Biosorption of Chromium(III) by Biomass of Seaweed Sargassum sp. in a Fixed-Bed Column

This work aimed at modeling chromium biosorption using the biomass of seaweed Sargassum sp. in a fixed-bed column. The mathematical model used was obtained from the mass balance of the component in the liquid phase and in the biosorbent material. The effects of both axial dispersion in the column and the resistance to mass transfer in the solid were considered for the solution of the partial differential equations of the model, using the Galerkin method on finite elements. To represent the equilibrium data of the batch system the Langmuir isotherm were used. The chromium ion adsorption capacity of the seaweed Sargassum sp., at a temperature of 30°C and pH 3.5, was 2.61 mmol/g. The model performance was evaluated from experimental data obtained at 30°C for flow rates of 2, 6 and 8 mL/min. The parameters of the model, mass transfer and axial dispersion coefficients, were adjusted from these experimental data. The model proved adequate to describe chromium biosorption dynamics in fixed-bed columns.     

From dilute to dense self-avoiding walks on hypercubic lattices

A field-theoretic representation is presented to count the number of configurations of a single self-avoiding walk on a hypercubic lattice ind dimensions with periodic boundary conditions. We evaluate the connectivity constant as a function of the fractionf of sites occupied by the polymer chain. The meanfield approximation is exact in the limit of infinite dimensions, and corrections to it in powers ofd ^–1 can be systematically evaluated. The connectivity constant and the site entropy calculated throughout second order compare well with known results in two and three dimensions. We also find that the entropy per site develops a maximum atf1–(2d)^–1. Ford=2 (d=3), this maximum occurs atf~0.80 (f~0.86) and its value is about 50% (30%) higher than the entropy per site of a Hamiltonian walk (f=1).     

Determination of selenoamino acids by gas chromatography-mass spectrometry

The application of the recently introduced ethylchloroformate derivatization method for the separation and determination of selenomethionine and selenocystein in selenium-enriched yeast and yeast-free tablets by means of a gas chromatography-mass spectrometry (GC-MS) system has been studied. The efficiency of three methods for the extraction of selenomethionine from the tablets were compared. Total selenium content of the same tablets were measured using inductively coupled plasma (ICP)-MS and it was found that in the selenized yeast tablets about 80% of the total selenium is present as selenomethionine. The results were in agreement with the values in the labels and with the literature. The accuracy of the total selenium analysis was controlled by the analysis of a reference material.     

Enthalpic determinations of aliphatic ester-solvent systems with correlations

Calorimetric measurements were carried out on ester-solvent systems where the esters were H(CH₂)_xCOO(CH₂)_yH, with x and y varying from 1 to 5, and the solvents were n-hexane and 1,2-dichloroethane. Calculation of the enthalpies of cavity formation enabled the enthalpies of interaction to be determined. Both enthalpies correlated with number of carbon atoms N, equal to x+y in the esters, giving for 1,2-dichloroethane

Amperometric detection of nitrite and nitrate at tetraruthenated porphyrin-modified electrodes in a continuous-flow assembly

The modification of a glassy carbon surface by coating with an electrostatically assembled film of tetraruthenated cobalt porphyrin/(meso-tetra(4-sulphonatephenyl)porphyrinate zinc(II) yields an indicator electrode that allows the determination of nitrite to be performed with a limit of detection of 0.1 μM in a flow injection configuration. The dynamic range extends up to 1000 μM and the repeatability of the measurements was evaluated to be 1.5% with a throughput of 50 samples per hour. The efficiency of the bilayered film to mediate the electron transfer allows the determinations to be performed at a less positive potential (+0.75 V) with enhanced sensitivity. The coating also prevents the surface poisoning and its stability is maintained over several weeks. The same detector was used for determination of nitrate after reduction to nitrite in a reductor column containing copperised cadmium. This method was used for the determination of nitrate and nitrite in mineral water, saliva and cured meats, the results being in agreement with certified values and those obtained by using recommended procedures.     

Simultaneous determination of copper and lead in ethanol fuel by anodic stripping voltammetry

The presence of trace metals in car fuels plays an important role in the engine maintenance. In addition, these metals contribute for the environmental contamination in big cities and their control is necessary. Square Wave Stripping Voltammetry (SWSV) is a very sensitive technique for elemental trace determination and was applied for ethanol fuel analysis. The first studies were done searching for the best conditions for copper determination in alcoholic medium, utilizing gold electrodes. During these studies, the possibility of the simultaneous determination of copper and lead in the same experiment was observed. Two procedures for the analysis of these metals were adopted: The direct quantification of metals in alcohol–water mixtures and a second way that involves the evaporation of the organic solvent and re-suspension of the ions with water+electrolyte. Good recovery values were obtained for synthetic samples spiked with known amounts of metals. The results obtained for the two methods were in good agreement. The detection limits for copper and lead in 75% ethanol–water ratio solution were calculated as 120 and 235 ng l⁻¹, respectively, for 15-min deposition time.     

Synthesis, crystal structure, spectroscopic and electrochemical characterization of the dinuclear complex {tetra-μ-[(±)-2-(p-methoxyphenoxy)-propionato-O,O′]bis(aqua)dicopper(II)}

Structural, electrochemical and spectroscopic data of a new dinuclear copper(II) complex with (±)-2-(p-methoxyphenoxy)propionic acid are reported. The complex {tetra-μ-[(±)-2-(p-methoxyphenoxy)propionato-O,O′]-bis(aqua)dicopper(II)} crystallizes in the monoclinic system, space group P2₁/n with a = 14.149(1) ?, b = 7.495(1) ?, c = 19.827(1) ?, β = 90.62(1) and Z = 4. X-ray diffraction data show that the two copper(II) ions are held together through four carboxylate bridges, coordinated as equatorial ligands in square pyramidal geometry. The coordination sphere around each copper ion is completed by two water molecules as axial ligands. Thermogravimetric data are consistent with such results. The ligand has an “L” type shape due to the angle formed by the β-carbon of the propionic chain and the linked p-methoxyphenoxy group. This conformation contributes to the occurrence of a peculiar structure of the complex. The complex retains its dinuclear nature when dissolved in acetonitrile, but it decomposes into the corresponding mononuclear species if dissolved in ethanol, according to the EPR measurements. Further, cyclic voltammograms of the complex in acetonitrile show that the dinuclear species maintains the same structure, in agreement with the EPR data in this solvent. The voltammogram shows two irreversible reduction waves at E _pc = −0.73 and −1.04 V vs. Ag/AgCl assigned to the Cu(II)/Cu(I) and Cu(I)/Cu° redox couples, respectively, and two successive oxidation waves at E _pa =− 0.01 and +1.41 V vs. Ag/AgCl, assigned to the Cu°/Cu(I) and Cu(I)/Cu(II) redox couples, respectively, in addition to the oxidation waves of the carboxylate ligand.     

Bia-amperometric quantification of salbutamol in pharmaceutical products

This paper presents a simple, rapid and reproducible method of analysis of salbutamol in pharmaceutical products, utilizing batch injection analysis (BIA) associated with amperometric detection. A study of salbutamol oxidation demonstrated a strong dependence between electrode fouling and pH. All determinations were done utilizing a glassy carbon electrode in presence of 3.0 mol l⁻¹ NaOH. A large linear dynamic range from 8×10⁻⁷ to 2×10⁻⁴ mol l⁻¹ was obtained by using an injected volume of 100 μl with a detection limit of 2.5×10⁻⁷ mol l⁻¹. R.S.D. of 0.92% for 50 successive injections of 4×10⁻⁶ mol l⁻¹ of salbutamol and a sample throughput of 60 samples per hour were achieved. The method was applied for salbutamol quantification in syrups.     

Periodic solutions of a nonlinear propagation equation via a fixed point argument

In this work the initial value problem for the equation $$u_t + \beta u_x + yf(u)_x - \delta u_{xxt} = g,\forall x \in R, \forall t \in [0,T],$$ with periodic boundary conditions is interpreted in the sense of periodic distributions and studied via fixed point arguments. Weak solutions exist iff∈C ⁰ (R) andg∈L ^∞(L ²(0,1)). Moreover, regularity inf, g and the initial data implies regularity of solutions.     

Morphological and structural characteristics of diazo dyes at the air-water interface: in situ Brewster angle microscopy and polarized UV/vis analysis

A morphological analysis is presented for Langmuir films of the diazo dyes Sudan 4 (S4), Sudan 3 (S3), and Sudan red (SR), using Brewster angle microscopy. Stable nonmonomolecular structures are formed at the air-water interface denoted as a plateau in the pressure-area isotherms. Monolayer domains are evident by the contrastless image even before the pressure onset, which grow in size until it reached a condensed monolayer. This behavior resembles that of Langmuir films from simple aromatic fatty acids. Films from all the azo dyes display similar features, according to the surface potential isotherms and in situ polarized UV/vis spectroscopy except for the larger area per molecule occupied by S4 and SR. This is attributed to the presence of CH(3) groups that cause steric hindrance modifying the organization of diazo dye molecules at the air-water interface. UV/vis polarized absorption spectroscopy showed preferential orientation of S4 and S3 on the water surface, while SR molecules lie isotropically. For these three diazo dyes, film absorption was negligible at very large areas per molecule, becoming nonzero only at a critical area coinciding with the onset of surface potential. The critical area is ascribed to the formation of a H-bonded network between water molecules and diazo dye headgroups.