GaAsN/GaAs量子阱在1 MeV电子束辐照下的退化规律

为研究GaAsN/GaAs量子阱在电子束辐照下的退化规律与机制,对GaAsN/GaAs量子阱进行了不同注量(1×10¹⁵,1×10¹⁶ e/cm²)1 MeV电子束辐照和辐照后不同温度退火(650,750,850℃)试验,并结合Mulassis仿真和GaAs能带模型图对其分析讨论。结果表明,随着电子注量的增加,GaAsN/GaAs量子阱光学性能急剧降低,注量为1×10¹⁵ e/cm²和1×10¹⁶ e/cm²的电子束辐照后,GaAsN/GaAs量子阱PL强度分别衰减为初始值的85%和29%。GaAsN/GaAs量子阱电子辐照后650℃退火5 min,样品PL强度恢复到初始值,材料带隙没有发生变化。GaAsN/GaAs量子阱辐照后750℃和850℃各退火5 min后,样品PL强度随退火温度的升高不断减小,同时N原子外扩散使得样品带隙发生约4 nm蓝移。退火温度升高没有造成带隙更大的蓝移,这是由于进一步的温度升高产生了新的N—As间隙缺陷...     

利用分子束外延生长高质量应变平衡InAs/InAsSbⅡ类超晶格

利用分子束外延技术在GaSb衬底上生长了高质量的InAs/InAsSb（无Ga）Ⅱ类超晶格。超晶格的结构由100个周期组成,每个周期分别是3.8 nm厚的InAs层和1.4 nm厚的InAs_0.66Sb_0.34层。在实验过程中出现了一种特殊的尖峰状缺陷。利用高分辨率x射线衍射（HRXRD）、原子力显微镜（AFM）和傅里叶变换红外光谱（FTIR）对外延的超晶格进行了表征和分析。结果表明,优化后的样品几乎为零晶格失配,超晶格0级峰半峰宽为39.3 arcsec,表面均方根粗糙度在10 μm×10 μm范围内达到1.72 ?。红外吸收光谱显示50%的截止波长为4.28 μm,PL谱显示InAs/InAs_0.66Sb_0.34超晶格4.58 μm处有清晰锐利的发光峰。这些结果表明,外延生长的InAs/InAsSb超晶格稳定性和重复性良好,值得进一步的研究。     

Growth of high quality InSb thin films on GaAs substrates by molecular beam epitaxy method with AlInSb/GaSb as compound buffer layers

A series of In Sb thin films were grown on Ga As substrates by molecular beam epitaxy(MBE).Ga Sb/Al In Sb is used as a compound buffer layer to release the strain caused by the lattice mismatch between the substrate and the epitaxial layer,so as to reduce the system defects.At the same time,the influence of different interface structures of Al In Sb on the surface morphology of buffer layer is explored.The propagation mechanism of defects with the growth of buffer layer is compared and analyzed.The relationship between the quality of In Sb thin films and the structure of buffer layer is summarized.Finally,the growth of high quality In Sb thin films is realized.