Complexation of radionuclide <Superscript>152+154</Superscript>Eu(III) with alumina-bound fulvic acid studied by batch and time-resolved laser fluorescence spectroscopy

To contribute to the understanding of Eu(III) interaction preperties on hydrous alumina particles in the absence and presence of fulvic acid (FA), the complexation properties of Eu(III) with hydrous alumina, FA and FA-alumina hybrids are studied by batch and time-resolved laser fluorescence spectroscopy (TRLFS) techniques. The continuous increase in the fluorescence lifetime of Eu-alumina and Eu-FA with increasing pH indicates that the complexation is accompanied by decreasing number of hydration water in the first coordination sphere of Eu(III). Eu(III) is adsorbed onto alumina particles as outer-sphere surface complexes of ≡(Al?O)?Eu· (OH)· 7H₂O and ≡(Al?O)?Eu· 6H₂O at low pH values, and as inner-sphere surface complexes as ≡(Al?O)₂?Eu⁺· 4H₂O at high pH. In FA solution, Eu(III) forms complexes with FA as (COO)₂Eu⁺(H₂O) _x and the hydration water number in the first coordination sphere decreases with pH increasing. The formation of ≡COO?Eu?(O?Al≡)· 4H₂O is observed on FA-alumina hybrids, suggesting the formation of strong inner-sphere surface complexes in the presence of FA. The surface complexes are also characterized by their emission spectra [the ratio of emission intensities of ⁵ D ₀→⁷ F ₁ (λ=594 nm) and ⁵ D ₀→⁷ F ₂ (λ=619 nm) transitions] and their fluorescence lifetime. The findings is important to understand the contribution of FA in the complexation properties of Eu(III) on FA-alumina hybrids that the clarification of the environmental behavior of humic substances is necessary to understand fully the behavior of Eu(III), or its analogue trivalent lanthanide and actinide ions in natural environment.     

模糊数学方法在孢粉分析中的应用

运用模糊聚类分析的方法将已知的孢粉样本进行了分类 ,得到了动态聚类图 ,并利用方差分析的原理给出了最佳的分类 .     

Na2SO4 + NaCl molten salts corrosion mechanism of thermal barrier coatings used in ships

6–8 mass% Y₂O₃ stabilized ZrO₂ (6–8YSZ) thermal barrier coatings (TBCs) are widely applied to protect the hot ends of gas turbines in large navy ships. In this work, the 8YSZ TBCs were prepared by air plasma spraying technique, and their microstructure and phase composition were investigated. The hot corrosion mechanism of YSZ TBCs in molten salts consisting of 80% Na₂SO₄?+?20% NaCl at 900 °C was comprehensively analyzed. The results showed that the corrosion product Y₂(SO₄)₃ was formed due to the reaction between Na₂SO₄ media and the stabilizer Y₂O₃. As the result of the depletion of Y₂O₃ phase, the transformation from the tetragonal phase to monoclinic phase of ZrO₂ could not been totally inhibited, which consequently induced the 4–6 vol.% expansion and more cracks of YSZ TBCs. Meanwhile, the cracks could work as transfer paths for oxygen and molten salts. The kinetic analysis on hot corrosion also showed that more reaction products (from 2 to 8.1 mg cm^?1) were generated from 20 to 60 h due to more cracks generated by molten salts and oxygen infiltrating. More thermal grown oxides generated between ceramic layer, bonding layer and substrate, and the volume expansion caused by phase transition, increased the stresses in the coatings. Consequently, the peeling-off failure of 8YSZ TBCs could happen.

     

The structure and optical characters of the ZnO film grown on GaAs/Al2O3 substrate

In this paper ZnO films are grown on GaAs/Al₂O₃ substrates at different temperature by metal-organic chemical vapor deposition (MOCVD). The GaAs/Al₂O₃ substrates are formed by depositing GaAs layer (∼35 nm) on the Al₂O₃ substrate. The results of X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) demonstrate that most of the Ga and As atoms form Ga-As bond and the GaAs layer does not present any orientation. The characters of the ZnO films grown on GaAs/Al₂O₃ substrates are investigated by XRD, photoluminescence (PL), atomic force microscopy (AFM) and Raman scattering. Compared with ZnO film grown on Al₂O₃ substrate, ZnO film prepared by our fabrication scheme has good crystal and optical quality. Meanwhile its grain size becomes bigger according to the AFM image. Raman analysis indicates that the intrinsic defects and the in-plane tensile stress are obviously reduced in ZnO/GaAs/Al₂O₃ samples.     

Impact of environmental conditions on the sorption behavior of UO<Subscript>2</Subscript><Superscript>2+</Superscript> onto attapulgite studied by batch experiments

The sorption of UO₂ ²⁺ from aqueous solution on attapulgite was investigated as a function of contact time, solid content, pH, ionic strength, foreign ions, humic acid (HA), and fulvic acid (FA) under ambient conditions by using batch technique. The attapulgite sample was characterized by XRD and FTIR in detail. The results indicated that the sorption of UO₂ ²⁺ was strongly dependent on pH and ionic strength. The sorption of UO₂ ²⁺ on attapulgite increased quickly with rising pH at pH < 6.5, and decreased with increasing pH at pH > 6.5. The presence of HA or FA enhanced the sorption of UO₂ ²⁺ on attapulgite obviously at low pH because of the strong complexation of surface adsorbed HA/FA with UO₂ ²⁺ on attapulgite surface. Sorption of UO₂ ²⁺ on attapulgite was mainly dominated by ion-exchange or outer-sphere surface complexation at low pH values, but by inner-sphere surface complexation at high pH values. The results indicate that attapulgite is a very suitable adsorbent for the preconcentration and solidification of UO₂ ²⁺ from large volumes of aqueous solutions because of its negative surface charge and large surface areas.     

A near-infrared fluorescence probe for imaging of pantetheinase in cells and mice in vivo

Pantetheinase is an amidohydrolase that cleaves pantetheine into pantothenic acid and cysteamine. Functional studies have found that ubiquitous expression of this enzyme is associated with many inflammatory diseases. However, the lack of near-infrared fluorescence probes limits the better understanding of the functions of the enzyme. In this work, we have developed a new near-infrared fluorescence probe, CYLP, for bioimaging of pantetheinase by using pantothenic acid with a self-immolative linker as a recognition group. The probe produces a sensitive fluorescence off–on response at 710 nm to pantetheinase with a detection limit of 0.02 ng mL⁻¹ and can be used to image the intraperitoneal pantetheinase activity in mice in vivo. Moreover, with the probe we have observed that pantetheinase is significantly increased in the tissues of mouse inflammatory models as well as in the intestines of mice with inflammatory bowel disease. Therefore, CYLP may provide a convenient and intuitive tool for studying the role of pantetheinase in diseases.

A near-infrared fluorescence probe for detecting pantetheinase activity has been used for imaging pantetheinase in mice with inflammatory bowel disease.     

Determination of trace rotenone by UV-Vis spectrophotometry using molecularly imprinted polymer microspheres

Novel molecularly imprinted polymer microspheres for rotenone were synthesized. It is capable to adsorb rotenone from aqueous solutions. Combined with the molecularly imprinted polymer micro-spheres, conventional UV-visible spectrophotometry can be effective in determination of rotenone. The experimental conditions were discussed. Under optimum conditions, it was found that the peak of rotenone absorbance is at 298 nm. Rotenone can be determined in the range of 1–200 μg/L, the detection limit for rotenone is 0.5 μg/L. The relative standard deviation for determination of 20 μg/L of rotenone was 2.8%. The method was applied to the determination of rotenone in water samples with satisfactory results.     

Differential pulse voltammetric determination of trace rotenone using molecularly imprinted polymer microspheres

A new voltammetric method for the determination of rotenone is described. It is based on the reduction of an electroactive derivative of rotenone on the surface of an electrode. Rotenone in water was pre-concentrated using a new type of molecularly imprinted polymer microspheres and can react with hydrazine chloride to produce the electroactive derivative. The experimental conditions were discussed. Under optimum conditions, it was found that the peak potential (Ep) of the derivative of rotenone is ?1.02 V (vs. Ag/AgCl). Using the proposed procedure rotenone can be determined in the range 0.2–400 μg L^?1. The detection limit for rotenone is 0.1 μg L^?1 and the relative standard deviation for 100 μg L^?1 rotenone is 1.99 %. The method was applied to the determination of rotenone in water samples with satisfactory results.     

Stöber silica’s microporosity

Substantial knowledge gap still exists in understanding Stöber silica’s confusing microporosity. In this work, we utilized simultaneous thermal analysis coupled with Fourier transform infrared spectroscopy to characterize Stöber silica samples prepared with various post-treatments including water or ethanol washing and drying at different temperatures. The results suggest that ammonia-catalyzed ethoxylation between ethanol and silanol groups can take place during drying, and the resulting ethoxyl groups along with Si-containing oligomers may contribute to serious micropore blocking. On the other hand, water washing is effective to hydrolyze and remove these pore-blocking materials and thus enable cleared micropores. Several interesting findings including the very sharp DSC peaks, high evolving temperature of ethanol, and pyrolysis of organic matters are linked to Stöber silica’s micropores. Our work has undoubtedly improved the mechanistic understanding of Stöber silica’s microporosity and will thus facilitate the practical optimization and application of this material.

     

粉煤灰基NaA/NaX双晶型沸石分子筛构建及其协同吸附氨氮性能

以粉煤灰为原料,采用“联合改性三步合成法”——超声辅助碱熔微波晶化法联合废旧玻璃/13X晶种/NaH₂PO₄浸渍三阶段改性合成沸石分子筛(GFS);作为对比,采用传统碱熔水热法合成沸石分子筛(FS);采用“三步合成法”——超声辅助碱熔微波晶化法合成沸石分子筛(WFS)。并采用X射线衍射(XRD)、扫描电镜(SEM)、傅里叶变换红外光谱(FTIR)、能量色散光谱(EDS)、N₂吸附-脱附等方法对材料的组成、形貌和结构进行了表征。结果表明,WFS和GFS较FS具有更高的比表面积和发达的介孔、微孔,且沸石分子筛晶型从NaA单晶型转为NaA/NaX双晶型。氨氮吸附实验结果表明,GFS (56.01 mg·g^-1)较WFS (49.17 mg·g^-1)和FS (39.75 mg·g^-1)吸附性能更优,吸附动力学和热力学数据符合二级动力学模型和Langmuir模型,氨氮吸附过程为以离子交换为主的吸附,且为自发放热过程,低温促进氨氮吸附。