排序方式: 共有48条查询结果,搜索用时 16 毫秒
1.
2.
Bismuth oxychloride(Bi OCl) with morphology of squared-like nanosheet is synthesized by solvothermal method using ethylene glycol aqueous reaction solution. The product is characterized by X-ray powder diffraction(XRD), scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS), transmission electron microscopy(TEM) and ultraviolet-visible(UV-Vis) diffuse reflection spectroscopy, respectively. The layered structure, the hydrogen bonding between hydroxyl groups and their selective adsorption cause the formation of the squared-like nanosheets. The photocatalytic degradation activity of the as-prepared Bi OCl is tested by the degradation of methyl orange under UV light irradiation. Repeating the degradation process four times under the same condition, the results show that the squared-like Bi OCl nanosheets present high photocatalytic activity and stability. 相似文献
3.
Pulsed electrodeposited technique is applied to fabricate ZnTe nanowire arrays with different diameters into the anodic alumina membrane in citric acid solution. The x-ray powder diffraction, scanning electron microscopy and transmission electron microscopy indicate that the high ordered, uniform and single-crystalline nanowires have been fabricated. The optical absorption spectra of the nanowire array show that the optical absorption band edge of the ZnTe nanowire array exhibit a blue shift compared with that of bulk ZnTe, and the nonlinear current-voltage characteristic is observed. 相似文献
4.
在绿色信贷支持下,车企面临着如何获取动力电池才能更好发挥绿色金融促进新能源汽车研发创新的问题。本文分别在无竞争及引入竞争情形时构建了车企采取不同动力电池获取模式下的供应链博弈模型,从供应链角度揭示了积分市场对新能源汽车发展的作用机制,并在补贴退坡、积分售价偏低等情形下对电池获取方式的选择给出了建议。研究结果表明:绿色信贷支持不仅能提高研发主体研发投入,增强不同模式创新效应,而且能够有效缓解补贴退坡及积分售价偏低带来的负效应;竞争使得创新效应及供应链收益均有显著增长;无竞争时的单一入股策略、竞争时的外购策略不仅可以最大化自身收益,还可以有效应对新能源汽车补贴退坡和积分售价偏低等现状。 相似文献
5.
采用甲基丙烯酸二甲氨基乙酯的溴代丁烷季铵盐和硅烷偶联剂KH570的共聚物作为感湿聚合物,并向该聚合物中掺杂LiCl、CaCl2、FeCl33种不同的盐类,制备了高分子电阻型湿敏元件,系统研究了聚合物浓度、无机盐的种类和浓度对元件湿敏性能的影响。结果表明,在33%~95%RH湿度范围内,元件显示出较高的灵敏度(b为-0.043 8~-0.038 8)和较好的线性(R为-0.994 8~-0.981 6),且阻抗随聚合物浓度的增加而下降,但响应变慢;掺杂LiCl和CaCl2可使元件阻抗变小,掺杂FeCl3却使元件阻抗增大;在1×10-2mol/L的最佳LiCl掺杂浓度下,元件具有最好的灵敏度(b=-0.044 6)和最短的脱湿时间(20 s)。 相似文献
6.
化学沉积Ni-P-Al2O3和Ni-P-SiC复合材料的微观组织与物理性能 总被引:3,自引:0,他引:3
采用化学沉积方法,可以制备以镍磷合金为基质的复合硬质相粒子的复合材料[1].镍磷合金颇受青睐之处在于可以调整成分和时效处理温度来改变其组织结构,进而获得广泛变化的性能[2,3].本文报道化学沉积获得的NiP氧化铝和NiP碳化硅复合材料的微观组织与... 相似文献
7.
8.
通过在氧化还原稳定的钙钛矿材料钛铌酸盐的B位晶格中掺杂具有氧化还原活性的锰元素提高固体氧化物电解池复合电极电催化性能.研究发现,锰元素成功取代钛铌酸盐B位的Ti/Nb.掺杂后的样品的离子电导率在800℃下的氧化气氛和还原气氛下的离子电导率分别提高了约1和0.5个数量级.基于掺杂后的钛铌酸盐基复合阴极,氧离子传导型固体氧化物电解池电解水蒸汽的电流效率在有和无还原气体保护下分别提高了25%和30%. 相似文献
9.
10.