基于AlxNy绝缘介质膜的新型窗口大功率半导体激光器

提升半导体激光器的腔面抗光学灾变(COD)损伤的能力,改善半导体激光器的工作特性,一直是大功率半导体激光器器件工艺研究的难点.基于薄膜应力使基底半导体材料带隙变化的原理,采用直流磁控溅射方法在不同条件下溅射生成不同内应力的AlxNy绝缘介质膜.通过研究大功率半导体激光器腔面退化机理,借助AlxNy等应力膜设计制作了一种新型非吸收透明窗口结构的宽条形半导体激光器,使器件平均最大输出功率提高46.5%,垂直发散角达到21°,水平发散角达到6.1°,2000 h加速老化试验,其千小时退化速率小于0.091%.     

直流磁控溅射制备a-Si:H膜工艺及其在激光器腔面膜上的应用

利用直流(DC)磁控溅射方法制备氢化非晶硅(a-Si∶H)薄膜。研究了氢气流量、溅射源功率对膜的沉积速率、氢含量(CH)以及光学性能的影响。通过傅里叶变换红外(FTIR)吸收光谱计算氢含量,其最大原子数分数为11%。用椭偏仪测量了膜的折射率n和消光系数k,发现a-Si∶H薄膜的k值和n值都随CH的增加而减小。将优化的实验结果用于半导体激光器腔面高反镜的镀制,a-Si∶H薄膜在808 nm波长处的n和k分别为3.2和8×10-3,获得了良好的激光输出特性。     

ZnSe多晶化学机械抛光研究

本文针对ZnSe多晶的性能,在试验的基础上,研究出一套实用的、行之有效的ZnSe多晶加工工艺,并重点讨论了化学机械抛光工艺.同时对加工后零件的工艺参数、表面质量及透过率的测试,结果表明所采用的化学机械加工法可取得非常好的抛光效果.     

Structural, Optical and Electrical Properties of Hydrogen-Doped Amorphous GaAs Thin Films

Amorphous CaAs films are deposited on substrates of quartz glass and sificon by rf magnetron sputtering technique in different gas ambient. First, the amorphous structure of the prepared samples is identified by x-ray diffraction. Second, analysis by radial distribution function and pair correlation function method is established to characterize the microstructure of the samples. Then, the content and bond type of hydrogen are analysed using Fourier transform infrared absorption spectroscopy. It is found that the bonded hydrogen content increases with increasing partial pressure PH of H2. However, the hydrogen content saturates at PH 〉 1 × 10^-1 Pa. Hydrogen addition shills the optical absorption edge to higher energy, decreases the dark conductivity and improves the photo-sensitivity. The optical gap, dark conductivity and photo-sensitivity of the films are dependent on the bonded hydrogen content. These results demonstrate that hydrogen has obvious passivation effects on rf sputtered amorphous GaAs thin films.     

ZnSe红外窗口材料的性能及其制备

ZnSe是一种优秀的红外窗口材料,得到广泛的关注.在本文叙述了ZnSe红外窗口材料的光学特性和力学特性,以及详细地描述ZnSe体单晶熔体法、气相法、溶液法和固相再结晶制备技术及其影响因素.     

多种含硫溶液钝化(100)GaAs表面的实验研究

为实现GaAs表面的钝化,以Na2S、(NH4)2S、CH3CSNH2为主要研究对象,通过对比实验研究得出较为理想的湿法钝化液。通过光致发光(PL)谱研究了(NH4)2S 叔丁醇、CH3CSNH2 NH4OH、CH3CSNH2 叔丁醇三种不同含硫溶液钝化(100)GaAs表面后的发光特性。PL谱测试发现,(NH4)2S 叔丁醇饱和溶液处理过的(100)GaAs表面光致发光强度最强,PL谱的相对发光强度是未做钝化处理的10倍左右。因此得出(NH4)2S 叔丁醇饱和溶液是较为理想的(100)GaAs表面钝化液。     

ZnSe窗口10.6 μm红外增透膜的研究

设计了ZnSe材料为基底10．6μm红外增透膜。低折射率膜材为BaF2,高折射率膜材为ZnS,计算出它们各自的光学厚度。对ZnSe零件镀膜后的透过率和牢固性等性能测试表明,其光学性能和牢固性皆优。     

Study on hydrogen sulfide 790-nm laser diode plasma passivation of cavity surface

In order to improve the optical properties of the Ⅲ-Ⅴ laser diodes （LDs） by means of H2S plasma passivation technology, H2S plasma passivation treatment is performed on the GaAs（110） surface. The optimum passivation conditions obtained are 60-W radio frequency （RF） power and 20-min duration. So the laser cavity surfaces are treated under the optimum passivation conditions. Consequently, compared with unpassivated lasers with only AR/HR-eoatings, the catastrophic optical damage （COD） threshold value of the passivated lasers by H2S plasma treatment is increased by 33%, which is almost the same as that of （NH4）2Sx treatment. And the life-test experiment has demonstrated that this passivation method is more stable than （NH4）2Sx solution wet-passivated treatment.     

硫化的激光器腔面上溅射ZnS钝化膜的研究

提出了一种新的激光器腔面钝化方法.先用(NH4)2S溶液硫化解理后的激光器腔面,然后使用磁控溅射方法对激光器的前腔面镀ZnS钝化膜、后腔面镀Si/SiO2高反射膜.ZnS钝化层光学厚度为λ/4,在中心波长为808 nm处透过率可达95.5%.钝化前激光器的光学灾变损伤(COD)阈值为1.6 W,钝化后为2.0 W,提高了25%倍;未镀膜的激光器阈值电流为0.25 A,经硫化再镀ZnS后阈值电流为0.20 A,降低了20%.实验结果表明,经硫化后溅射ZnS对激光器腔面具有良好的钝化和增透效果.