集成运放的互阻抗放大技术应用

本文对集成运放在电子技术应用中互阻抗放大技术进行了分析讨论，给出了相应的典型应用实例，具有重要的推广应用价值。     

1-Wire单总线器件技术规范及应用研究

1-Wire单总线是一种特殊串行数据通信方式,它具有结构简单、成本低廉、节省I/O资源、便于总线扩展和维护等优点。文章介绍了1-Wire单总线器件的若干技术规范及其应用设计,给出了单总线传感器件的典型应用电路实例,并分析了1-Wire单总线器件实际应用中存在的问题。     

色散平坦光纤中的高速率PM-16QAM信号传输研究

提出了一种高速率、偏振复用、正交幅度调制信号的色散平坦光纤传输系统,传输速率分别为160 Gbps和256 Gbps,调制格式为PM-16QAM。实验研究了色散平坦光纤链路系统的传输特性,并分别与非零色散位移光纤和标准单模光纤链路传输特性做了比较。实验结果表明,较低输入光功率情况下,PM-16QAM信号在160 Gbps传输50 km时,经色散平坦光纤传输后的误差矢量幅度EVM优于经非零色散位移光纤传输情况0.5%,比特误码率BER优于非零色散位移光纤传输情况两个数量级;色散平坦光纤链路能更好地衰减旁瓣噪声;256 Gbps传输50 km和75 km时,仅在色散平坦光纤链路传输后可以较好地解调出信号;传输距离越长,保持较好特性时输入光功率范围越小。对比160 Gbps和256 Gbps情况,高速率PM-16QAM信号在色散平坦光纤链路的传输特性优于非零色散位移光纤和标准单模光纤链路的传输特性,传输速率越高、传输距离越长效果越明显。     

A novel three-ring-core few-mode fiber with large effective area and low nonlinear coefficient

A novel three-ring-core few-mode fiber with large effective area and low nonlinear coefficient is proposed in this paper. The fiber characteristics based on the full-vector finite element method (FEM) with perfect matched layer boundary conditions show that four supermodes with large effective area, low nonlinear coefficient and low differential mode group delay (DMGD) are achieved. With the increase of input wavelength, the effective areas of three-ring-core few-mode fiber are increased, and the nonlinear coefficients are decreased. The bending losses are increased with the increase of input wavelength, and are decreased with the increase of bending radius. Moreover, the proposed fiber performs a nonlinear coefficient and DMGD flattened profile at a large wavelength range.     

A dispersion flattened fiber front-haul transmission system with high bitrate signal at low input optical power

We propose a dispersion flattened fiber (DFF) front-haul transmission system with high bitrate, polarization multiplexing (PM) and quadrature amplitude modulation (QAM) signal at low input optical power. The modulation format of the system is PM-16QAM, and the bitrate is 256 Gbit/s. The transmission characteristics over DFF link system are experimentally studied, which are compared with those over non-zero dispersion shifted fiber (NZDSF) link and standard single mode fiber (SSMF) link. The experimental results show that the error vector magnitude (EVM) of 256 Gbit/s and PM-16QAM signal over 25 km DFF link is 0.75% better than that over 25 km NZDSF link at least, and the bit error rate (BER) and Q-factor are much better than those of NZDSF. Their EVM and BER are both decreased with the increase of input optical power, and the Q-factor is increased. Those characteristics over 25 km SSMF are the worst at the same case. The larger the dispersion is, the more the constellation points are deviated from their respective centers and the worse the constellation characteristics are. The greater the attenuation of the DFF is, the smaller the input power of the DFF is, the more the constellation points are deviated from their centers and the worse the constellation characteristics are. This study provides a new idea and experimental support for long span front-haul propagation in mobile communication.     

集成运放在应用中若干技术问题的讨论

对集成运放及其在电子技术应用中出现的若干问题进行了分析讨论,给出了相应的典型应用实例,具有一定的实用价值,为电路设计者提供了有益参考。     

微弱电流信号检测原理与应用实例

对微弱电流信号检测技术进行了分析讨论，并介绍了印刷电路板设计、元器件选择及安装中的几个关键问题，给出了相应的典型应用实例。     

导电油墨及其应用技术进展

印刷电子是将传统印刷工艺应用于电子产品制造的新型工艺技术,导电油墨是印刷电子关键材料之一,受到了人们的广泛关注。为了全面了解并把握导电油墨及其应用发展动态,本文结合近年来导电油墨领域文献及研究工作情况,综合分析了导电油墨的分类、构成以及其印刷工艺技术和印刷装备情况,指出导电油墨的主要发展方向在于既要开发新型功能材料（如碳纳米管、石墨烯等）在导电油墨中的应用技术,又要提高印刷成膜后导电材料间的互联性能,解决印刷电路与其它器件间的连线问题。     

亚皮秒啁啾孤子在凸形色散与线性色散平坦光纤中的传输特性比较

提出采用凸形色散平坦光纤(DFF-CVDP)传输亚皮秒啁啾孤子,利用分步傅里叶方法数值研究了亚皮秒啁啾孤子在DFF-CVDP中的传输特性,并与在线性色散平坦光纤(DFF-LDP)中的传输特性做了比较。结果表明,孤子脉冲在上述两种光纤中传输时,光纤损耗导致了孤子脉冲宽度随传输距离增加稍有展宽,脉冲方均根谱宽随传输距离增加逐渐减小。在DFF-LDP中,脉冲展宽更快,正啁啾对脉冲展宽的影响比负啁啾的影响更大,正啁啾对应的方均根光谱比其他情况下的宽得多。啁啾脉冲时域宽度随传输距离增加出现了衰减振荡,振荡周期和振幅随啁啾参量|C|的增加而增大。光孤子脉冲在两种光纤中传输时域波形保持不变,仍具有孤子特性。在DFF-LDP中,3β使得脉冲光谱红移从而诱导了脉冲时延,负啁啾减弱了3β的作用,正啁啾加强了β3的影响。在DFF-CVDP中传输可以忽略3β的影响。     

一种大有效模面积的折射率渐变型模分复用器研究

提出了一种大有效模面积的折射率渐变型分布模式 信道的新型6模式复用器,采用光束传播法和全矢 量有限元方法研究了模分复用器的性能指标。结果表明,本文复用器实现了折射率渐变型分 布、大有效模场 面积、低非线性系数、高耦合效率和宽工作波段6模式复用解复用操作;在1450650n m工作波段, 模分复用器耦合效率优于－0.449dB,模式LP₀₁ 、LP 11a、LP11b、LP_21a 和LP_21b耦合效率分别优于0、 －0.018、－0.018、－0.449和－0.036dB, 呈现出平坦特性;在C波段内,模分复用器耦合效率 呈现出更好的平坦特性,所有模式对应的平坦度均优于0.066dB;在 1550nm,所有模式的有效面积均大于标准单模光纤(SMF)的14.9倍,非线性系数均远小于标准SMF。