Improved detectability with a polymer-based trapping device in rapid HPLC analysis for ultra-low levels of bisphenol A (BPA) in environmental samples.

A new high-performance liquid chromatography (HPLC) method has been developed to detect ultra-low concentrations of bisphenol-A (BPA) (below 1 ng/L (ppt)) using column switching electrochemical detection (ECD). The results were superior to those obtained from manual pretreatment procedure with membrane stationary phase. BPA is inherently ubiquitous in the environment, including tools and solvents used for its analysis; to obtain meaningful results, therefore, the concentration of the overall BPA contamination must be below the detection limit for BPA using the analytical system. Therefore, purified water for preparing the standard BPA solution must be filtered with a hydrophobic membrane to suppress BPA background levels of contamination. In addition, we investigated methods for effectively preserving environmental water containing BPA. The addition of a small amount of ethylenediaminetetraacetic acid (EDTA) provided good recovery even after overnight storage. By employing these precautionary measures and procedures to reduce BPA contamination from the analytical procedure, we could accurately determine l(-10) ppt of BPA in environmental water samples using a column switching HPLC system.     

Enhancement of the backscattered intensity from fractal aggregates

Comparative measurements were conducted for the backscattered intensities of light from uniform random and fractal aggregated media. Different features are found for the backscattered intensity peak shapes. A crossover between the θ^1-D and θ^-2 dependences of the backscattered intensity occurs in the case of fractal aggregated medium, where D indicates the fractal dimension.     

Improved holographic particle sizing by using absolute values of the wavelet transform

A new method for sizing particle from in-line particle holograms by using absolute values of the wavelet transform is proposed in order to improve accuracy in measurements. The proposed method provides direct calculation of the particle size by using spatial frequency information of a chirp signal at minima position of an envelope function. Simulation and experimental results are presented.     

Spacetime correlation functions of dynamic speckles produced by a series of moving phase screens

Spacetime correlation functions of the time-varying speckle intensity have been evaluated for the case where speckle patterns are produced in the Fresnel diffraction region by light propagating through a series of moving random-phase screens. The correlation functions are given by a set of recursion formulae which are useful for numerical computations. Three statistical quantities relating to the motion of speckle patterns are derived to examine the relationship between the velocity distribution of the phase screens and the temporal behaviour of resultant speckle patterns. It is found that the velocity differences between the phase screens have a strong effect on both the decorrelation of speckle patterns and the fluctuating speed of the speckle intensity.     

Specular reflectance of cold-rolled aluminum surfaces

The specular reflectance of cold-rolled aluminum surface is studied using a fiber optic system. An approximation for the determination of surface roughness is presented.     

Synthesis and ion selectivity of macrocyclic metacyclophanes analogous to spherand-type calixarenes

Novel macrocyclic compounds, hexahydroxy[1.0.1.0.1.0]- (2b) and octahydroxy[1.0.1.0.1.0.1.0]metacyclophane (2c) have been prepared in 50–70% yield by base-catalyzed condensation of 5,5-di-tert-butyl-2,2-dihydroxybiphenyl (1) with formaldehyde in refluxing xylene. An attempted alkylation of the flexible macrocycles2b and2c with ethyl bromoacetate in the presence of Cs₂CO₃ under acetonitrile reflux gave only one pure stereoisomer3 and4, respectively, while other possible isomers were not observed. The structural characterization of these products is also discussed. The two-phase solvent extraction data indicated that hexaethyl ester3 and octaethyl ester4 show strong metal affinity, comparable with that of the corresponding calix[n]arenes, and a high K⁺ selectivity was observed for octaethyl ester4.¹H-NMR titration of hexaethyl ester3 and octaethyl ester4 with KSCN clearly demonstrate that a 11 complex is formed which is stable on the NMR time scale.This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.     

Vibrational spectra and rotational isomerism of ethyl trichloroacetate

The IR and Raman spectra of ethyl trichloroacetate (E-TCA) and its deuterate (E-TCA-d₅) have been measured in the liquid, glassy and crystalline states. Vibrational assignment was made by referring to isotopic wavenumber-shift, characteristic group frequencies of related esters and with the aid of a normal coordinate calculation on E-TCA and E-TCA-d₅. It is suggested that in the liquid and glassy states there exist two molecular forms (trans—trans—trans and trans—trans—gauche) with regard to the internal rotations about the ClC---C---O---CH₂CH₃ axis, and that the former persists in the crystalline state. The band pairs of E-TCA and the other ethyl esters are discussed in relation to the nature and number of rotational axes, effect of the heavy trichloromethyl group, and enhancement of band intensity by vibrational coupling.     

Motion of redox molecules in solution monitored by the highly-sensitive EQCM technique

The behavior of redox molecules in solution that was not detected by electrochemical techniques was measured by a highly-sensitive electrochemical quartz crystal microbalance (EQCM) technique that has been improved in this study to obtain a high sensitivity of EQCM measurement in solution. The improved EQCM technique allowed to monitor the motion of a redox molecule, that is an access of the molecule to an electrode surface and repulsion from the surface during redox. An EQCM technique currently in use has measured adsorption of redox molecules on an electrode surface or polymerization on the surface caused by a chemical reaction following redox, which exhibits an enough large mass change response to detect with an EQCM measurement. However, access and repulsion of redox molecule, which is a slight motion of the molecule near on electrode surface, has not been detected and investigated by an EQCM technique, because the mass change response seems to be very small. In this study, the redox behavior of methyl viologen on a bare gold surface, pyridinethiol surface and methylpyridinethiol surface was investigated. Although the three electrodes give the same cyclic voltammogram of methyl viologen, the three are different in QCM response recorded at the same time as the voltammetry. Access/repulsion of methyl viologen within an electrical double layer was monitored by the highly-sensitive EQCM technique.     

Thermal latency of novel chelating borate catalysts as latent catalysts for epoxy–phenolic resins

Novel quaternary ammonium bis(2‐oxybenzoyloxy)borate salts ( 1a – 1c ) or quaternary ammonium bis(1,2‐benzenedioxy)borate salts ( 2a and 2b ) with tetra‐n‐butylammonium (TBA⁺), tetra‐n‐octylammonium (TOA⁺), or bis(triphenylphosphoranylidene)ammonium (PNP⁺) cations were synthesized as latent catalysts of epoxy/phenol–novolac resins by the complexation between boric acid and salicylic acid or catechol, followed by neutralization with quaternary ammonium hydroxide. Polyaddition reactions of diglycidyl ether of bisphenol A (DGEBA) and 4,4′‐bisphenol F (44BPF) or bisphenol F (BPF‐D) with the ammonium borates were investigated as model reactions of epoxy/phenol–novolac resin systems with respect to the thermal latency and storage stability of the catalyst. The polyaddition of DGEBA/44BPF with 1a – 1c in diglyme at 150 °C for 6 h proceeded up to 85–96% conversions and gave polymers with number‐average molecular weights of 4180–10,500, whereas the polyaddition at 80 °C for 6 h gave less than 8% conversions. However, the polyaddition with 2a containing TBA⁺ cation proceeded to only a 32% conversion at 150 °C for 6 h in diglyme and to a 64% conversion even at 180 °C for 6 h in triglyme and only gave low molecular weight oligomers, and no reaction proceeded in the polyaddition at 80 °C. However, polyaddition with 2b containing PNP⁺ cation proceeded up to a 96% conversion at 150 °C for 6 h in diglyme and gave a higher molecular weight polymer with a number‐average molecular weight of 8050, whereas the polyaddition at 80 °C for 6 h gave only a 5% conversion. The catalytic activity of ammonium borates 1a – 1c and 2a and 2b depended on the borate anion structure: 1a and 1c with bis(2‐oxybenzoyloxy)borate anion revealed higher activity than 2a and 2b with bis(1,2‐benzenedioxy)borate anion, respectively. In comparison with tetra‐n‐butylammonium bromide (TBAB) as a conventional ammonium salt or tetra‐n‐butylammonium tetrakis(benzoyloxy)borate (TBA‐TBB), 1a – 1c and 2b revealed better thermal latency. The catalytic activity of ammonium borates also depended on the bulkiness of the ammonium cation, and the order of activity was 1c (PNP⁺) > 1b (TOA⁺) ≧ 1a (TBA⁺) and 2b (PNP⁺) > 2a (TBA⁺). The storage stability of DGEBA/BPF‐D with the ammonium borate catalysts 1a – 1c and 2a and 2b in bulk at 40 °C was much better than that with TBAB and TBA‐TBB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2702–2716, 2002