排序方式: 共有34条查询结果,搜索用时 296 毫秒
1.
基于相关算法的海缆埋深检测性能分析 总被引:1,自引:0,他引:1
基于信号和噪声统计不相关特性,提出了相关算法在海缆埋深检测中的新应用,并结合IIR(无限脉冲冲击响应)滤波算法进行了分析比较。当幅值为1 V的25 Hz探测信号分别受到幅值为100 V的20.15 Hz,24.45 Hz强噪声干扰时,相关算法滤波后得到的归一化幅值分别为1.185和5.870,而IIR滤波算法得到的归一化幅值为1.42和9.32。仿真结果表明,海缆探测中相关算法优于IIR滤波算法。 相似文献
2.
3.
4.
Bulk工艺气体微网探测器的研究 总被引:1,自引:0,他引:1
In this paper, we present a study of a micromegas detector prototype built with bulk technology. Following a short discussion of the micromegas detector's structure and working mechanism, the bulk fabrication process is described, and some testing results of the prototype are presented. 相似文献
5.
在气体探测器研究中,利用266 nm紫外激光的双光子电离物理机制使气体电离产生可测量的信号,是一种重要的标定方法.随着微结构气体探测器(MPGD)的不断发展,用紫外激光标定来实现较高精度位置分辨率成为了一种研究需求,对此有两个关键技术问题需要解决:实验研究激光可测信号大小以及激光指向精度.分析和模拟计算了紫外光电离信号大小和激光调光误差,基于微结构气体电子倍增器探测器与266 nm波长激光束,在工作气体Ar/CO_2(70/30)中,测量了不同光斑面积与输出信号的关系;设计和研制了紫外激光调光系统,实验测量了紫外光调光偏差.模拟结果与实验结果对比分析表明:紫外激光束作用于气体探测器,探测器增益在5000,前放增益为10 mV/fC时, 6 mm读出条宽输出信号幅度约400 mV;在探测器内传播距离为400 mm时,较短时间内(10—20 min)实验调光指向精度可以保证小于5′,引入z向偏差最大可以达到0.33 mm,对应z向漂移速度的测量相对误差为6.4×10-4.该研究为MPGD与紫外激光标定实验设计提供主要的设计参考. 相似文献
6.
In this paper, the limitations of the common method measuring intrinsic spatial resolution of the GEM imaging detector are presented. Through theoretical analysis and experimental verification, we have improved the common method to avoid these limitations. Using these improved methods, a more precise measurement of intrinsic spatial resolutions are obtained. 相似文献
7.
The design and performance of a Micromegas with a resistive anode are presented in this paper. A thin resistive sheet with volume resistivity of 1012 Ω·m cm is glued onto the readout electrode surface and its performance is investigated by using a 55Fe X-ray radioactive source in the operation gas of argon and isobutene mixtures (Ar/Iso=95/5). The gas gain at different mesh high voltage, counting rate and working time are given. Energy spectra at different working voltages are measured and the results are discussed. We have oberved that a Micromegas with a resistive anode can be operated at higer gain than a standard Micromegas without sparks. 相似文献
8.
一维位置灵敏单丝气体探测器采用单根镀金钨丝和200根阴极感应条的探测结构, X射线在阳极丝上产生的信号被多个阴极条感应, 利用重心法得到X射线的原初电离点的位置信息, 位置分辨率达到160 μm(半高全宽). 在同步辐射衍射实验中, X射线通过样品后会形成不同大小的衍射环, 本实验中测量得到11.148°和14.201°的两组衍射角位置信息; 通过平行移动一维探测器在衍射环范围内多次扫描, 可以重建得到二维衍射环. 由于一维探测器的气体厚度和入射窗宽度会给测量结果带来像差, 分析发现像差的影响大于一维探测器的位置分辨. 基于相应的物理分析对测量到的衍射位置进行修正, 修正后的衍射位置相比修正前的衍射位置的相对像差最大改善达到7%, 该方法实现了无像差二维衍射环的重建. 相似文献
9.
10.