wetness impregnation method. The prepared catalysts were characterized by IR, XRD, CV, SEM, EDX, XRF, TEM and BET analysis. The reduction and preparation of the palladium nanoparticles afford a crystallite size of 10.88 nm. The performance of the synthesized catalyst was investigated in the solvent-free dehydroaromatization of α-, β- and γ-himachalene mixture from Cedrus atlantica oil as a model substrate. In order to achieve an efficient and selective catalysis, the catalytic dehydroaromatization of various terpenes such as limonene, limonaketone, carvone, carveol and perillyl alcohol was studied. The Pd@NP catalyst performed a high catalytic activity, selectivity and recyclability in the terpenes dehydroaromatization reaction.     

Differentiation of heterocyclic regioisomers: a combined tandem mass spectrometry and computational study of N-acridin-4-ylbenzylamide and N-acridin-2-yl-benzylamide

Electrospray ionization (ESI) tandem mass spectrometry (MS/MS) has been used to differentiate two positional isomers of acridine derivatives, N-acridin-4-ylbenzylamide and N-acridin-2-ylbenzylamide. The study revealed that the isomeric ion structures produced by these heterocycles could be distinguished upon collision-induced dissociations (CID). In particular, the loss of a water molecule was shown to be a regiospecific reaction of the protonated N-acridin-4-ylbenzylamide, in which the location of the benzylamide substituent with respect to the acridinic nitrogen greatly assists proton migration by allowing the creation of intramolecular hydrogen bonds. To a lesser extent, the two isomers could also be distinguished by the difference in the abundance of the benzoyl cation in the MS/MS spectra of the [M+H]+ ions, as this ion is produced with a much higher rate from N-acridin-4-ylbenzylamide. Calculations based on quantum-mechanical models have been performed to evaluate the stability of the ion structures and to support mechanisms proposed for these two dissociation reactions.     

Electrochemical Capacitive K+ EMIS Chemical Sensor Based on the Dibromoaza[7]helicene as an Ionophore for Potassium Ions Detection

A K⁺‐sensitive capacitive electrolyte‐membrane‐insulator‐semiconductor (EMIS) based on a novel dibromoaza[7]helicene ionophore has been developed. An ion‐sensitive membrane based on polyvinylchloride (PVC) doped with the ionophore was deposited on the Si₃N₄/SiO₂/Si‐p/Cu‐Al transducer. The properties of the K⁺‐EMIS chemical sensor were investigated by electrochemical impedance spectroscopy (EIS). All the developed devices upon being tested have shown good sensitivity and linearity responses within the range 10^?6 M to 10^?1 M of potassium activity, with good selectivity over a wide variety of other cations (Na⁺, Li⁺, Cu²⁺, Ca²⁺, and Mg²⁺). To our knowledge, this is the first time that a capacitive field‐effect sensor has been fabricated using helicene as a carrier for K⁺‐detection, combined with the structure: Si₃N₄/SiO₂/Si‐p/Cu‐Al as a transducer.     

Numerical and experimental studies of molten pool formation during an interaction of a pulse laser (Nd:YAG) with a magnesium alloy

A pulse laser (Nd:YAG) interaction with an AZ91 magnesium alloy has been experimentally and numerically studied. A two-dimensional (2D) axisymmetric model of a molten pool created by a laser heat source has been developed. The elaborated model solves the coupled equations of a laminar fluid flow and heat transfer to demonstrate the flow behavior in the pool. This model takes into account the coupled effects of buoyancy and Marangoni forces, the thermophysic variation properties with temperature, and the radiation and convection heat losses. Concerning numerical results, the molten temperature distribution, velocity field and molten shape were discussed. It was noted that the Marangoni flow significantly alters the characteristics of the thawing and solidifying processes, and makes the molten pool wider and shallower. On the other hand, the experimental results showed that the material thermal properties have significant effects on the transport phenomena which takes place in the molten pool, and consequently on the formation as well as the shape of the pool. Finally, a comparison between the numerical and experimental results exhibited a good agreement.