排序方式: 共有7条查询结果,搜索用时 15 毫秒
1
1.
High power laser diodes(LDs) with a lasing wavelength between 700 and 780 nm have great potential in various medical uses. Here, we report our recent efforts in developing an InGaAsP/AlGaInP-based commercial high power edge-emitting LD, which has 755 nm emission peak with a world-record continuous wave output power of 12.7 W, the highest reported so far. The lack of Al atoms in the active region significantly lowers the chance of catastrophic optical damage during high power laser operation. Meanwhile, with an accumulated 3800 h running time, our ongoing aging tests reveal excellent reliability of our devices. 相似文献
2.
3.
理论研究了平面电磁波通过n型重掺GaAs薄膜的透射谱.当GaAs薄膜两表面刻上亚波长的周期性沟槽结构时,透射谱在中红外波段出现了异常的透射增强现象.把这一现象归因于表面等离子体模式和波导模式的耦合.通过优化结构参数可以得到最大的透射效率.此外,发现随着掺杂浓度的升高,透射谱线中的透射峰逐渐向高频方向移动,最优化后透射峰值随掺杂浓度的升高而逐渐降低.这是由于掺杂浓度的改变,导致了不同的等离子体频率和电子碰撞频率,从而影响了激发模式和薄膜对电磁波的吸收.
关键词:
表面等离子体
掺杂半导体
增强透射
掺杂调制 相似文献
4.
Effective absorption enhancement in small molecule organic solar cells using trapezoid gratings 下载免费PDF全文
We demonstrate that the optical absorption is enhanced in small molecule organic solar cells by using a trapezoid grating structure. The enhanced absorption is mainly attributed to both waveguide modes and surface plasmon modes, which is simulated by using finite-difference time-domain method. The simulated results show that the surface plasmon along the semitransparent metallic Ag anode is excited by introducing the periodical trapezoid gratings, which induce the increase of high intensity field in the donor layer. Meanwhile, the waveguide modes result in a high intensity field in acceptor layer. The increase of field improves the absorption of organic solar cells significantly, which is demonstrated by simulating the electrical properties. The simulated results also show that the short-circuit current is increased by 31% in an optimized device, which is supported by the experimental measurement. Experimental result shows that the power conversion efficiency of the grating sample is increased by 7.7%. 相似文献
5.
设计并制作了波长为976nm的宽条大功率半导体激光芯片。采用非对称宽波导外延结构设计及金属有机化学气相外延技术生长了低损耗、高效率的外延材料。制备了190μm发光区宽度、4mm腔长、976nm波长的半导体激光芯片,并将其封装为COS器件。测试结果表明:封装器件在室温下的阈值电流为1.05 A,斜率效率为1.12 W/A,最高电光转换效率可达到68.5%;在40℃、19.5 W功率输出时的电光转换效率可以达到60%;9个器件在40℃和15A电流下老化4740h后,无一失效,而且老化前后的功率-电流曲线和光谱没有变化,证明该激光芯片具极高的稳定性和可靠性。 相似文献
6.
7.
本文设计并制作了一种高效率、高可靠性的915 nm半导体激光器。半导体激光器是光纤激光器的关键部件,为了最大限度地提高器件的电光转换效率,在设计上采用双非对称大光腔波导结构,同时对量子阱结构、波导结构、掺杂以及器件结构进行了系统优化。器件模拟表明,在25℃环境温度下,器件的最高电光转换效率达到67%。采用金属有机气相沉积(MOCVD)法进行材料生长,随后制备了发光区域宽度为95μm、腔长为4.8 mm的激光芯片。测试表明,封装后器件的效率以及其它参数指标达到国际先进水平,在室温下阈值电流为1 A,斜率效率为1.18 W/A,最高电光转换效率达66.5%,输出功率12 W时,电光转换效率达到64.3%,测试结果与器件理论模拟高度吻合。经过约6 000 h的寿命加速测试,器件功率没有出现衰减,表明制作的高功率915 nm激光芯片具有很高的可靠性。 相似文献
1