Power distribution in Yb~(3+)-doped double-cladding fiber laser

The distribution of pump light and signal light in Yb3+-doped double-cladding fiber laser is analyzed based on a rate equation model. Numerical simulation results are obtained. The numerical solution of the rate equation is shown to be in excellent agreement with the experimental data.     

High-power and high-efficiency operation of an all-solid-state, quasi-continuous-wave, titanium sapphire laser system

High-power and high-efficiency operation of an all-solid-state, quasi-continuous-wave, titanium sapphire laser is obtained with a diode-laser-pumped frequency-doubled Nd:YAG laser as the pump source. A maximum output power of 2.5 W is obtained for 16-W power of 532-nm pump light. A much higher conversion efficiency of 15.7% is obtained when at the maximum output power.     

低掺杂浓度Nd:YVO4激光器的输出特性研究

在对Nd:YVO_4晶体的掺杂浓度和晶体长度对激光器性能的影响进行了分析后,报道了利用掺杂浓度为0.3at％,通光长度为10mm的Nd:YVO_4晶体作为增益介质,带光纤耦合的激光二极管端面抽运的Nd:YVO_4激光器。在抽运功率为27.365W时,获得了14.85W的TEM_(00)模输出,光一光转换效率为60.49％,斜效率达64.5％。     

1477 nm LD泵浦掺铒光纤放大器的研究

报道了采用１４７７ｎｍ激光二极管（ＬＤ）泵浦的掺铒光纤放大器的实验结果。研究了放大器的增益和时域特性。对１５２０ｎｍ的信号光，获得了２３ｄＢ的增益，泵浦效率为２．２８ｄＢ／ｍＷ。低频脉冲信号经过放大器后未发生波形畸变。     

我国全固态激光技术研发情况及发展趋势

1 Significance of All Solid State Laser (DPL)Technology in Field of Laser Because of the advantages of high conversion efficiency, good beam quality, small size and light weight, DPL becomes the hotspot and priority of development of laser technology. It may be the main body of laser in the future and replace gas laser and liquid laser. It is a great revolution of laser technology.     

LD端抽运平直腔Nd:YVO4固态激光器的输出功率特性研究

对LD端抽运平直腔Nd:YVO₄固态激光器输出功率特性受激光器内在诸因素(热透镜效应、腔长、激活孔径等)的制约关系进行了研究.并用传播圆-变换圆图解分析方法给出了合理的解释，同时，对进一步提高其输出功率特性指出了方向. 关键词： 固体激光器 热透镜 变换圆 平直腔     

连续运转的掺钛蓝宝石激光器

本文报导一种连续波氩离子激光泵浦的掺钛蓝宝石激光器。在氩离子激光功率(全谱线)为10.45瓦且仅用一组腔镜时,获得最大平均功率超过1000mW、调谐范围750～850nm的掺钛蓝宝石激光输出。     

稀土铽配合物的有机发光二极管

有机小分子和有机高分子的发光二极管在可见光区内有非常高的量子效率，因而受到人们的高度重视．采用二胶（TPD），8羟基喹啉铝（Alq3）等有机小分子作为空穴和电子输运层所作的发光二极管[1]的量子效率可达10％，采用聚对苯乙炔（PPV）高分子聚合物作空穴输运层，有机小分子2     

基于两种光纤介质模型的长周期光纤光栅传感特性分析

仿真分析了单轴晶体光纤的两层介质模型与三层介质模型所得纤芯模有效折射率的差别,并基于该差别对长周期光纤光栅的外界环境折射率、温度和轴向应变传感灵敏度进行了仿真分析。结果表明,对两层、三层介质模型的纤芯模,尤其对薄包层光纤有效折射率有较大差别;用两层介质模型和/或材料的折变系数计算所得的长周期光纤光栅的外界环境折射率、温度和轴向应变灵敏度有较大的误差,需应用三层介质模型以及模式的有效折变系数进行准确计算。据此计算了上述3种传感灵敏度与光纤包层半径及包层模序数的关系。为长周期光纤光栅传感器的分析设计提供了指导。     

Highly efficient terahertz generation from periodically-poled RbTiOPO4

Terahertz (THz) generation by periodically-poled RbTiOPO4 (PPRTP) with a quasi-phase-matching scheme based on cascaded difference frequency generation (DFG) processes is theoretically analyzed. The cascaded Stokes and anti-Stokes interaction processes are investigated from coupled wave equations. The THz intensities and quantum conversion efficiency are calculated. Compared with that of non-cascaded DFG processes, the THz intensity in 7-order cascaded DFG processes is increased to 2.95 times. The quantum conversion efficiency of 149.9% in cascaded processes can be realized, which exceeds the Manley-Rowe limit.