Polypyrrole Shell@3D‐Ni Metal Core Structured Electrodes for High‐Performance Supercapacitors

Three‐dimensional (3D) nanometal films serving as current collectors have attracted much interest recently owing to their promising application in high‐performance supercapacitors. In the process of the electrochemical reaction, the 3D structure can provide a short diffusion path for fast ion transport, and the highly conductive nanometal may serve as a backbone for facile electron transfer. In this work, a novel polypyrrole (PPy) shell@3D‐Ni‐core composite is developed to enhance the electrochemical performance of conventional PPy. With the introduction of a Ni metal core, the as‐prepared material exhibits a high specific capacitance (726 F g^?1 at a charge/discharge rate of 1 A g^?1), good rate capability (a decay of 33 % in C_sp with charge/discharge rates increasing from 1 to 20 A g^?1), and high cycle stability (only a small decrease of 4.2 % in C_sp after 1000 cycles at a scan rate of 100 mV s^?1). Furthermore, an aqueous symmetric supercapacitor device is fabricated by using the as‐prepared composite as electrodes; the device demonstrates a high energy density (≈21.2 Wh kg^?1) and superior long‐term cycle ability (only 4.4 % and 18.6 % loss in C_sp after 2000 and 5000 cycles, respectively).     

Three New Polyoxygenated Steroids from Two Species of the South China Sea Gorgonian Muricella flexuosa and Menella verrucosa Brundin

Three new polyoxygenated steroids, muricesteroid ( 1 ), and menellsteroids A ( 2 ) and B ( 3 ), were isolated from two species of the South China Sea gorgonian Muricella flexuosa and Menella verrucosa Brundin , respectively. The structures of these new compounds were elucidated on the basis of extensive spectroscopic analysis, chemical methods and comparison with known related compounds.     

一类Narcissistic反应过渡态的优化

我们对一类narcissistic 反应XCH_2-CH_2Y→[过渡态TS]→YCH_2—CH_2X (1)进行了研究,结果表明其过渡态能在对称性限制下由能量极小化方法较容易地给出. 采用IMSPAK分子轨道从头算程序,在IBM VM/370计算机系统上用STO—3G极小基组以平衡几何构型的能量梯度优化方法,在对称性限制下对反应(1)的几种反应体系的过渡态构型进行了优化,其结果列于表1.     

NOESY技术在地胆草倍半萜内酯化合物结构鉴定中的应用（I）

明确从地胆草中分离得到的两对牦牛儿内酯型的立体异构体即地胆草种内酯（scabertopin）、异地胆草种内酯（isoscabertopin）、异去氧地胆草内酯（isodeoxyelephantopin）和去氧地胆草内酯（deoxyelephantopin）的C-2相对构型；方法 NOESY技术，并结合这4个化合物的¹H NMR，¹³C NMR，HMQC谱；结果 两对立体异构体的NOESY谱有明显差异；结论 通过分析NOESY谱，找寻H-1相关信息，若发现H-1与H-8，H-9β和14-CH₃有NOE相关，可以判断化合物的C-2为α构型，若H-1与H-5，H-7，H-3α及H-9α之间有NOE相关，则化合物的C-2为β构型.     

Detection of low caloric power of coal by pulse fast-thermal neutron analysis

This paper introduces the analysis method and principle of pulse fast-thermal neutron analysis (PFTNA). A system for the measurement of low caloric power of coal by PFTNA is also presented. The 14 MeV pulse neutron generator and BGO detector and 4096 MCA were applied in this system. A multiple linear regression method applied to the data solved the interferential problem of multiple elements. The error of low caloric power between chemical analysis and experiment was less than 0.4 MJ/kg. This revised version was published online in July 2006 with corrections to the Cover Date.     

大焦深成像系统仿真实验研究

如何增大非相干光学成像系统的焦深是应用光学研究领域的热点问题.本文对采用高次非球面光学掩模板与图像处理相结合增大成像光学系统焦深的新方法进行了深入分析,建立了大焦深成像系统仿真实验模型,并进行了大焦深成像系统仿真实验.实验结果证明了该方法在维持原相对孔径的同时使光学系统在较大的离焦范围内有好的成像质量.实际应用中还要综合考虑模板参量、信噪比等关键因素.     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

一种基于增强现实的室内漫游系统

提出了一种基于增强现实的室内漫游系统,在这个系统中用户通过HMD观察增强的视景。在这个视景中不但包含真实布景的图像,还包含有计算机生成的虚拟物体的图像。为了实现虚实场景之间的注册,在HMD上安装有两个摄像机:场景摄像机与跟踪摄像机。并且在用户所在房间的顶部安装了一系列的红外标志点,这些标志点的图像由跟踪摄像机获取,并通过位置估计算法计算用户头部的位置和姿态。另外,通过一对安装有ARtoolKit标志点的手套,实现用户与虚拟环境之间的交互。最后,一套海底漫系统被开发出来,以验证整个漫游系统的可用性     

SPC数据采集与处理系统

SPC数据采集与处理系统实现了SPC数据的计算机采集与处理 ,大大提高了SPC分析的效率与准确性 ,对推动目前国内SPC应用 ,提高产品质量管理水平具有重要的现实意义。本文具体介绍了SPC数据采集与处理系统的结构与组成及软件实现和处理功能。