A method based on diffraction theory for predicting 3D focusing performance of compound refractive X-ray lenses

A method based on the diffraction theory for estimating the three-dimensional (3D) focusing performance of the compound refractive X-ray lenses is presented in this paper. As a special application, the 3D X-ray intensity distribution near the focus is derived for a plano-concave compound refractive X-ray lens. Moreover, the computer codes are developed and some results of 3D focusing performance for a compound refractive X-ray lens with Si material are shown and discussed.     

A theoretical method based on Fourier spectrum analysis for the focusing performances of the X-ray compound refractive lenses

It is important to predict the intensity distribution in focusing plane for designing the X-ray compound refractive lenses. On the basis of analyzing the structure of X-ray compound lenses and comparing it with Praunhofer diffraction system, it is concluded that the X-ray focusing system can be regarded as a kind of Praunhofer diffraction system. Therefore, a method based on Fourier spectrum analysis is presented to predict the intensity distribution in the focusing plane for the X-ray lenses. A brief analysis on the relationship between the parameters of X-ray lenses and their focusing performance is also given in this paper.     

热塑性/热固性聚合物共混体系研究——乙炔端基砜/聚砜共混物的动态固化动力学

The dynamic cure kinetics of thermosetting acetylene-terminated sulfone (ATS) and two blends prepared by the ATS and thermoplastic bisphenol A polysulfone (PSF), polyary-lethersulfone with cardo group (PES-C) were determinated by differential scanning calori-metry (DSC). The addition of polysulfone's resin increases the temperature of initial reaction and decreases the activation energy of cure reaction(E), pre-exponnential factor (LnA), and heat of cure reaction (AH). The temperature of reaction peak and final reaction and the reaction order(n) have been no effect.     

物理老化对PEK-C、PES-C及其复合材料的玻璃化转变热焓松弛特征的影响

 本文用DSC技术研究了物理老化对PEK-C、PES-C及其共混物和复合材料玻璃化转变的影响.老化时间(t)延长,玻璃化转变温度(T_g)、热焓松弛峰温(T_max)、峰高(△C_pmax)和热焓(△H)提高;△H与lgt成线性关系.碳黑或碳纤维对PES-C的物理老化行为无影响,而反应性乙炔端基砜(ATS)固化物能限制PEK-C和PES-C在T_g以下温度的物理老化过程.利用物理老化能更为方便地判断多相体系的相容性,结果表明PEK-C/PSF为相容体系,而PEK-C/PES-C相容性较差.     

填充间规聚苯乙烯的结晶

间规聚苯乙烯(sPS)性能取决于结晶行为与晶型,sPS结晶行为与形态有许多研究.本文重点综述了黏土、纳米CaCO3、滑石粉、SiO2、Mg(OH)2、TiO2,和成核剂等对sPS结晶行为、结晶形态、熔融特性与晶型的影响.认为sPS结晶行为与晶型取决于成核能垒.成核能垒低,有利于形成α-晶.熔融温度提高,提高成核能垒,有利于形成β-晶.填料加入阻碍sPS结晶成核,提高成核能垒,有利于形成β-晶.成核剂加入,降低成核能垒,有利于形成α-晶.     

一种基于Verilog HDL的OBS汇聚模块的实现方案

对光突发交换(OBS)网络的边缘节点进行了研究,给出了一种新型的OBS边缘节点汇聚模块的实现方案.与以往基于软件仿真的方法不同,该方案以FPGA芯片EP2C20Q240C8为平台,采用Verilog HDL语言编写实现.时序分析结果显示:该汇聚模块能够实现两种基本的汇聚算法(FAP和FBL),同时占用芯片资源和时延情况分析结果也能满足OBS网络的传输需求.     

爆轰测试方法基础 (一)电测技术

爆炸过程所发生的物理,化学和力学现象是十分复杂的。它可以引起物质发生变形、流动、破坏、密度突变、升温、辐射、化学反应以致陔反应等一系列现象,使物质不仅处于通常的固、液、气三种状态,而且还将涉及到等离子态和超固态。 爆炸过程的研究具有深刻的理论意义和重要的实用意义,它是多学科性的研究工作,是建立在实验基础上的应用科学。因此,开展实验工作进行特性参数的测量具有重要的意义。     

基于新型纳米传感材料的DNA生物传感器的应用

DNA是构建纳米技术和生物传感技术新设备的良好构建体.DNA生物传感器由于具有灵敏度高、选择性好等特点,近年来获得了飞速发展.研究发现,金属纳米粒子(MNPs)、碳基纳米材料等一系列纳米材料在传感器设计中提高了电化学DNA传感器的传感性能.本文侧重介绍了场效应晶体管、石墨烯、碳纳米管等新型纳米传感材料,以及基于这些材料...     

高速双边缘光纤光栅波长解调技术

提出一种双边缘结构对光纤光栅传感进行波长解调的方案,利用被测光谱通过不同光谱特性的滤波器时输出不同光强的比值确定被测光的波长.该系统在解调时不存在任何机械移动部分,比扫描式的解调方法测量速度更快,运行时更稳定、更精确.