Collection of iron(III) from homogeneous aqueous solutions on membrane filters using Chromazurol B with Triton X-100.

A membrane filtration method was examined concerning the effective collection of iron(III) from a homogeneous aqueous solution with Chromazurol B (CAB), one of the triphenylmethane dyes, as a precipitating reagent in the presence of a non-ionic surfactant, polyethylene glycol mono[4-(1,1,3,3-tetramethylbutyl)phenyl]ether (Triton X-100). A formed blue Fe(III)-CAB complex was collected as a precipitate on a membrane filter by filtration under suction from a homogeneous aqueous solution in the pH range over about 2. The original solution was prepared at a concentration ratio of CAB to Fe(III) of to 10, and that of Triton X-100 to CAB of 10 to 100. It was then adjusted to a pH value of between 1.0 and 6.5. A linear relationship (r = 0.999) was obtained between the initial concentration and the found one of Fe(III) in the range of 2.0 x 10(-5) to 4.0 x 10(-4) mol dm(-3) at a fixed concentration ratio of CAB to Fe(III) of 3 and that of Triton X-100 to CAB of 20. This membrane filtration with CAB and Triton X-100 may be utilized for the separation of Fe(III) as a background species.     

Argon sorption and partial molar volume in poly(ethyl methacrylate) above and below the glass transition temperature

Sorption and dilation isotherms for argon in poly(ethyl methacrylate) (PEMA) are reported for pressures up to 50 atm over the temperature range 5–85°C. At temperatures below the glass transition (T_g=61°C), sorption isotherms are well described by the dual-mode sorption model; and isotherms above T_g follow Henry's law. However, isotherms for dilation due to sorption are linear in pressure at all temperatures over the range investigated. Partial molar volumes of Ar in PEMA are obtained from these isotherms. The volumes are approximately constant above T_g (about 40 cm³/mol), whereas the volumes below T_g are smaller and dependent on both temperature and concentration (19–26 cm³/mol). By analyzing the experimental data according to the dual-mode sorption and dilation model, the volume occupied by a dissolved Ar molecule and the mean size of microvoid in the glass are estimated to be 67 129 ų, respectively. The cohesive energy density of the polymer is also estimated as 61 cal/cm³ from the temperature dependence of the dual-mode parameters.     

Approximate controllability for trajectories of semilinear control systems

We treat an abstract semilinear control system and study the controllability problem for its trajectories. Assuming a range condition of the control action operator and an inequality condition on the system parameters, we can show that the reachable trajectory set of the semilinear system is equivalent to that of its corresponding linear system.The author wishes to express his deep appreciation to Prof. T. I. Seidman for his many helpful suggestions and to Prof. W. Takahashi for many stimulating conversations.     

Weak noncovalent Si···F?C interactions stabilized fluoroalkylated rod-like polysilanes as ultrasensitive chemosensors

Noncovalent interactions, such as hydrogen bonding, metal coordination, and π-π stacking, are increasingly being utilized to develop well-ordered and self-organized supramolecular materials. Recently, new types of nonclassical weak interactions, such as C H···π, C H···F C, and C H···O, have been exploited in stabilizing the specific conformations of molecules and molecular assemblies in the solid state. These noncovalent interactions play an important role in materials comprised of polymer chains, because cooperative effects from a large number of weak interactions can lead to drastic changes in its conformation, several properties, and functionalities. The programmed design of synthetic helical polymer with well-defined molecular conformation has been the main subject in modern polymer science and engineering. Silicon-catenated polysilane is an ideal helical silicon quantum wire and polymers with unique photophysical properties. The present review highlights the spectroscopic evidences for through-space weak Si···F C interaction in poly(methyl-3,3,3-trifluoropropylsilane) ( 1 ) in noncoordinating and coordinating solvents by means of NMR (²⁹Si and ¹⁹F) and IR spectroscopies, and viscometric measurement. It was found that 1 is applicable for chemosensors with an extremely high sensitivity and selectivity toward fluoride ions in tetrahydrofuran (THF) and with high sensitivity for nitroaromatic compounds, detected by a decrease in the photoluminescence intensity in THF and in thin solid film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5060–5075, 2006     

Control of the bioluminescence starting time by inoculated cell density.

In this study, we attempted to control the timing of light-emission from bioluminescent bacteria, by changed cell numbers inoculated into medium. Luminous bacteria express bioluminescence when the number of cells reached a threshold. Inoculated cell density had an effect on the time of bioluminescence starting. Samples were prepared by varying cell density of inoculation. In the results, all the vials showed different luminescence profiles in the order of inoculated cell population.     

A novel technique for detecting single nucleotide polymorphisms by analyzing consumed allele-specific primers

We present a simple and rapid polymerase chain reaction (PCR)-based technique, termed consumed allele-specific primer analysis (CASPA), as a new strategy for single nucleotide polymorphism (SNP) analysis. The method involves the use of labeled allele-specific primers, differing in length, with several noncomplementary nucleotides added in the 5'-terminal region. After PCR amplification, the amounts of the remaining primers not incorporated into the PCR products are determined. Thus, nucleotide substitutions are identified by measuring the consumption of primers. In this study, the CASPA method was successfully applied to ABO genotyping. In the present method, the allele-specific primer only anneals with the target polymorphic site on the DNA, so it is not necessary to analyze the PCR products. Therefore, this method is only little affected by modification of the PCR products. The CASPA method is expected to be a useful tool for typing of SNPs.     

High-performance liquid chromatography of apolipoproteins in serum high-density lipoproteins

A simple and rapid method for apolipoprotein analysis in serum high-density lipoproteins (HDL) has been developed using high-performance liquid chromatography (HPLC) with sodium phosphate buffer (pH 7.0) containing 0.1% sodium dodecyl sulphate (SDS) as eluent. In contrast to the use of urea solution as an eluent, apolipoproteins can be analysed by applying an incubation mixture of HDL and the eluent buffer. A TSK-GEL column of G3000SW was found to be more profitable than G2000SW or G4000SW for analysis of HDL apolipoproteins. Elution patterns monitored by absorbance at 280 nm using a G3000SW column can give precise quantitative as well as qualitative information about apolipoproteins of molecular weight between 10(4) and 10(5). HPLC patterns of HDL apolipoproteins were compared between individual human subjects with various diseases. Elution profiles for lipid components in an incubation mixture were also examined.     

Regioselectivity in palladium-indium iodide-mediated allylation reaction of glyoxylic oxime ether and N-sulfonylimine

Allylation reaction of electron-deficient imines with allylic alcohol derivatives in the presence of a catalytic amount of palladium(0) complex and indium(I) iodide was studied. The reversibility of allylation was observed in the reaction of glyoxylic oxime ether having camphorsultam. As the important effect of water on regioselectivity, the gamma-adducts were kinetically formed from monosubstituted allylic reagents in the presence of water. The selective formation of thermodynamically stable alpha-adducts was observed in anhydrous THF. In contrast, the allylation of N-sulfonylimine gave the gamma-adducts with high regioselectivities even under anhydrous reaction conditions.     

Elucidation of solid-state complexation in ground mixtures of cholic acid and guest compounds

The solid-state complexation between cholic acid (CA) and either methyl p-hydroxybenzoate (MPB) or ibuprofen (IBP) was investigated. Powder X-ray diffractometry, IR spectroscopy and thermal analysis suggested the complex formation between CA and MPB as well as between CA and IBP by co-grinding method. The stoichiometry of CA-MPB was 1 : 1 while that of CA-IBP was 2 : 1, reflecting the effect of guest size on complex formation. The guest compounds were assumed to be included in the channel of complexes formed by hydrogen bonds among CA molecules.