The kinetics of the light-induced defect creation in hydrogenated amorphous silicon – Stretched exponential relaxation

Our model for light-induced defect creation in hydrogenated amorphous silicon is applied to its kinetics, i.e., the growing curve of light-induced dangling bond density as a function of illumination time, which is fitted to a stretched exponential function. Two parameters β and τ involved in the function are estimated as functions of saturated dangling bond density in terms of our model. These are compared with two experimental results, i.e., our results obtained from ESR measurements and Shimakawa et al.’s results obtained from photoconductivity measurements. The saturated dangling bond density is also measured as a function of the generation rate of free carriers. The experimental results are compared with calculated results and discussed.     

Catalytic property of Europium supported on alumina from its ammoniacal solution

Europium supported on alumina (Eu/Al₂O₃) was prepared by impregnation from an ammoniacal solution of the metal. The catalytic activity of Eu/Al₂O₃ for the isomerization of 2,3-dimethylbut-1-ene to 2,3-dimethylbut-2-ene was examined. Eu/Al₂O₃ showed the highest catalytic activity for the isomerization when heated under a vacuum at 523 K, the yield of 2,3-dimethylbut-2-ene in 20 min being 81.6% at 314 K. IR spectrum shows the presence of two kinds of Eu amides. The change of the IR spectra and the catalytic activities with evacuation temperature suggest that only one of the two Eu amides is catalytically active for this base-catalyzed isomerization.     

Cobalt-Catalyzed Intramolecular Hydroacylation Involving Cyclopropane Cleavage

A simple cobalt-diphosphine catalyst has been found to efficiently promote intramolecular cyclization of ortho-cyclopropylvinyl- and cyclopropylidenemethyl-substituted benzaldehydes into benzocyclooctadienone and benzocycloheptadienone derivatives, respectively. This ring-opening hydroacylation likely involves aldehyde C−H oxidative addition, olefin insertion, cyclopropane cleavage by β-carbon elimination, and C−C bond-forming reductive elimination, as was supported by mechanistic experiments and DFT calculations.     

7,7,8,8‐Tetraaryl‐o‐quinodimethane Stabilized by Dibenzo Annulation: A Helical π‐Electron System That Exhibits Electrochromic and Unique Chiroptical Properties

When two benzene rings are fused to a tetraaryl‐o‐quinodimethane skeleton, sterically hindered helical molecules 1 acquire a high thermodynamic stability. Because the tetraarylbutadiene subunit contains electron‐donating alkoxy groups, 1 undergo reversible two‐electron oxidation to 2 ²⁺, which can be isolated as deeply colored stable salts. Intramolecular transfer of the point chirality (e.g., sec‐butyl) on the aryl groups to helicity induces a diastereomeric preference in dications 2 b ²⁺ and 2 c ²⁺, which represents an efficient method for enhancing circular‐dichroism signals. Thus, those redox pairs can serve as new electrochiroptical response systems. X‐ray analysis of dication 2 ²⁺ revealed π–π stacking interaction of the diarylmethylium moieties, which is also present in solution. The stacking geometry is the key contributor to the chirosolvatochromic response.     

Chiral Palladacycle Catalysts Generated on a Single‐Handed Helical Polymer Skeleton for Asymmetric Arylative Ring Opening of 1,4‐Epoxy‐1,4‐dihydronaphthalene

Post‐polymerization C? H activation of poly(quinoxaline‐2,3‐diyl)‐based helically chiral phosphine ligands (PQXphos) with palladium(II) acetate afforded chiral phosphapalladacycles quantitatively. In situ generated palladacycles exhibited enantioselectivities up to 94 % ee in the palladium‐catalyzed asymmetric ring‐opening arylation of 1,4‐epoxy‐1,4‐dihydronaphthalenes with arylboronic acids.     

Catalytic Hydroetherification of Unactivated Alkenes Enabled by Proton‐Coupled Electron Transfer

We report a catalytic, light‐driven method for the intramolecular hydroetherification of unactivated alkenols to furnish cyclic ether products. These reactions occur under visible‐light irradiation in the presence of an Ir^III‐based photoredox catalyst, a Brønsted base catalyst, and a hydrogen‐atom transfer (HAT) co‐catalyst. Reactive alkoxy radicals are proposed as key intermediates, generated by direct homolytic activation of alcohol O?H bonds through a proton‐coupled electron‐transfer mechanism. This method exhibits a broad substrate scope and high functional‐group tolerance, and it accommodates a diverse range of alkene substitution patterns. Results demonstrating the extension of this catalytic system to carboetherification reactions are also presented.     

Aggregation states and surface wettability in films of poly(styrene-block-2-perfluorooctyl ethyl acrylate) diblock copolymers synthesized by atom transfer radical polymerization

Well-defined poly(styrene-block-2-perfluorooctyl ethyl acrylate) [P(St-b-PFA)] copolymers with various chemical compositions were synthesized by atom transfer radical polymerization. Films of P(St-b-PFA) were structurally characterized, from bulk to surface, on the basis of transmittance electron microscopic observation and small-angle X-ray scattering, X-ray photoelectron spectroscopic, and contact angle measurements. For a comparison, poly(styrene-random-2-perfluorooctyl ethyl acrylate) [P(St-ran-PFA)] copolymers were also synthesized by conventional free radical polymerization. While P(St-b-PFA) with the 2-perfluorooctyl ethyl acrylate (PFA) content higher than 18.7 mol % formed a typical phase-separated cylinder structure, P(St-b-PFA) with a lower PFA content and P(St-ran-PFA) were in a miscible state. Since the perfluoroalkyl groups possess extremely low surface energy, they were preferentially segregated at the film surface, resulting in the formation of the PFA surface layer. This was the case for all P(St-b-PFA) films examined, although the aggregation state at the surface was strongly dependent on the PFA content. In the case of the P(St-b-PFA) with the PFA content higher than 18.7 mol %, both advancing and receding contact angles for water were 120 degrees and even larger with almost no hysteresis. In addition, extremely excellent oil-repellent surface properties such as advancing and receding contact angles for dodecane of 76 degrees and 75 degrees were also observed. However, these intriguing liquid-repellent properties were not observed for the films of miscible P(St-b-PFA) and P(St-ran-PFA). Therefore, it can be concluded that the internal structure beneath the surface as well as the surface itself should be deeply considered to design excellent and stable liquid-repellent materials.     

Controlled polymerization of epoxides: Metal‐free ring‐opening polymerization of glycidyl phenyl ether initiated by tetra‐n‐butylammonium fluoride in the presence of protic compounds

Metal‐free controlled ring‐opening polymerization of glycidyl phenyl ether (GPE) was achieved using tetra‐n‐butylammonium fluoride (Bu₄NF) as an initiator in the presence of water and ethanol as chain transfer agents (CTAs). Number‐averaged molecular weight of poly(GPE) increased with an increase of [GPE]₀/([Bu₄NF]₀ + [CTA]₀) values, showing relatively narrow molecular weight distributions. NMR spectroscopic analysis exhibited a formation of ethoxy groups as well as FCH₂ at the initiating polymer chain‐end when ethanol was used as the CTA in the polymerization. These results indicate that Bu₄NF acts as a catalyst as well as the initiator for this polymerization system. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Mössbauer spectroscopic study of photo-sensitive organic–inorganic hybrid system, (SP)[Fe(II)Fe(III)(dto)3](dto = C2O2S2, SP = spiropyran)

A photo-sensitive organic–inorganic hybrid system (SP)[Fe^IIFe^III(dto)₃] (SP = spiropyran, dto = C₂O₂S₂), has recently been developed, where the photo-isomerization of the intercalated spiropyran in solid state triggers the change of the magnetic properties, including the ferromagnetic transition temperature from 5 to 22 K. We performed ⁵⁷Fe Mössbauer measurement in order to probe the microscopic states of iron ions in (SP)[Fe^IIFe^III(dto)₃] and have investigated the photo-induced effect on them. The sample without UV-irradiation shows the charge transfer phase transition between 200 and 70 K and the higher and lower temperature phases coexist below 70 K, whereas the UV-irradiated sample does not undergo the charge transfer phase transition and the higher temperature phase is stable between 200 and 6 K.