Enhancement of 2.0 µm fluorescence emission in new Ho3+/Tm3+/Yb3+ tri-doped tellurite glasses

For enhancing the 2.0 µm band fluorescence of Ho3+, a certain amount of WO3 oxide was introduced into Ho3+/Tm3+/Yb3+ tri-doped tellurite glass prepared using melt-quenching technique. The prepared tri-doped tellurite glass was characterized by the absorption spectra, fluorescence emission and Raman scattering spectra, together with the stimulated absorption, emission cross-sections and gain coefficient. The research results show that the introduction of WO3 oxide can further improve the 2.0 µm band fluorescence emission through the enhanced phonon-assisted energy transfers between Ho3+/Tm3+/Yb3+ ions under the excitation of 980 nm laser diode (LD). Meanwhile, the maximum gain coefficient of Ho3+ at 2.0 µm band reaches about 2.36 cm-1. An intense 2.0 µm fluorescence emission can be realized .     

Enhancement of fluorescence emission and signal gain at 1.53 µm in Er3+/Ce3+ co-doped tellurite glass fiber

Er3+/Ce3+ co-doped tellurite glasses with composition of TeO2-GeO2-Li2O-Nb2O5 were prepared using conventional melt-quenching technique for potential applications in Er3+-doped fiber amplifier (EDFA). The absorption spectra, up-conversion spectra and 1.53 µm band fluorescence spectra of glass samples were measured. It is shown that the 1.53 µm band fluorescence emission intensity of Er3+-doped tellurite glass fiber is improved obviously with the introduction of an appropriate amount of Ce3+, which is attributed to the energy transfer (ET) from Er3+ to Ce3+. Meanwhile, the 1.53 µm band optical signal amplification is simulated based on the rate and power propagation equations, and an increment in signal gain of about 2.4 dB at 1 532 nm in the Er3+/Ce3+ co-doped tellurite glass fiber is found. The maximum signal gain reaches 29.3 dB on a 50 cm-long fiber pumped at 980 nm with power of 100 mW. The results indicate that the prepared Er3+/Ce3+ co-doped tellurite glass is a good gain medium applied for 1.53 µm broadband and high-gain EDFA.     

Performance of Er3+-doped chalcogenide glass MOF amplifier applied for 1.53 μm band

A model of Er3＋-doped chalcogenide glass （GasGe20Sb10S65） microstructured optical fiber （MOF） amplifier under the excitation of 980 nm is presented to demonstrate the feasibility of it applied for 1.53 μm band optical communications. By solving the Er3＋ population rate equations and light power propagation equations, the amplifying performance of 1.53 μm band signals for Er3＋-doped chalcogenide glass MOF amplifier is investigated theoretically. The results show that the Er6＋-doped chalcogenide glass MOF exhibits a high signal gain and broad gain spectrum, and its maximum gain for small-signal input （-40 dBm） exceeds 22 dB on the 300 cm MOF under the excitation of 200 mW pump power Moreover, the relations of 1.53 μm signal gain with fiber length, input signal power and pump power are analyzed. The results indicate that the Er3＋-doped Ga5Ge20Sb10S65 MOF is a promising gain medium which can be applied to broadband amplifiers operating in the third communication window.