强流RFQ的稳定性设计研究

对强流RFQ耦合间隙的确定、二极模稳定杆的设计进行了详细的研究和讨论.利用现有的RFQ冷模,进行了本征模频率的测量、场分布的调试和测量、二极模稳定杆的试验.并通过与模拟结果的比较,验证了模拟程序在RFQ腔体设计中的可靠性.同时,对影响RFQ稳定性设计的物理进行了有益的探讨.     

强流射频四极加速器输入耦合环的物理设计研究

 详细讨论了强流射频四极加速器高频输入耦合环的一些基本问题，完成了高频输入耦合环的初步物理设计. 利用二维程序Superfish 的一些结果，确定了耦合环的大小，计算了耦合环的功耗，并对构成耦合环导线的粗细进行了估算。该耦合环的物理设计可作为耦合环试验的基础，同时，也可作为三维程序HFSS 模拟计算的起点。     

测定饲料中喹乙醇含量的反相高效液相色谱法

建立了高效液相色谱法测定饲料中喹乙醇含量的方法 ;饲料用甲醇 -水提取 ,在380nm波长下检测 ,色谱柱为NOVA_PakC18(3.9mm×150mm ,4μm) ,流动相为甲醇 -水 (体积比为10∶90) ,流速为1.0mL/min ,喹乙醇质量浓度在2.5～20.0mg/L范围内与峰面积呈良好线性关系 ,相对标准偏差为1.2 %～1.6 % ,回收率为97 %～101%。     

Thermal analysis of the CSNS H－ ion source

There are two cooling systems to maintain the thermal stability of the CSNS H^- ion source during its operation： Air-cooling in the source body of the discharging chamber and water-cooling in the flange on which the discharging chamber is installed. The optimal cooling parameters to ensure the operation of the H^- ion source are determined through a thermal analysis. In addition, a transient analysis is also performed to know exactly the transient temperature variation during the whole 40 ms period of the pulsed mode operation of the ion source.     

中国散裂中子源RFQ的热分析

射频四级场(RFQ)加速器的水冷具有以下两种功用: 首先它可以把射频场发热带走, 维持RFQ腔的热稳定性及限制RFQ强体形变幅度; 其次, 当RFQ失谐时, 它还可以用来进行RFQ的调谐, 而同时又基本不影响RFQ的射频场分布. 由于RFQ粒子的传输效率对射频场的分布极其敏感, 在RFQ的运行中不再采用传统的用调谐器对RFQ进行调谐的方法. 本文通过热分析, 确定了RFQ加速器的水冷管道的数量和布局及最佳工作水温; 确定了RFQ失谐时, 如何利用水温变化来对RFQ进行调谐的方法.     

全预应力混凝土板长期挠度的计算

文本考虑了混凝士收缩、蠕变和钢筋松弛的相互影响,用拟协调元法进行预应力混凝土双向板的挠度计算,编制成电算程序,并给出了算例。     

Study on the pre-chopper in CSNS LEBT

Physical designing of the pre-chopper in CSNS LEBT is carried out, which includes the deflecting voltage, the length and the width of the deflecting plates, and the gap between the deflecting plates. The most outstanding feature of the design is that both the gap and the width vary with the beam envelope size. So both the requried deflecting voltage and the loaded capacitance are lowered. In order to avoid destruction of the space charge neutralization by the pre-chopper in the whole LEBT, an electron-trapping electrode is arranged to confine the electrostatic field of the pre-chopper to the local area. To examine the reliability of the pre-chopping design in CSNS LEBT, a similar pre-chopping design in ADS RFQ LEBT is set up and an experiment on the pre-chopper is prepared. 3-dimensional simulations are carried out to determine the loaded capacitance and the applied voltage of the electron-trapping electrode.     

Control system for the CSNS ion source test stand

A penning plasma surface H- ion source test stand for the CSNS has just been constructed at the IHEP. In order to achieve a safe and reliable system, nearly all devices of the ion source are designed to have the capability of both local and remote operation function. The control system consists of PLCs and EPICS real-time software tools separately serving device control and monitoring, PLC integration and OPI support. This paper summarizes the hardware and software implementation satisfying the requirements of the ion source control system.