中国散裂中子源简介

一、中子散射1932年,查德威克发现了中子,人们认识到原子核由带正电的质子和不带电的中子构成。中子的发现及应用是20世纪最重要的科技成就之一。当一束中子入射到所研究的对象上时,与研究材料中的原子核或磁矩发生相互作用,被散射出来,通过测量散射出来的中子能量和动量的变化     

MEMS热式风速风向传感器输出性能优化研究

环境测温二极管在工作时受传感器芯片热场影响,常引发MEMS热式风速风向传感器加热电压-风速曲线异常。将其更换为外置测温二极管,并调整其与传感器芯片距离,成功解决了输出曲线异常现象。并在此基础上,优化芯片及外置测温二极管的封装方案,消除了热场的相互干扰和不必要的热损耗,同时保证了外置测温二极管与空气的良好接触。风场测试结果表明,传感器的加热电压-风速曲线变得平滑,且重复性好,风速和风向的测量误差分别在±4%和±4°以内,系统的上电稳定时间大幅缩短至15 s左右。     

Introduction to the overall physics design of CSNS accelerators

The China Spallation Neutron Source (CSNS) is an accelerator-based facility. The     

基于数字化车间的加工精度自优化技术研究

介绍了低温共烧陶瓷冲孔设备传统的冲孔误差补偿方法,以及该补偿方法存在的问题;提出了一种基于低温共烧陶瓷数字化车间的冲孔误差补偿方法,论述了该补偿方式相对于传统方式在冲孔精度、设备补偿效率方面的显著优势,提出了基于数字化车间的设备加工精度误差通用的补偿流程模型,有益于该补偿方式推广应用到其他行业.     

北京散裂中子源RCS注入系统物理设计和研究

北京散裂中子源(BSNS)的主加速器——快循环同步加速器(RCS)采用H^－剥离注入方法, 将从直线加速器预加速的束流进行累积和进一步加速. 束流损失率的控制是该类高功率质子加速器所面临的关键问题之一, 而束流损失中很重要的部分是由空间电荷效应造成的. 为了减小该类束流损失, 注入系统设计中利用H^－剥离注入和相空间涂抹方法将直线加速器预加速的发射度较小的束流尽可能均匀地涂抹到较大的横向相空间中. 与其他的类似加速器相比, RCS注入系统将所有注入元件放在一个长为9m的无色散漂移节中以充分节省RCS环的纵向空间, 并使对注入系统的操作与对RCS主体的操作完全独立. 对于RCS累积的粒子数1.9×10¹³, 空间电荷效应对粒子的运动有非常重要的作用, 本文介绍了采用ORBIT程序进行三维模拟计算并进行设计优化的结果. 还介绍了系统设计时需要考虑的其他重要因素, 如质子穿越、电子收集等.     

EGSM退频影响分析及研究

随着GSM—R铁路通信系统的发展,为避免GSM系统与铁道部GSM—R系统间的干扰,EGSM退频显得尤为重要。主要介绍了增强型全球移动通信系统（EGSM）退频对无线网络质量和容量所造成的影响,并通过频率复用、跳频和分层覆盖等技术方式来提高网络性能,最后设计了一种自动分频软件,以实现频率分配的最优化,提高EGSM退频后频率分配的质量和效率,实现了EGSM的完全退频。     

Proposal for muon and white neutron sources at CSNS

The China Spallation Neutron Source （CSNS） is a large scientific facility with the main purpose of serving multidisciplinary research on material characterization using neutron scattering techniques. The accelerator system is to provide a proton beam of 120 kW with a repetition rate of 25 Hz initially （CSNSⅠ）, progressively upgradeable to 240 kW （CSNS-Ⅱ） and 500 kW （CSNS-Ⅱ＇）. In addition to serving as a driving source for the spallation target, the proton beam can be exploited for serving additional functions both in fundamental and applied research. The expanded scientific application based on pulsed muons and fast neutrons is especially attractive in the overall consideration of CSNS upgrade options. A second target station that houses a muon-generating target and a fast-neutron-generating target in tandem, intercepting and removing a small part of the proton beam for the spallation target, is proposed. The muon and white neutron sources are operated principally in parasitic mode, leaving the main part of the beam directed to the spallation target. However, it is also possible to deliver the proton beam to the second target station in a dedicated mode for some special applications. Within the dual target configuration, the thin muon target placed upstream of the fast-neutron target will consume only about 5% of the beam traversed; the majority of the beam is used for fast-neutron production. A proton beam with a beam power of about 60 kW, an energy of 1.6 GeV and a repetition rate of 12.5 Hz will make the muon source and the white neutron source very attractive to multidisciplinary researchers.     

基于薄膜动圈式的次声波监测装置设计

基于薄膜动圈式声-电转换原理,利用次声波产生的空气微压波动带动薄膜上线圈受迫振动,引起线圈内磁通量的变化产生感应电动势,将声信号转换成电信号进行采集,设计便携式次声监测装置.在模拟简谐次声环境中的测量结果表明,该装置能够准确地测量出振动频率,并对其幅度进行监测.     

ATPF—a dedicated proton therapy facility

A proton therapy facility based on a linac injector and a slow-cycling synchrotron is proposed. To obtain good treatments for different cancer types, both the spot scanning method and the double-scattering method are adopted in the facility, whereas the nozzles include both gantry and fixed beam types. The proton accelerator chain includes a synchrotron of 250 MeV in maximum energy, an injector of 7 MeV consisting of an RFQ and a DTL linac, with a repetition rate of 0.5 Hz. The slow extraction using the third-order resonance and together with the RFKO method is considered to be a good method to obtain a stable and more-or-less homogenous beam spill. To benefit the spot scanning 200 between 60 MeV and 230 MeV. A new method method, the extraction energy can be as many as about - the emittance balancing technique of using a solenoid or a quadrupole rotator is proposed to solve the problem of unequal emittance in the two transverse planes with a beam slowly extracted from a synchrotron. The facility has been designed to keep the potential to be upgraded to include the carbon therapy in the future.     

Physical design of scanning gantry for proton therapy facility

A proton therapy facility based on a linac injector and a slow cycling synchrotron is proposed. To achieve effective treatment of cancer, a scanning gantry is required. The flexible transmission of beam and high beam position accuracy are the most basic requirements for a gantry. The designed gantry optics and scanning system are presented. Great efforts are put into studying the sensitivity of the beam position in the isocenter to the element misalignments. It shows that quadrupole shift makes the largest contribution and special attention should be paid to it.