In situ prepared polypyrrole for low humidity QCM sensor and related theoretical calculation

In situ preparation of polypyrrole (Ppy) by photo-polymerization coated on a quartz crystal microbalance (QCM) as a low humidity sensor was reported. Different concentrations of Ppy films say 0 wt.% (as blank), 0.1, 1, and 10 wt.% were investigated to measure humidity concentrations between 14.7 and 5412.5 ppm_v. The adsorption/desorption behavior was also examined at humidity concentration 510.2 ppm_v. The sensitivities of 0, 0.1 and 1 wt.% Ppy films at 51.5 ppm_v were 0.143, 0.219 and 0.427, respectively. For 1 wt.% Ppy, the highest sensitivity was obtained. The slope and correlation coefficients (R²) for 1 wt.% Ppy at the ranges of 14.7–898.6 ppm_v were 0.0646 and 0.9909, respectively. A series of molecular simulations have been carried out to calculate bond energy for the water molecule interaction with Ppy, which was found to be 3 kcal/mol indicating the existence of hydrogen bonding during the sorption process. Based on Langmuir isotherm adsorption assumption, for 0.1 and 1 wt.% Ppy films, the association constants were 2606.30 and 5792.98, respectively. This larger association constant for 1 wt.% Ppy film explains higher sensitivity.     

Chemical composition and bioactivities of the marine alga Isochrysis galbana from Taiwan

The present study investigated the chemical composition of Isochrysis galbana Parke, a marine microalga which is widely used as a feedstock in aquaculture. From gas chromatography/mass spectrometric analysis the mono-sugar compositions of I. galbana were 2.1% fucose, 2.5% rhamnose, 2.7% arabinose, 8.5% xylose, 15.7% mannose, 32.7% galactose and 35.8% glucose. The polysaccharides of I. galbana were able to induce prointerleukin-1beta (pro-IL-1beta) protein expression within murine macrophages. Furthermore, five kinds of chlorophyll and one sterol were separated from the ethanolic extracts, including pheophorbide-a, ethyl pheophorbide-a, 10S-10-hydroxypheophytin-a, 10R-10-hydroxypheophytin-a, (132-R)-pheophytin-a, and brassicasterol. In addition, the major soluble components of the ethanol/n-hexane extract were 9-octadecenoic acid (E) (38.4%), hexadecanoic acid (23.3%), tetradecanoic acid (15.7%), and octadecanoic acid (7.2%), but only a few polyunsaturated fatty acids were found, such as 9,12,15-octadecatrienoic acid (1.9%), 9,12-octadecadienoic acid (Z,Z) (3.4%), and docosahexaenoic acid (0.2%). This is the first occasion that polysaccharides from I. galbana have been demonstrated to exert immunomodulatory properties by the induction of IL-1 within macrophages.     

Analysis of Long-Term Optical Effects in Double-Coated Optical Fibers Induced by Hydrostatic Pressure and Thermal Loading

The hydrostatic pressure and thermal loading simultaneously induced optical effects in double-coated optical fibers in the long-term are analyzed by the viscoelastic theory. Using the Laplace transformation method, close-form solutions for the microbending loss and refractive index changes are obtained. The results of the microbending loss are initially identical to those obtained by the elastic analysis, and then decrease gradually as time progresses. The microbending loss and refractive index changes of the glass fiber are functions of the material properties of the primary and secondary coatings. To minimize the microbending loss and refractive index changes in the long-term, the Young's modulus of the primary coating, and the viscosity and Poisson's ratio of the secondary coating should be increased. Nevertheless, the viscosity and Poisson's ratio of the primary coating, and the Young's modulus of the secondary coating should be decreased.     

Focusing and waveguiding of Lamb waves in micro-fabricated piezoelectric phononic plates

This paper presents results on the numerical and experimental studies of focusing and waveguiding of the lowest anti-symmetric Lamb wave in micro-fabricated piezoelectric phononic plates. The phononic structure was based on an AT-cut quartz plate and consisted of a gradient-index phononic crystal (GRIN PC) lens and a linear phononic plate waveguide. The band structures of the square-latticed AT-cut quartz phononic crystal plates with different filling ratios were analyzed using the finite element method. The design of a GRIN PC plate lens which is attached with a linear phononic plate waveguide is proposed. In designing the waveguide, propagation modes in square-latticed PC plates with different waveguide widths were studied and the results were served for the experimental design. In the micro-fabrication, deep reactive ion etching (Deep-RIE) process with a laboratory-made etcher was utilized to fabricate both the GRIN PC plate lens and the linear phononic waveguide on an 80 μm thick AT-cut quartz plate. Interdigital transducers were fabricated directly on the quartz plate to generate the lowest anti-symmetric Lamb waves. A vibro-meter was used to detect the wave fields and the measured results on the focusing and waveguiding of the piezoelectric GRIN PC lens and waveguide are in good accordance with the numerical predictions. The results of this study may serve as a basis for developing an active micro plate lens and related devices.     

A novel titanium dioxide-polydimethylsiloxane plate for phosphopeptide enrichment and mass spectrometry analysis

The phosphorylation of proteins is a major post-translational modification that is required for the regulation of many cellular processes and activities. Mass spectrometry signals of low-abundance phosphorylated peptides are commonly suppressed by the presence of abundant non-phosphorylated peptides. Therefore, one of the major challenges in the detection of low-abundance phosphopeptides is their enrichment from complex peptide mixtures. Titanium dioxide (TiO₂) has been proven to be a highly efficient approach for phosphopeptide enrichment and is widely applied. In this study, a novel TiO₂ plate was developed by coating TiO₂ particles onto polydimethylsiloxane (PDMS)-coated MALDI plates, glass, or plastic substrates. The TiO₂-PDMS plate (TP plate) could be used for on-target MALDI-TOF analysis, or as a purification plate on which phosphopeptides were eluted out and subjected to MALDI-TOF or nanoLC-MS/MS analysis. The detection limit of the TP plate was ∼10-folds lower than that of a TiO₂-packed tip approach. The capacity of the ∼2.5 mm diameter TiO₂ spots was estimated to be ∼10 μg of β-casein. Following TiO₂ plate enrichment of SCC4 cell lysate digests and nanoLC-MS/MS analysis, ∼82% of the detected proteins were phosphorylated, illustrating the sensitivity and effectiveness of the TP plate for phosphoproteomic study.     

Induction of Apoptosis by Ethanolic Extract of <em>Corchorus olitorius </em>Leaf in Human Hepatocellular Carcinoma (HepG2) Cells via a Mitochondria-Dependent Pathway

Corchorus olitorius L., is a culinary and medicinal herb, widely used as a vegetable in several countries in Asia. Many studies have shown that C. olitorius contains several antioxidants and exhibits anti-inflammatory and anti-proliferative activities in various in vitro and in vivo settings. Recently, C. olitorius has been approved for its antitumor activity; however, the underlying molecular mechanisms remain unclear. The goal of this study was to investigate the effects of ethanol extract of C. olitorius (ECO) on the growth of human hepatocellular carcinoma (HepG2) cells and gain some insights into the underlying mechanisms of its action. We found that HepG2 cells, treated with ECO for 24 h at a concentration higher than 12.5 μg/mL, displayed a strong reduction in cell viability, whereas normal FL83B hepatocytes were not affected. DNA fragmentation and nuclear condensation were evidenced by the increased subG1 population of ECO-treated HepG2 cells. ECO triggered the activation of procaspases-3 and -9 and caused the cleavage of downstream substrate, poly ADP-ribose polymerase (PARP), followed by down-regulation of the inhibitor of caspase-activated DNase (ICAD) signaling. Moreover, the increased release of cytochrome c from mitochondria with decreased membrane potential demonstrated the apoptosis induced through the caspases cascade. Our findings indicated that ECO might be effective against hepatocellular carcinoma through induction of apoptosis via mitochondria-dependent pathway.     

An inverse hyperbolic heat conduction problem in estimating surface heat flux of a living skin tissue

In this study, an inverse algorithm based on the conjugate gradient method and the discrepancy principle is applied to solve the inverse hyperbolic heat conduction problem in estimating the unknown time-dependent surface heat flux in a living skin tissue from the temperature measurements taken within the tissue. The inverse solutions will be justified based on the numerical experiments in which three different heat flux distributions are to be determined. The temperature data obtained from the direct problem are used to simulate the temperature measurements. The influence of measurement errors upon the precision of the estimated results is also investigated. Results show that an excellent estimation on the time-dependent surface heat flux can be obtained for the test cases considered in this study.     

Transient thermal loading induced optical effects in tightly jacketed double-coated optical fibers with interlayer thermal contact resistance

This article investigates the transient microbending loss and refractive index changes in a tightly jacketed double-coated optical fiber subjected to thermal loading with stress-dependent interlayer thermal contact resistance. The effects of interlayer thermal resistance on the transient microbending loss and refractive index changes of the optical fiber are analyzed and discussed. Results show that the stress-dependent interlayer thermal contact resistance increases the lateral pressure induced by the transient thermal loading in the tightly jacketed double-coated optical fiber and, thus, the microbending loss. Similarly, the interlayer thermal contact resistance increases the thermal loading induced refractive index changes in the transient state of the loading.     

Modelling of thermal conductance during microthermal machining with scanning thermal microscope using an inverse methodology

In this study, a general methodology for determining the thermal conductance between the probe tip and the workpiece during microthermal machining using Scanning Thermal Microscopy (SThM) has been proposed. The processing system was considered as an inverse heat conduction problem with an unknown thermal conductance. Temperature dependence for the material properties and thermal conductance in the analysis of heat conduction is taken into account. The conjugate gradient method is used to solve the inverse problem. Furthermore, this methodology can also be applied to estimate the thermal contact conductance in other transient heat conduction problems, like metal casting process, injection molding process, and electronic circuit systems.