Effect of Ru crystal orientation on the adhesion characteristics of Cu for ultra-large scale integration interconnects

The adhesion of Cu on Ru substrates with different crystal orientations was evaluated. The crystal orientation of sputter deposited Ru could be changed from (1 0 0) to (0 0 1) by annealing at 650 °C for 20 min. The adhesion of Cu was evaluated by the degree of Cu agglomeration on Ru. Cu films on annealed Ru films with the (0 0 1) crystal orientation showed 28% lower RMS values and 50% lower Ru surface coverage than Cu as-deposited on Ru having the (1 0 0) crystal orientation after annealing at 550 °C for 30 min, which suggest that Cu wettability on the Ru(0 0 1) was better than that on the Ru(1 0 0) plane. The low lattice misfit of 4% between Cu(1 1 1) and Ru(0 0 1) may be the reason for this good adhesion property.     

A construction of spherical 2-design

It is determined for which values ofn andd spherical 2-designs ofn points exist in ^d . And an explicit construction is given when they exist.     

Adsorption Behavior of Amino Acids on a Stainless Steel Surface

The adsorption behavior of various amino acids on a stainless steel surface was investigated at 30 degrees C and over a pH range of 3-10. Acidic and basic amino acids except histidine adsorbed remarkably at pH 3-4 and 7-10, respectively, and showed Langmuir-type adsorption isotherms. The effects of pH and ionic strength on the adsorption isotherms were investigated to analyze the interactions between amino acids and adsorption sites on the stainless steel. Hydrophobic amino acids and glycine showed only small adsorbed amounts at all pHs tested. For the acidic and basic amino acids, reversibility of the absorption and the influence of the ionic strength on the adsorption behavior were examined. The adsorption isotherms of the derivatives of aspartic acid were also measured in order to examine the contribution of the carboxylic groups of acidic amino acids to the adsorption. Furthermore, a Fourier-transform infrared spectroscopic analysis and semiempirical molecular orbital calculation were carried out to analyze the ionization states and the configuration of the amino acids adsorbed on a stainless steel surface. These investigations suggest that the acidic and basic amino acids adsorb through two electrostatic interactions of two ionized groups in the amino acid with a stainless steel surface. Copyright 2000 Academic Press.     

Fluorometric Determination of Trace Amounts of Fluoride Ion Using an Expanded Porphyrin

A highly selective and sensitive method of fluorometry is described for determination of the fluoride ion at the parts per billion level via the ion-pair complex formation of the fluoride ion with an expanded prophyrin [2,23-diethyl-8,17-bis(2-ethoxycarbonylethyl)-3,7,12,13,18,22-hexamethylsapphyrin (H₃sap)]. The ion-pair complex gives out an enhanced fluorescence intensity at 680 nm on excitation at 450 nm. Since the present method is based on a direct reaction of the fluoride ion with the sappyrin, a 200-fold amount of the aluminum (III) ion [10⁻⁴M (M = mol dm⁻³)] and a 2000-fold amount of the iron(III) ion (10⁻³M) over the fluoride ion did not interfere with determination of the fluoride ion at concentrations as low as 5 × 10⁻⁷M in the presence of 1,2-diaminocyclohexane-N,N,N′,N′-teraacetic acid. The proposed method was applied to determination of the fluoride ion in various water samples (tap water, river water, rain water, underground water, and hot spring water) and satisfactory results were obtained.     

C3 cyclopolymerization. I. Is the cyclopolymerization of 1,3-bis(p-vinylphenyl)-propane by means of radical or anionic initiators possible?

Polymerization of 1,3-bis(p-vinylphenyl) propane (St-C₃-St) was investigated by using radical and anionic initiators. Radical polymerization yielded linear polymer with pendant styryl groups in pertinent conditions without gelation. Anionic polymerization with n-butyllithium and sodium naphthalene produced insoluble polymers that, according to infrared (IR) spectroscopy, had no cyclized units. On the other hand, phenylmagnesium bromide gave soluble polymer in HMPA-benzene mixed solvent. Zero-valent nickel catalyst also gave soluble polymer. The soluble polymers could be analyzed by several spectroscopies, and it was confirmed that those obtained by anionic and coordination polymerization had no [3.3]paracyclophane units in the main chain. From these results it was concluded that cationic propagation could be assumed if the polymer Of St-C₃-St contained [3.3]paracyclophane units in the main chain.     

Structures of Ganoderic Acid A and B,Two New Lanostane Type Bitter Triterpenes from Ganoderma lucidum (FR.) KARST.

The structures of two new bitter triterpenes, ganoderic acid A and B. isolated from a mushroom Ganoderma lucidum (FR.) Karst. (Polyporaceae) were determined as 1 and 2 on the basis of spectral data. Ganoderic acid A is a novel highly oxidized triterpene bearing a boat-shaped A-ring of lanostane.     

Characterization of the non-stoichiometric and isomorphic hydration and solvation in FK041 clathrate

FK041 crystallizes as a non-stoichiometric hydrate or as solvated hydrates which were characterized as isomorphic clathrates by powder X-ray diffractometry. Moisture and organic solvent vapor sorption studies, differential scanning calorimetry and thermogravimetric analysis revealed that FK041 monohydrate forms a physically stable host crystal, which has lattice channels for guest water and/or organic solvent molecules. The hydration state varies non-stoichiometrically between dihydrate and tetrahydrate depending on the relative humidity and the mol content of the co-existing organic solvent, that is 2-propanol, ethanol, or acetone. These organic solvents are thought to replace a part of originally present water with a mol ratio of 1:3. 2-Propanol exhibited the most stable solvation, indicating that the size and shape of 2-propanol are the most preferable to the lattice channels.     

Palladium-catalyzed reaction of allyl carbamates; allylation of carbonucleophiles,and protection-deprotection of amines

Allylation of carbonucleophiles with allylic carbamates under neutral conditions has been studied. The C-allylation of carbonucleophile is competitive with the N-allylation of amines, and the structure of amines is crucial for the selectivity. Bulky secondary amines gave the best results. Also a new method of protection-deprotection of amines as carbamates has been developed. Smooth deprotection is possible by the palladium-catalyzed reaction of allyl carbamates with formic acid. This method is particulary useful for primary amines, including optically active amino acids.