Effect of molecular weight and film thickness on the crystallization and microphase separation in polystyrene-<Emphasis Type="Italic">block</Emphasis>-poly(L-lactic acid) thin films at the early stage

We investigated the effects of molecular weight and film thickness on the crystallization and microphase separation in semicrystalline block copolymer polystyrene-block-poly(L-lactic acid) (PS-b-PLLA) thin films, at the early stage of film evolution (when T _g < T < T _ODT) by in situ hot stage atomic force microscopy. For PS-b-PLLA 1 copolymer which had lower molecular weight and higher PLLA fraction, diffusion-controlled break-out crystallization started easily. For PS-b-PLLA 2 with higher molecular weight, crystallization in nanometer scales occurs in local area. After melting of the two copolymer films, islands were observed at the film surface: PS-b-PLLA 1 film was in a disordered phase mixed state while PS-b-PLLA 2 film formed phase-separated lamellar structure paralleling to the substrate. Crystallization-melting and van der Waals forces drove the island formation in PS-b-PLLA 1 film. Film thickness affected the crystallization rate. Crystals grew very slowly in much thinner film of PS-b-PLLA 1 and remained almost unchanged at long time annealing. The incompatibility between PS and PLLA blocks drove the film fluctuation which subsequently evolved into spinodal-like morphology.     

喷墨打印聚合物薄膜均匀性调控研究进展

聚合物发光显示材料具有发光颜色在全可见光区可调、可溶液简单加工及适用于柔性大面积基底的特点,成为目前研究的热点。 在聚合物发光薄膜图案化技术中,喷墨打印因为具有加工过程简单高效、适用于溶液方式加工、柔性的加工过程等特点而被认为是最具有应用潜力的技术。 高质量聚合物薄膜的制备是高精度发光显示器件制作的关键,但喷墨打印液滴在干燥过程中通常伴随着“咖啡环”现象,造成薄膜不均匀沉积。 因此,消除“咖啡环”现象,实现聚合物薄膜的均匀沉积,是喷墨打印高性能器件的重要研究方向。 本文主要论述了“咖啡环”效应的产生机理,如何抑制喷墨打印聚合物薄膜加工过程中的“咖啡环”效应,最终实现聚合物薄膜均匀性调控。     

交错并联PFC变换器的预测控制研究

针对交错并联图腾柱PFC拓扑在电感电流连续导电模式CCM(Continue Conduction Mode)下,占空比预测控制中系统存在二次谐波以及特定次谐波的问题,设计对特定频率谐波有良好跟踪特性的PR控制器,补偿占空比预测控制的谐波分量。同时,在电压外环中设计陷波器,对特定次谐波进行滤波和反馈补偿。仿真实验结果证明,基于PR控制器与陷波器的占空比预测控制系统,在保留了系统快速动态性的基础上,输入电流很好的得到滤波,电流的THD(Total Harmonic Distortion)值明显减小,谐波含量降低,提高了输入电能的质量,实现PFC功能。     

双刚性共轭嵌段共聚物体系的自组装

棒杆-棒杆(rod-rod)共轭嵌段共聚物体系是近几年发展起来的一类新型共轭聚合物材料,由于其特有的电学活性以及通过自组装实现纳米尺度结构可控等特性正逐渐成为人们研究的热点.构筑单元的刚性棒状结构使得rod-rod共轭嵌段共聚物体系倾向于自组装形成囊泡或层状结构等低曲率聚集体.本文总结了近年来关于rod-rod共轭嵌段共聚物体系自组装行为的研究,分别介绍了溶液中以及薄膜状态下双刚性共轭嵌段共聚物体系的自组装行为,在此基础上进一步讨论了rod-rod共轭嵌段共聚物薄膜结构与性能的关系.