16信道0.35μmCMOS/VCSEL光发射模块

研究了垂直腔面发射激光器 (VCSEL)及其列阵器件的光谱特性、调制特性、高频特性及与微电子电路的兼容性 ,将 1× 16的VCSEL与CMOS专用集成电路进行多芯片组装 (MCM ) ,混合集成为 16信道VCSEL光发射功能模块 .测试过程中 ,功能模块的光电特性及其均匀性良好 ,测量的 - 3dB频带宽度大于 2GHz.     

10Gbit/s甚短距离传输系统接收模块研究

本文研究了符合OIF—VSR4—01．0规范的甚短距离（VSR）并行光传输系统转换器集成电路，实现了接收部分转换器集成电路中帧同步、8B／10B解码、12路通道去斜移、检错纠错等模块的设计。在Altera的Stratix GX系列的FPGA上实现了接收部分转换器集成电路。仿真分析的结果表明所设计的各个模块能正确的实现接收部分转换器集成电路的功能，给出了仿真结果。     

基于0.25μm MS/RF CMOS工艺的光电单片集成接收机设计

设计了一种单片集成的光电接收机芯片.在同一衬底上制作了基于同一工艺的光电二极管与接收机电路,以消除混合集成引入的寄生影响.这种单片集成接收机采用了先进的深亚微米MS/RF(混合信号/射频)CMOS工艺,利用这种新型工艺提供的新技术对原有光电二极管进行了改进,使其部分性能显著改善,并对整个光电集成芯片性能的提高有所帮助.     

Fabrication of 4-Inch Nano Patterned Wafer with High Uniformity by Laser Interference Lithography

We report the fabrication of 4-inch nano patterned wafer by two-beam laser interference lithography and analyze the uniformity in detail. The profile of the dots array with a period of 800 nm divided into five regions is characterized by a scanning electron microscope. The average size in each region ranges from 270 nm to 320 nm,and the deviation is almost 4%, which is approaching the applicable value of 3% in the industrial process. We simulate the two-beam laser interference lithography system with MATLAB software and then calculate the distribution of light intensity around the 4 inch area. The experimental data fit very well with the calculated results. Analysis of the experimental data and calculated data indicates that laser beam quality and space filter play important roles in achieving a periodical nanoscale pattern with high uniformity and large area. There is the potential to obtain more practical applications.     

热超声倒装焊在制作大功率GaN基LED中的应用

设计了适合于倒装的大功率GaN基LED芯片结构,在倒装基板硅片上制作了金凸点,采用热超声倒装焊接(FCB)技术将芯片倒装在基板上.测试结果表明获得的大面积金凸点连接的剪切力最高达53.93 g/bump,焊接后的GaN基绿光LED在350 mA工作电流下正向电压为3.0 V.将热超声倒装焊接技术用于制作大功率GaN基LED器件,能起到良好的机械互连和电气互连.     

利用光子晶体提高InP基LED出光效率

应用FDTD方法计算了二维无限大光子晶体的能带结构,并制备出了InP基二维平板结构的光子晶体器件.在制备过程中尝试了仅用PMMA做掩模以及PMMA和SiO2做掩模两种方法.结果表明,不使用SiO2做掩模的情况下,由于PMMA胶选择性较差,在刻蚀过程中难以保证图形的准确转移.而增加SiO2掩模后,获得了图形质量良好的光子晶体结构.成功实现了利用光子晶体结构增强LED的出光效率,与未制作光子晶体结构的LED相比,光子晶体结构LED的出光效率可在原来基础上提高1倍以上.并且随着晶格常数的增加,出光效率进一步提高.     

Growth of Semi-Insulating GaN Using N2 as Nucleation Layer Carrier Gas Combining with an Optimized Annealing Time

Semi-insulating （SI） GaN is grown using N2 as the nucleation layer （NL） carrier gas combined with an optimized annealing time by metalorganic chemical vapour deposition. Influence of using 1-12 and N2 as the NL carrier gas is investigated in our experiment. It is found that the sheet resistance of unintentionally doped GaN can be increased from 10^4 Ω/sq to 10^10 Ω/sq by changing the NL carrier gas from 1-12 to N2 while keeping the other growth parameters to be constant, however crystal quality and roughness of the tilm are degraded unambiguously. This situation can be improved by optimizing the NL annealing time. The high resistance of GaN grown on NL using N2 as the carrier gas is due to higher density of threading dislocations caused by the higher density of nucleation islands and small statistic diameter grain compared to the one using 1-12 as carrier gas. Annealing the NL for an optimized annealing time can decrease the density of threading dislocation and improve the tilm roughness and interface of AlGaN/GaN without degrading the sheet resistance of as-grown GaN signiticantly. High-quality SI GaN is grown after optimizing the annealing time, and AlGaN/GaN high electron mobility transistors are also prepared.     

用分子束外延技术在GaAs(110)衬底上生长AlGaAs材料

采用分子束外延技术在GaAs(110)衬底上制备了一系列生长温度和As2/Ga束流等效压强比不同的样品,通过室温光致发光谱、高分辨X射线衍射仪和低温光致发光谱对这些样品进行了分析,找到了在GaAs(110)衬底上生长高质量高Al组分的Al0.4Ga0.6As生长条件.     

37.5Gbit/s并行光发射模块的研制

制作并测试了12信道总传输速率为37.5Gbit/s的高速并行光发射模块,其中单信道传输速率为3.125Gbit/s.模块采用波长为850nm的垂直腔面发射激光器(VCSEL)作为光源.耦合过程采用了一种利用倒装焊设备进行激光器阵列与列阵光纤之间的无源对准耦合的方法.在单信道8mA的工作电流下,可以得到3.125Gbit/s的清晰眼图.     

AlN外延薄膜的生长和特征

文章研究了AlN薄膜的晶体质量、表面形貌、应力等性质与AlN生长工艺的依赖关系。通过对低温成核厚度、成核温度和高温生长AlN所用Ⅴ／Ⅲ比的研究，制备出了具有较好晶体质量的AlN薄膜。高分辨三晶X射线衍射给出AlN薄膜的(002)和(105)的半高宽分别为16．9arcsec和615arcsec，接近国际上报道的较好结果。原子力显微镜对表面形貌的分析表明AlN薄膜的粗糙度为5．7nm。拉曼光谱表明E2(high)模向高能方向移动，说明蓝宝石上外延的AlN薄膜处于压应变状态。光学吸收谱在204nm处具有陡峭的带边吸收，也表明了AlN外延薄膜具有较好地晶体质量。