排序方式: 共有16条查询结果,搜索用时 93 毫秒
1.
1030nm高重复频率纳秒脉冲全光纤放大器 总被引:1,自引:0,他引:1
采用脉冲调制的单模带尾纤输出的半导体激光器作为种子源,以掺镱光纤为增益介质,采用主振荡功率放大(MOPA)结构,实现了1030nm全光纤脉冲激光放大。脉冲重复频率在50~100kHz范围内可调,在重复频率50kHz时,实现了脉冲宽度为6.53ns,峰值功率为16.08kW的脉冲输出,相应的斜率效率为69%,输出激光的中心波长在1029.49nm。实验还研究了不同重复频率下输出激光脉冲的时域特性。该激光器的输出波长在激光雷达探测器的光谱响应范围内,可作为激光雷达发射光源。 相似文献
2.
3.
<正>A new method to obtain linear polarization operation by Brewster's angle-polished fiber end is demonstrated. By using the special polarization operation technique together with introducing a narrow-linewidth fiber grating into the laser cavity,a cladding-pumped linear polarization and single-transverse-mode (M~21.1) Yb-doped fiber laser with narrow linewidth whose full-width at half-maximm(FWHM) is less than 0.2 nm,is obtained in a simple configuration.The output power is up to 10 W which is continuouswave output at 1085 nm,and the slope efficiency is 63%with respect to the coupled pump power and 75%with respect to the absorbed pump power,respectively.The measured 21-dB polarization extinction ratio does not degrade with the output power.The simplicity of such an approach is highly beneficial for a number of applications,including the use of a fiber laser for the nonlinear wavelength conversion (especially for the intracavity frequency doubling) and for the coherent and spectral beam combination. 相似文献
4.
大模场面积光纤激光器拉锥法模式选择 总被引:3,自引:3,他引:3
大模场面积(LMA)光纤激光器的光束质量通常比单模光纤激光器的光束质量差。采用光纤拉锥的方法进行模式选择,从而提高大模场直径光纤激光器的光束质量。拉锥区距光纤激光器的输出端约5 mm,纤芯最小为9μm,约为未拉锥部分纤芯直径26μm的1/3。实验研究表明,在拉锥后,光纤激光器的光束质量因子M2由3.50减小为1.81,相应的斜率效率由63.6%减小为51.1%。虽然拉锥后最大输出功率减少了约19.8%,但其亮度增大为拉锥前的3倍。 相似文献
5.
6.
基于啁啾光纤布拉格光栅(C-FBG)与半导体可饱和吸收镜(SESAM)相结合实现了光纤掺Yb3+线型锁模激光器。采用976nm半导体激光器,以高掺杂浓度的掺Yb3+光纤作为增益介质,以SESAM作一端的反射镜,以C-FBG引入大的负色散,并作为另一端反射镜,最终获得了稳定皮秒脉冲序列的输出。其中心波长为1045nm,平均功率为12mW,基频重复频率为17.07MHz,脉宽约为3ps。详细讨论了高阶锁模光脉冲的演化方式。该锁模光纤激光器可以完全自启动,可以长时间稳定工作,有望成为高功率超短脉冲激光器的种子源。 相似文献
7.
复合金属纳米颗粒多孔硅的光学非线性特性 总被引:1,自引:1,他引:0
根据多孔硅中的量子限制效应和金属颗粒与电磁场相互作用的Mie理论及非线性光学的基本原理,提出了用于复合金属纳米颗粒多孔硅微结构的计算模型,分析了复合金属纳米颗粒多孔硅的非线性光学性质.计算了复合Ag(Au)纳米颗粒多孔硅的场增强因子,得到了在不同的金属颗粒含量时,复合体系的三阶极化率随入射光波长变化的关系,为制备具有强非线性光学效应的硅基材料及其应用提供了重要参考. 相似文献
8.
采用电化学腐蚀的方法制备多孔硅。对不同实验条件下所得到的多孔硅的拉曼光谱进行了分析,确认多孔硅是具有纳米晶结构特征的材料,肯定了量子限制效应在多孔硅光致发光中的作用。 相似文献
9.
We demonstrate a high-energy,low-repetition-rate,all-fiber,1 064-nm Yb-doped fiber laser based on the master oscillator power amplifier structure.Pulse-pumping technology is used to suppress amplified spontaneous emission.A maximum output pulse energy of 5.97 mJ is obtained at 16-ns pulses with an M2of 2.9. 相似文献
10.