Synthesis,proton NMR stereochemical study and diels-alder reaction of (E)-7-arylidene-2H,6H-naphtho[1,8-bc]furan-2,6-diones

7-Arylidene-2H,6H-naphtho[1,8-bc]furan-2,6-diones 3 were prepared by a retro-Diels-Alder reaction of the corresponding dihydro 1,3-oxazines 2 or in a one pot synthesis from 6-hydroxy-2H-naphtho[1,8-bc]furan-2-one 1 . Their E configuration was established from the chemical shift's values of the vinylic proton and by ¹H nmr NOE difference spectroscopy. Cycloadditions of 3b upon styrene or stilbene were catalyzed by boron trifluoride etherate. The cycloadducts were obtained with the relative trans configuration.     

Comparative study of catalytic activity of Pd loaded hydroxyapatite and fluoroapatite in butan-2-ol conversion and methane oxidation

Palladium loaded calcium-hydroxyapatite, Pd(z)/CaHAp, and calcium-fluoroapatite, Pd(z)/CaFAp, were synthesised and characterised by TEM, XRD, IR and UV–vis–NIR spectroscopies. Introduction of palladium does not change the structure of CaHAp and CaFAp. The average size of PdO particles was found to be around 4–5 nm on Pd(1)/CaHAp but larger (6–7 nm) on Pd(1)/CaFap. The acid–base properties of the supports and of the catalysts were studied using butan-2-ol conversion. On CaHAp and CaFAp, the butenes yield (dehydration reaction) is very low either in the absence or in the presence of oxygen. The methyl ethyl ketone yield (dehydrogenation reaction) is significant only in the presence of oxygen and higher over CaFAp. Conversely, the performances of Pd(z)/CaHAp are better than those of Pd(z)/CaFAp below 180 °C. Above 180 °C, buta-2-ol combustion is favoured on Pd/CaHAp but not on Pd/CaFAp.

In methane oxidation, Pd(z)/CaHAp showed also a much larger activity than Pd(z)/CaFAp. On 2 wt% Pd loaded CaHAp, the methane oxidation reaches a conversion of almost 100% at 350 °C, which is comparable with the performance of conventional Pd/Al₂O₃ catalysts. The reducibility of PdO under methane–oxygen mixtures is lower on Pd(z)/CaHAp. For both reactions, the lower activity of Pd(z)/CaFAp is related to its higher acidity, resulting from the substitution of OH⁻ by F⁻, and to the larger PdO particle size.     

Crystal Structures of 1,3-Calix[4]-bis-crown-6·3CH3CN and 1,3-Calix[4]-bis-(benzo-crown-6)·3 CH3CN

The crystal structures of a new solvate of the ditopic receptor 1,3-calix[4]-bis-crown-6, Bis-C6, and of 1,3-calix[4]-bis-(benzo-crown-6), Bis-benzoC6, are reported. Bis-C6.3 CH3CN (1) crystallizes in the monoclinic space group P21/n, a = 14.388(3), b = 26.947(8), c = 14.707(4) Å, = 113.19(3)°, V = 5241(5) Å3, Z = 4. Refinement led to a final conventional R value of 0.092 for 2723 reflections. The structure of (1) differs from the previously reported structure of Bis-C6.4 CH3CN by the conformation of one crown either chain. Two acetonitrile molecules are in the close neighbourhood of the crown ether cavities. Bis-benzoC6.3 CH3CN (2) crystallizes in the monoclinic space group P21/c, a = 10.391(4), b = 17.264(11), c = 30.426(9) Å, = 94.62(3)°, V = 5440(7) Å3, Z = 4. Refinement led to a final conventional R value of 0.106 for 2965 reflections. Two acetonitrile molecules are located near the crown ether cavities, as in (1). One of the crown ether conformations is the same as in the binuclear caesium complex of Bis-benzoC6, supporting the hypothesis of a preorganization of this ligand towards the complexation of this ion; the second crown ether chain is partially disordered.     

Synthesis and complexing properties of a double-calix[4]arene crown ether

The template synthesis of copper(II) phthalocyanine by the condensation of dicyanobenzene within the supercages of Cu(II) exchanged X and Y type zeolites was studied using differential scanning calorimetry. The exotherms for intrazeolite and surface complexation have been resolved. These thermal events exhibit a dependence on the copper loading and hydration level which has been interpreted as a pressure effect.     

Investigation of U(VI) extraction with calixarene: Application to analysis of urine sample

A macrocyclic molecule, the calix[6]arene 4₆, functionalized with carboxy groups, has been studied and its extraction efficiency towards uranium determined in a two phases solvent-extraction system. Two solvents, dichloromethane and benzene were used to follow uranium extraction from media containing sodium ions. The study of the extraction parameters allowed proposing an extraction scheme with each solvent. The extraction efficiency was found to increase with pH, with an optimal efficiency of nearly 100%. No decrease of uranium extraction was observed in synthetic solutions containing sodium ions (spiked with²²Na) and/or²³⁹Pu. Under specific conditions, almost 100% of uranium have been extracted by the calixarene from real urine samples.     

Crystal and molecular structures of binuclear caesium complexes with 1,3-calix[4]-bis-crown-6 and 1,3-calix[4]-bis-benzo-crown-6

The crystal structures of two binuclear complexes between caesium and 1,3-calix[4]-bis-crowns have been determined. Cs₂ Bis-benzoC6(NO₃)₂. 3CHCl₃ (1) in whichBis-benzoC6 is 1,3-calix[4]-bis-benzo-crown-6, crystallizes in the orthorhombic system: space groupPca2 ₁ a=19.513(10),b=15.382(5),c=23.708(9) Å,V=7116(5) ų,Z=4. Refinement led to a final conventionalR value of 0.065 for 2321 reflections. The structure of (1) is analogous to those already reported withBis-C6, (in whichBis-C6 is, 1,3-calix[4]-bis-crown-6) and NO ₃ ^– as a counter-ion. Cs₂ Bis-C6(NCS)₂ (2) crystallizes in the monoclinic system: space, groupC2 a=36.57(2),b=11.47(1),c=13.65(1) Å, =109.03(5)°.,V=5415(6) ų,Z=4. Refinement led to a final conventionalR value of 0.063 for 2227 reflections. Compound (2) is made of dimers bridged by a disordered NCS^– ion. The crown ether chain conformations are discussed. Supplementary data relating to this article (atomic coordinates, anisotropic displacement parameters, bond distances and angles and observed and calculated structure factors) are deposited with the British Library as Supplementary Publication No. SUP 82199 (52 pages).     

Effect of alkali ions (Na+, K+) on the solvent extraction of uranium(VI) with a di-carboxylated calix[4] arene

The solvent extraction of uranium(VI) with a di-carboxylated calix[4]arne (LH₂) in chloroform and 1,2-dichloroethane has been studied in the presence or absence of alkali ions (M=Na⁺,K⁺). For UO ₂ ²⁺ when studied alone, a 12 (metal: ligand) extracted species is evidenced, with a rather low associated extraction equilibrium constant. The efficiency of extraction increases drastically in the presence of alkali ions, due to the formation of heteronuclear complexes. In all cases, the extracted species are found to be both 122 and 112 (UO ₂ ²⁺ MLH₂) mixed complexes, except in chloroform with K⁺, where only the latter is formed. In the case of Na⁺, mass spectrometry spectra confirm the existence of both homo and heteronuclear complexes as determined in the extraction studies.     

Synthesis of tripodal aza crown ether calix[4]arenes and their supramolecular chemistry with transition-, alkali metal ions and anions

Tripodal aza crown ether calix[4]arenes, 5a, 5b, 6a and 6b, have been synthesized. The structure of protonated 5a was elucidated by X-ray crystallography to be a self-threaded rotaxane. Complexation studies of 5a and 5b towards anions using Na⁺ as countercation were carried out by ¹H NMR titration in dimethylsulfoxide-d₆ and the mixture of chloroform-d and methanol-d₄, respectively. Ligands 5a and 5b were able to form 1:1 complexes with Br⁻, I⁻ and NO₃⁻ and the complexation stability varied as follows: NO₃⁻>I⁻>Br⁻. The effect of countercation on anion complexation was also investigated. The results showed that the association constants of 5a towards Br⁻ in the presence of various cations varied as K⁺>Bu₄N⁺>Na⁺. The enhancement in anion complexation ability of 5a may result from the rearrangement of the tripodal ammonium unit in the presence of K⁺. The neutral forms, 6a and 6b, were able to form complexes with transition metal ions such as Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺. The stability of the complexes followed the sequence: Ni²⁺2+Cu²⁺Zn²⁺. Compounds 6a and 6b may, therefore, potentially be used as either transition metal ion or anion receptors that can be controlled by pH of the solution.